Measuring and Imaging Permittivity of Insulators Using High-Frequency Eddy-Current Devices

This paper shows that the high-frequency eddy-current (HFEC) measurement devices can be used not only for characterizing conductivity and magnetic permeability related properties of electrically conductive materials, but also for permittivity characterization of insulators. Maxwell's equations, finite-element method simulations, and experimental research are applied to support this hypothesis. An industrial HFEC device is used to measure the change of dielectric properties during the curing process of the epoxy resin L20. The measurement results are in good agreement with the expected behavior of the parameters relative permittivity and tan δ during cure. Using a capacitive reference device, similar characteristics regarding the change of the complex permittivity of the resin can be observed. In addition, HFEC imaging results on polymethyl methacrylate are presented, discussed, and compared with capacitive imaging. HFEC permittivity mapping benefits from a high spatial resolution with a sensitivity and penetration depth that is at least comparable with those of capacitive imaging technology.

[1]  H. Block.  The nature and application of electrical phenomena in polymers , 1979 .

[2]  Matteo Pastorino,et al.  Recent inversion procedures for microwave imaging in biomedical, subsurface detection and nondestructive evaluation applications , 2004 .

[3]  C. Ober,et al.  Orientation of Liquid Crystalline Epoxides under ac Electric Fields , 1997 .

[4]  Christian A. Martin,et al.  Electric field-induced aligned multi-wall carbon nanotube networks in epoxy composites , 2005 .

[5]  J. Delmonte.  Electrical properties of epoxy resins during polymerization , 1959 .

[6]  Geoff G. DIAMOND,et al.  A New Capacitive Imaging Technique for NDT , .

[7]  Sergey Kharkovsky,et al.  Microwave and millimetre wave sensors for crack detection , 2008 .

[8]  A. W. Kraszewski,et al.  Microwave Aquametry—A Review , 1980 .

[9]  M. Raghavan,et al.  An overview of dielectric properties measuring techniques , 2005 .

[10]  P N Scharbach,et al.  A Dynamical Theory of the Electromagnetic Field , 1983 .

[11]  Z. Mottl,et al.  The quantitative relations between true and standard depth of penetration for air-cored probe coils in eddy current testing , 1990 .

[12]  Guoming Chen,et al.  Investigations into the measurement sensitivity distribution of coplanar capacitive imaging probes , 2013 .

[13]  Keiji Ogi,et al.  Eddy Current, Ultrasonic C-Scan and Scanning Acoustic Microscopy Testing of Delaminated Quasi-Isotropic CFRP Materials: A Case Study , 1998 .

[14]  Setz,et al.  Magnetic Field Orientation of Liquid Crystalline Epoxy Thermosets. , 1998, Macromolecules.

[15]  E. Tombari,et al.  Measurement method and apparatus for monitoring the kinetics of polymerization and crosslinking reactions by microwave dielectrometry , 1990 .

[16]  J. Mijovic,et al.  Comparative calorimetric study of epoxy cure by microwave vs thermal energy , 1990 .

[17]  F. Starzyk.  Parametrisation of interdigit comb capacitor for dielectric impedance spectroscopy , 2008 .

[18]  J. Shea.  Electrical Properties of Polymers, 2nd edition [Book Review] , 2007, IEEE Electrical Insulation Magazine.

[19]  Wael W. El-Dakhakhni,et al.  Non-destructive evaluation of laminated composite plates using dielectrometry sensors , 2009 .

[20]  J. Mijovic,et al.  Dielectric spectroscopy of reactive polymers , 1998 .

[21]  André Yashan.  Über die Wirbelstromprüfung und magnetische Streuflussprüfung mittels GMR-Sensoren , 2008 .

[22]  G. Levita,et al.  Calorimetric and microwave dielectric monitoring of epoxy resin cure , 1990 .

[23]  P. S. Pathak,et al.  Nondestructive superresolution imaging of defects and nonuniformities in metals, semiconductors, dielectrics, composites, and plants using evanescent microwaves , 1999 .

[24]  Norbert Meyendorf,et al.  Non-destructive evaluation (NDE) of composites: eddy current techniques , 2013 .

[25]  S. Senturia,et al.  Chemical interpretation of the relaxed permittivity during epoxy resin cure , 1986 .

[26]  A. R. Blythe,et al.  Electrical properties of polymers , 1979 .

[27]  Luigi Nicolais,et al.  The principles of dielectric measurements for in situ monitoring of composite processing , 1993 .

[28]  S. Delos,et al.  Use of the frequency dependence of the impedance to monitor viscosity during cure , 1989 .

[29]  K. Wapenaar,et al.  Non-destructive inspection of carbon fibre-reinforced plastics using eddy current methods , 1992 .

[30]  Norman F. Sheppard,et al.  Dielectric Analysis of Thermoset Cure. , 1986 .

[31]  G. Mook,et al.  Structural analysis of CFRP using eddy current methods , 1994 .

[32]  J Hansen.  The eddy current inspection method. Part 2. The impedance plane and probes , 2004 .

[33]  Javier García-Martín,et al.  Non-Destructive Techniques Based on Eddy Current Testing , 2011, Sensors.

[34]  K. Schulte,et al.  Alternating electric field induced agglomeration of carbon black filled resins , 2002 .

[35]  Dieter Joneit,et al.  Correction of eddy current measurements to obtain accordance with simulation results , 2014 .

[36]  Y. Tajima.  Monitoring cure viscosity of epoxy composite , 1982 .

[37]  D. J. Hagemaier.  Eddy current standard depth of penetration , 1985 .

[38]  Charles Hellier,et al.  Handbook of Nondestructive Evaluation , 2001 .

[39]  Nasser Qaddoumi,et al.  Defect imaging and characterization in composite structures using near-field microwave nondestructive testing techniques , 2003 .

[40]  Norbert Meyendorf,et al.  High-resolution eddy current sensor system for quality assessment of carbon fiber materials , 2010 .

[41]  N. Karpowicz,et al.  Damage and defect inspection with terahertz waves , 2006 .

[42]  L. Diener,et al.  Microwave near-field imaging with open-ended waveguide—Comparison with other techniques of nondestructive testing , 1995 .

[43]  Reza Zoughi,et al.  Microwave non-destructive testing and evaluation , 2000 .

[44]  R. Pethrick.  Non-destructive evaluation (NDE) of composites: dielectric techniques for testing partially or non-conducting composite materials , 2013 .

[45]  A. Bulavinov,et al.  NDT for CFRP Aeronautical Components – A Comparative Study , 2010 .