Mechatronic Development and Vision Feedback Control of a Nanorobotics Manipulation System inside SEM for Nanodevice Assembly

Carbon nanotubes (CNT) have been developed in recent decades for nanodevices such as nanoradios, nanogenerators, carbon nanotube field effect transistors (CNTFETs) and so on, indicating that the application of CNTs for nanoscale electronics may play a key role in the development of nanotechnology. Nanorobotics manipulation systems are a promising method for nanodevice construction and assembly. For the purpose of constructing three-dimensional CNTFETs, a nanorobotics manipulation system with 16 DOFs was developed for nanomanipulation of nanometer-scale objects inside the specimen chamber of a scanning electron microscope (SEM). Nanorobotics manipulators are assembled into four units with four DOFs (X-Y-Z-θ) individually. The rotational one is actuated by a picomotor. That means a manipulator has four DOFs including three linear motions in the X, Y, Z directions and a 360-degree rotational one (X-Y-Z-θ stage, θ is along the direction rotating with X or Y axis). Manipulators are actuated by picomotors with better than 30 nm linear resolution and <1 micro-rad rotary resolution. Four vertically installed AFM cantilevers (the axis of the cantilever tip is vertical to the axis of electronic beam of SEM) served as the end-effectors to facilitate the real-time observation of the operations. A series of kinematic derivations of these four manipulators based on the Denavit-Hartenberg (D-H) notation were established. The common working space of the end-effectors is 2.78 mm by 4.39 mm by 6 mm. The manipulation strategy and vision feedback control for multi-manipulators operating inside the SEM chamber were been discussed. Finally, application of the designed nanorobotics manipulation system by successfully testing of the pickup-and-place manipulation of an individual CNT onto four probes was described. The experimental results have shown that carbon nanotubes can be successfully picked up with this nanorobotics manipulation system.

[1]  Kazuyuki Ueda,et al.  Carbon nanotube as a probe for friction force microscopy , 2002 .

[2]  Wanfeng Shang,et al.  Vision-based Nano Robotic System for High-throughput Non-embedded Cell Cutting , 2016, Scientific reports.

[3]  Yong Zhang,et al.  Automated Four-Point Probe Measurement of Nanowires Inside a Scanning Electron Microscope , 2011, IEEE Transactions on Nanotechnology.

[4]  Jian Huang,et al.  Nonlinear Disturbance Observer-Based Dynamic Surface Control of Mobile Wheeled Inverted Pendulum , 2015, IEEE Transactions on Control Systems Technology.

[5]  Reza Saeidpourazar,et al.  Towards fused vision and force robust feedback control of nanorobotic-based manipulation and grasping , 2008 .

[6]  G. Duesberg,et al.  Carbon nanotubes for interconnect applications , 2002, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

[7]  Sergej Fatikow,et al.  NanoLab: A nanorobotic system for automated pick-and-place handling and characterization of CNTs , 2009, 2009 IEEE International Conference on Robotics and Automation.

[8]  Di Zhang,et al.  Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design , 2014 .

[9]  Brandon K. Chen,et al.  A Closed-Loop Controlled Nanomanipulation System for Probing Nanostructures Inside Scanning Electron Microscopes , 2016, IEEE/ASME Transactions on Mechatronics.

[10]  Russell M. Taylor,et al.  Controlled manipulation of molecular samples with the nanoManipulator , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[11]  Fumihito Arai,et al.  3D nanorobotic manipulation of nano-order objects inside SEM , 2000, MHS2000. Proceedings of 2000 International Symposium on Micromechatronics and Human Science (Cat. No.00TH8530).

[12]  Jian Huang,et al.  Control of Upper-Limb Power-Assist Exoskeleton Using a Human-Robot Interface Based on Motion Intention Recognition , 2015, IEEE Transactions on Automation Science and Engineering.

[13]  Bradley J. Nelson,et al.  Nanorobotics for creating NEMS from 3D helical nanostructures , 2007 .

[14]  Toshio Fukuda,et al.  Dynamic Force Characterization Microscopy Based on Integrated Nanorobotic AFM and SEM System for Detachment Process Study , 2015, IEEE/ASME Transactions on Mechatronics.

[15]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[16]  Lijun Zhang,et al.  Multidirectional Image Sensing for Microscopy Based on a Rotatable Robot , 2015, Sensors.

[17]  Hui Xie,et al.  High-Efficiency Automated Nanomanipulation With Parallel Imaging/Manipulation Force Microscopy , 2012 .

[18]  W. Haensch,et al.  Toward high-performance digital logic technology with carbon nanotubes. , 2014, ACS nano.

[19]  W. Hoenlein,et al.  Carbon nanotube applications in microelectronics , 2004, IEEE Transactions on Components and Packaging Technologies.

[20]  Saurabh Chopra,et al.  Selective gas detection using a carbon nanotube sensor , 2003 .

[21]  Toshio Fukuda,et al.  CNT handling with van der Waals force inside a SEM for FET application , 2016, 2016 IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

[22]  Jun Liu,et al.  Recent advances in nanorobotic manipulation inside scanning electron microscopes , 2016, Microsystems & Nanoengineering.

[23]  Li Li,et al.  Flexible, light-weight, ultrastrong, and semiconductive carbon nanotube fibers for a highly efficient solar cell. , 2011, Angewandte Chemie.

[24]  Reza Saeidpourazar,et al.  Nano-robotic manipulation using a RRP nanomanipulator: Part B - Robust control of manipulator's tip using fused visual servoing and force sensor feedbacks , 2008, Appl. Math. Comput..

[25]  Mark S. Lundstrom,et al.  Sub-10 nm carbon nanotube transistor , 2011, 2011 International Electron Devices Meeting.

[26]  W. Tuan,et al.  Transfer of patterned vertically aligned carbon nanotubes onto plastic substrates for flexible electronics and field emission devices , 2009 .

[27]  Fumihito Arai,et al.  Nanorobotic Systems , 2005 .

[28]  Fumihito Arai,et al.  Assembly of nanodevices with carbon nanotubes through nanorobotic manipulations , 2003, Proc. IEEE.