Impulse Strength of High Voltage Motor Coil Turn Insulation
暂无分享,去创建一个
Breakdown of the turn insulation in large ac motors eventually leads to the failure of the stator winding. The turn insulation can fail if the motor coils are subjected to steep-fronted surges. The impulse strength of the turn insulation was determined for fifty-three typical coils procured from different manufacturers and tested singly in air. The coils had six different insulation systems and their specifications (voltage, power, size, turns, strands etc) cover a very wide range. Most coils were found to have an impulse strength exceeding 5 times peak line-to-ground voltage (5 pu).
[1] G.C. Stone,et al. Investigation of Turn Insulation Failure Mechanisms in Large AC Motors , 1984, IEEE Transactions on Power Apparatus and Systems.
[2] K. J. Cornick,et al. Steep-fronted switching voltage transients and their distribution in motor windings. Part 2: Distribution of steep-fronted switching voltage transients in motor windings , 1982 .
[3] R. Dhariwal,et al. Testing of Electrical Machine Stator Coils Using Sharp-Fronted Impulse Voltage , 1984, IEEE Transactions on Electrical Insulation.