Highly Flexible and Conductive Printed Graphene for Wireless Wearable Communications Applications

In this paper, we report highly conductive, highly flexible, light weight and low cost printed graphene for wireless wearable communications applications. As a proof of concept, printed graphene enabled transmission lines and antennas on paper substrates were designed, fabricated and characterized. To explore its potentials in wearable communications applications, mechanically flexible transmission lines and antennas under various bended cases were experimentally studied. The measurement results demonstrate that the printed graphene can be used for RF signal transmitting, radiating and receiving, which represents some of the essential functionalities of RF signal processing in wireless wearable communications systems. Furthermore, the printed graphene can be processed at low temperature so that it is compatible with heat-sensitive flexible materials like papers and textiles. This work brings a step closer to the prospect to implement graphene enabled low cost and environmentally friendly wireless wearable communications systems in the near future.

[1]  Alberto Valdes Garcia,et al.  Graphene radio frequency receiver integrated circuit , 2014, Nature Communications.

[2]  M. Hersam,et al.  Inkjet Printing of High Conductivity, Flexible Graphene Patterns. , 2013, The journal of physical chemistry letters.

[3]  Liangbing Hu,et al.  Carbon nanotube thin films: fabrication, properties, and applications. , 2010, Chemical reviews.

[4]  A. Ferrari,et al.  Inkjet-printed graphene electronics. , 2011, ACS nano.

[5]  Michael S. Lekas,et al.  Graphene mechanical oscillators with tunable frequency. , 2013, Nature nanotechnology.

[6]  Thomas M. Higgins,et al.  Silver Nanowire Networks as Flexible, Transparent, Conducting Films: Extremely High DC to Optical Conductivity Ratios. , 2009, ACS nano.

[7]  Cédric Cochrane,et al.  Design and Development of a Flexible Strain Sensor for Textile Structures Based on a Conductive Polymer Composite , 2007, Sensors (Basel, Switzerland).

[8]  K. Novoselov,et al.  Binder-free highly conductive graphene laminate for low cost printed radio frequency applications , 2015 .

[9]  L. Vallozzi,et al.  A Textile Antenna for Off-Body Communication Integrated Into Protective Clothing for Firefighters , 2009, IEEE Transactions on Antennas and Propagation.

[10]  Y Bayram,et al.  E-Textile Conductors and Polymer Composites for Conformal Lightweight Antennas , 2010, IEEE Transactions on Antennas and Propagation.

[11]  R. Service.  Electronic Textiles Charge Ahead , 2003, Science.

[12]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[13]  Joseph J. Carr.  The Technician's Radio Receiver Handbook: Wireless and Telecommunication Technology , 2001 .

[14]  David J. Finn,et al.  Inkjet deposition of liquid-exfoliated graphene and MoS2 nanosheets for printed device applications , 2014 .

[15]  J. S. Gomez-Diaz,et al.  Microwave to THz properties of graphene and potential antenna applications , 2012, 2012 International Symposium on Antennas and Propagation (ISAP).

[16]  J. Coleman,et al.  High-concentration, surfactant-stabilized graphene dispersions. , 2010, ACS nano.

[17]  W. Haensch,et al.  High-frequency graphene voltage amplifier. , 2011, Nano letters.

[18]  S. Magdassi,et al.  Conductive nanomaterials for printed electronics. , 2014, Small.

[19]  R. Langley,et al.  Dual-Band Wearable Textile Antenna on an EBG Substrate , 2009, IEEE Transactions on Antennas and Propagation.

[20]  Xiaojun Zeng,et al.  A New Transparent Conductor: Silver Nanowire Film Buried at the Surface of a Transparent Polymer , 2010, Advanced materials.

[21]  Anna De Girolamo Del Mauro,et al.  Polymer solar cells with inkjet‐printed doped‐PEDOT: PSS anode , 2013 .

[22]  Yongsheng Chen,et al.  Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors , 2011 .

[23]  Elizabeth M. Belding-Royer,et al.  A review of current routing protocols for ad hoc mobile wireless networks , 1999, IEEE Wirel. Commun..

[24]  Thomas Y. Hsiang,et al.  Extraction of Subterahertz Transmission-line Parameters of Coplanar Waveguides , 2007 .

[25]  Sherali Zeadally,et al.  Toward self-authenticable wearable devices , 2015, IEEE Wireless Communications.

[26]  K. Mohanram,et al.  Triple-mode single-transistor graphene amplifier and its applications. , 2010, ACS nano.

[27]  Horst Kober,et al.  STELLA - STretchable ELectronics for Large Area Applications - A New Technology for Smart Textiles , 2008 .

[28]  Han Wang,et al.  Graphene-Based Ambipolar RF Mixers , 2010, IEEE Electron Device Letters.

[29]  C. Dimitrakopoulos,et al.  Wafer-Scale Graphene Integrated Circuit , 2011, Science.

[30]  Jacob J. Adams,et al.  Stretchable and reversibly deformable radio frequency antennas based on silver nanowires. , 2014, ACS applied materials & interfaces.

[31]  Noppin Anantrasirichai,et al.  Design CPW Fed Slot Antenna for Wideband Applications , 2007 .

[32]  Keqian Zhang,et al.  Electromagnetic Theory for Microwaves and Optoelectronics , 2007 .

[33]  E. Pop,et al.  Gigahertz integrated graphene ring oscillators. , 2013, ACS nano.

[34]  M. Klemm,et al.  Textile UWB Antennas for Wireless Body Area Networks , 2006, IEEE Transactions on Antennas and Propagation.

[35]  Z. Zhong,et al.  Flexible and transparent all-graphene circuits for quaternary digital modulations. , 2012, Nature communications.

[36]  David C. Martin,et al.  Polymerization of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) around living neural cells. , 2007, Biomaterials.

[37]  M. Muhammed,et al.  Efficient Inkjet Printing of Graphene , 2013, Advanced materials.

[38]  P. S. Hall,et al.  Antennas and propagation for body centric communications , 2006, 2006 First European Conference on Antennas and Propagation.