Analysis of the Effects of the Nuclear Heat Load on the ITER TF Magnets Temperature Margin

In the International Thermonuclear Experimental Reactor, the nuclear radiation escaping from the vacuum vessel reaches the superconducting toroidal field (TF) magnets, affecting the temperature margin ΔTmar, that is, the difference between the current sharing temperature and the operating temperature. The TF magnets are designed to operate at a minimum margin ΔTmarmin = 0.7 K. Recent design activity on in-vessel components, for example, blanket, in-vessel coils for plasma stability, suggests a potential enhancement of the nuclear heat load, leading to a reduction of ΔTmar, which is accurately assessed in the paper using the validated 4C code. For the case when the margin goes below the minimum, different possible mitigation strategies are investigated: the first considers the possible reduction of the He bath temperature from the nominal 4.3 K down to 3.8 K, and is proven to be successful. The others consider the possible increase of the dwell time between plasma pulses, and is shown to be inadequate, or the decrease of plasma pulse duration, which turns out to be effective below 300 s.

[1]  R. Zanino,et al.  Mitigation of the Temperature Margin Reduction due to the Nuclear Radiation on the ITER TF Coils , 2013, IEEE Transactions on Applied Superconductivity.

[2]  Roberto Zanino,et al.  4C code analysis of thermal-hydraulic transients in the KSTAR PF1 superconducting coil , 2013 .

[3]  C. Hoa,et al.  Verification of the predictive capabilities of the 4C code cryogenic circuit model , 2014 .

[4]  R. Zanino,et al.  Parametric Analysis of the ITER TF Fast Discharge Using the 4C Code , 2012, IEEE Transactions on Applied Superconductivity.

[5]  Francesco Casella,et al.  The 4C code for the cryogenic circuit conductor and coil modeling in ITER , 2010 .

[6]  R. Zanino,et al.  Validation of the 4C Thermal-Hydraulic Code Against 25 kA Safety Discharge in the ITER Toroidal Field Model Coil (TFMC) , 2011, IEEE Transactions on Applied Superconductivity.

[7]  Francesco Casella,et al.  Dynamic modeling of a supercritical helium closed loop with the 4C code , 2012 .

[8]  R. Zanino,et al.  Thermal-hydraulic simulation of 80 kA safety discharge in the ITER Toroidal Field Model Coil (TFMC) using the 4C code , 2011, 2011 IEEE/NPSS 24th Symposium on Fusion Engineering.

[9]  Luca Bottura,et al.  JC (B, T, ε) Parameterization for the ITER Nb3Sn Production , 2009 .

[10]  Roberto Zanino,et al.  Modeling of W7-X superconducting coil cool-down using the 4C code , 2011 .

[12]  Roberto Zanino,et al.  Quench Analysis of an ITER TF Coil , 2010 .

[13]  L. Bottura,et al.  $J_{C}(B,T,\varepsilon)$ Parameterization for the ITER ${\rm Nb}_{3}{\rm Sn}$ Production , 2009, IEEE Transactions on Applied Superconductivity.

[14]  A. R. Raffray,et al.  ITER blanket engineering challenges and solutions , 2013, 2013 IEEE 25th Symposium on Fusion Engineering (SOFE).