Modeling reinforced concrete structures using coupling finite elements for discrete representation of reinforcements

Abstract This paper presents an alternative methodology to represent rebars and their bond-slip behavior against concrete based on coupling finite elements. Among the main features and advantages of the proposed technique are: (i) the coupling between the two independent meshes for concrete and reinforcement does not introduce any additional degree of freedom in the global problem; (ii) both rigid and non-rigid coupling can be used to represent the particular cases of perfect adherence and general bond-slip behavior, respectively; (iii) rebars of arbitrary geometry and orientation can be modeled; (iv) the methodology can be applied to 2D and 3D problems and (v) the formulation can be adapted to other type of finite elements and implemented easily in any existing FEM code. Constitutive models based on continuum damage mechanics are used to represent the concrete behavior and concrete-rebar interaction. A number of numerical analyses are performed and the results obtained show the versatility and accuracy of the proposed methodology.

[1]  O. Zienkiewicz,et al.  FINITE ELEMENT NON-LINEAR ANALYSIS OF CONCRETE STRUCTURES. , 1976 .

[2]  Joaquim Figueiras,et al.  Finite element analysis of reinforced and prestressed concrete structures including thermal loading , 1983 .

[3]  Miguel Cervera,et al.  A RATE-DEPENDENT ISOTROPIC DAMAGE MODEL FOR THE SEISMIC ANALYSIS OF CONCRETE DAMS , 1996 .

[4]  D. Ngo,et al.  Finite Element Analysis of Reinforced Concrete Beams , 1967 .

[5]  F. J. Vecchio,et al.  Nonlinear Analysis of Reinforced-Concrete Shells , 1993 .

[6]  George Z. Voyiadjis,et al.  Study of Layering Procedures in Finite-Element Analysis of RC Flexural and Torsional Elements , 1995 .

[7]  Günter Hofstetter,et al.  Experimental verification of a constitutive model for concrete cracking , 2001 .

[8]  Y. M. Cheng,et al.  Modeling of reinforcement in concrete and reinforcement confinement coefficient , 1993 .

[9]  Osvaldo L. Manzoli,et al.  A mixture theory based method for three-dimensional modeling of reinforced concrete members with embedded crack finite elements , 2008 .

[10]  Manolis Papadrakakis,et al.  An efficient generation method of embedded reinforcement in hexahedral elements for reinforced concrete simulations , 2012, Adv. Eng. Softw..

[11]  William C. Schnobrich,et al.  Nonlinear finite element analysis of reinforced concrete plates and shells under monotonic loading , 1991 .

[12]  Benjamin Richard,et al.  A multi-fiber approach for modeling corroded reinforced concrete structures , 2011 .

[13]  Fariborz Barzegar,et al.  Generating Reinforcement in FE Modeling of Concrete Structures , 1994 .

[14]  Frank J. Vecchio,et al.  Reinforced Concrete Membrane Element Formulations , 1990 .

[15]  Alaa E. Elwi,et al.  Finite Element Model for Curved Embedded Reinforcement , 1989 .

[16]  H. Schäfer,et al.  A contribution to the solution of contact problems with the aid of bond elements , 1975 .

[17]  Liyong Tong,et al.  Nonlinear analyses of axisymmetric reinforced concrete structures , 2000 .

[18]  W. F. Chen,et al.  Nonlinear Finite Element Analysis of Reinforced Concrete Panels , 1987 .

[19]  Farriborz Barzegar,et al.  ANALYSIS OF RC MEMBRANE ELEMENTS WITH ANISOTROPIC REINFORCEMENT , 1989 .

[20]  Nasreddin El-Mezaini,et al.  Finite Element Analysis of Prestressed and Reinforced Concrete Structures , 1991 .

[21]  Fariborz Barzegar,et al.  Three-dimensional modeling of concrete structures. II: Reinforced concrete , 1997 .

[22]  Benjamin Richard,et al.  A three-dimensional steel/concrete interface model including corrosion effects , 2010 .

[23]  Luís A.G. Bitencourt,et al.  A coupling technique for non-matching finite element meshes , 2015 .

[24]  Luís A.G. Bitencourt,et al.  Failure behavior modeling of slender reinforced concrete columns subjected to eccentric load , 2015 .