Characterization of corrosion products formed on steels in the first months of atmospheric exposure

The corrosion products of carbon steel and weathering steel exposed to three different types of atmospheres, at times ranging from one to three months, have been identified. The steels were exposed in an industrial site, an urban site (Sao Paulo City, Brazil), and a humid site. The effect of the steel type on the corrosion products formed in the early stages of atmospheric corrosion has been evaluated. The corrosion products formed at the various exposure locations were characterized by Raman microscopy, X-Ray diffraction (XRD) and their morphology was observed by Scanning Electron Microscopy (SEM). Three regions of different colours (yellow, black and red) have been identified over the steel coupons by Raman microscopy. Analysis carried out on each of these areas led to the characterization of the correspondent oxide/hydroxide phases. The main phases present were lepidocrocite (g-FeOOH) and goethite (a-FeOOH). Small amounts of magnetite (Fe3O4) were also eventually encountered.

[1]  B. Kuban,et al.  Characteristics of the Rust from Weathering Steels in Louisiana Bridge Spans , 1986 .

[2]  Dalva Lúcia Araújo de Faria,et al.  Raman microspectroscopy of some iron oxides and oxyhydroxides , 1997 .

[3]  Desmond C. Cook,et al.  Characterization of Iron Oxides Commonly Formed as Corrosion Products on Steel , 1998 .

[4]  A. Răzvan,et al.  Morphology of Rust Phases Formed on Weathering Steels during Outdoor Atmospheric Exposure in Sheltered Locations under the Bridges / Morphologie der auf „Weathering“-Stählen unter atmosphärischen Bedingungen an geschützten Standorten unter Brücken gebildeten Rostphasen , 1987 .

[5]  D. Thierry,et al.  In‐Situ Raman Spectroscopy Combined with X‐Ray Photoelectron Spectroscopy and Nuclear Microanalysis for Studies of Anodic Corrosion Film Formation on Fe‐Cr Single Crystals , 1988 .

[6]  Seifollah Nasrazadani,et al.  Morphology of rust phases formed on weathering steels in various laboratory corrosion tests , 1989 .

[7]  D. Thierry,et al.  Raman spectroscopy and XPS investigations of anodic corrosion films formed on FeMo alloys in alkaline solutions , 1991 .

[8]  Chris W. Brown,et al.  Raman Spectra of Possible Corrosion Products of Iron , 1978 .

[9]  T. Misawa,et al.  The mechanism of formation of iron oxide and oxyhydroxides in aqueous solutions at room temperature , 1974 .

[10]  A. Razvan,et al.  Morphology of Rust Phases Formed on Naturally Weathered Weathering Steels in Bridge Spans / Morphologie der unter natürlichem Witterungseinfluß auf „Weathering‘-Stählen gebildeten Rostphasen , 1986 .

[11]  T. Misawa,et al.  Protective Rust Layer Formed on Weathering Steel by Atmospheric Corrosion for a Quarter of a Century , 1993 .

[12]  N. Sato,et al.  Raman Spectroscopy of Thin Corrosion Films on Iron at 100 to 150 C in Air , 1986 .

[13]  J. Marco,et al.  Characterization of the corrosion products formed on carbon steel after exposure to the open atmosphere in the Antarctic and Easter Island , 2000 .

[14]  Clifford Goodman,et al.  American Society for Testing and Materials , 1988 .