Process parameter optimization of screen printing device for vacuum glazing pillar arrays

[2]  Y. S. Tarng,et al.  Design optimization of cutting parameters for turning operations based on the Taguchi method , 1998 .

[3]  Jeongdai Jo,et al.  Development of a gravure offset printing system for the printing electrodes of flat panel display , 2010 .

[4]  T. Muthuramalingam,et al.  Application of Taguchi-grey multi responses optimization on process parameters in electro erosion , 2014 .

[5]  Yu-Cheng Lin,et al.  Optimization of screen-printing parameters of SN9000 ink for pinholes using Taguchi method in chip on film packaging , 2011 .

[6]  Hywel Rhys Thomas,et al.  Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept , 2014 .

[7]  R Fisher,et al.  Design of Experiments , 1936 .

[8]  Leon Poladian,et al.  Heat conduction through support pillars in evacuated windows , 1991 .

[9]  Hung-Wen Lin,et al.  The rheological behaviors of screen-printing pastes , 2008 .

[10]  Optimization of Ingredients for Vacuum Glazing Pillar Using DOE , 2012 .

[11]  Richard Edward Collins,et al.  Design of support pillar arrays in flat evacuated windows , 1991 .

[12]  Tsung-Nan Tsai,et al.  Improving the fine-pitch stencil printing capability using the Taguchi method and Taguchi fuzzy-based model , 2011 .

[13]  D.-H. Lee,et al.  Highly efficient phosphorescent polymer OLEDs fabricated by screen printing , 2008, Displays.

[14]  Biswanath Doloi,et al.  Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis , 2011 .

[15]  A. Kumaraswamy,et al.  Experimental Studies on Effect of Temperature and Strain Rate on Deformation Behaviour of Ti-6Al-4V Using Taguchi Method☆ , 2014 .