Bone cement with a modified polyphosphate network structure stimulates hard tissue regeneration

In this study, a calcium polyphosphate cement (CpPC) consisting of basic components was investigated to assess its potential for hard tissue regeneration. The added basic components for improving the structural stability, which controlled the setting time, where the setting reaction resulted in the formation of amorphous structure with a re-constructed polyphosphate. Moreover, the characteristics were controlled by the composition, which determined the polyphosphate structure. CpPC exhibited outstanding dissolution rate compared with the common biodegradable cement, brushite cement (2.5 times). Despite high amounts of dissolution products, no significant cytotoxicity ensued. Induction of calcification in MG-63 cells treated with CpPC, the level of calcification increased with increasing CpPC dissolution rate. Induced calcification was observed also in CpPC-treated ST2 cells, in contrast with MG-63 and ST2 treated with brushite cement, for which no calcification was observed. In vivo tests using a rat calvarial defect model showed that resorbed CpPC resulted in favorable host responses and promoted bone formation. Additionally, there was a significant increase in defect closure, and new bone formation progressed from CpPC mid-sites as well as defect margins. From these results, CpPC exhibits significant potential as biodegradable bone substitute for bone regeneration.

[1]  Zhipeng Gu,et al.  Application of strontium doped calcium polyphosphate bioceramic as scaffolds for bone tissue engineering , 2013 .

[2]  Wen‐Cheng Chen,et al.  In vivo testing of nanoparticle-treated TTCP/DCPA-based ceramic surfaces. , 2009, Acta biomaterialia.

[3]  Xixun Yu,et al.  Degradation kinetics of calcium polyphosphate bioceramic: an experimental and theoretical study , 2009 .

[4]  Changsheng Liu,et al.  The effect of polymeric chain-like structure on the degradation and cellular biocompatibility of calcium polyphosphate , 2008 .

[5]  L. Grover,et al.  In vitro biodegradation of three brushite calcium phosphate cements by a macrophage cell-line. , 2006, Biomaterials.

[6]  Seong-Ho Choi,et al.  The effect of a fibrin-fibronectin/beta-tricalcium phosphate/recombinant human bone morphogenetic protein-2 system on bone formation in rat calvarial defects. , 2006, Biomaterials.

[7]  T. Troczynski,et al.  In-situ preparation of poly(propylene fumarate)--hydroxyapatite composite. , 2005, Biomaterials.

[8]  C. V. van Blitterswijk,et al.  Bone tissue engineering on amorphous carbonated apatite and crystalline octacalcium phosphate-coated titanium discs. , 2005, Biomaterials.

[9]  T. Kohgo,et al.  Induction of Calcification in MC3T3-E1 Cells by Inorganic Polyphosphate , 2004, Journal of dental research.

[10]  Da-hui Wang,et al.  Dissolution mechanism and release kinetics of phosphate controlled release glasses in aqueous medium. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[11]  L. Grover,et al.  Ionic modification of calcium phosphate cement viscosity. Part II: hypodermic injection and strength improvement of brushite cement. , 2004, Biomaterials.

[12]  J C Knowles,et al.  In vitro ageing of brushite calcium phosphate cement. , 2003, Biomaterials.

[13]  M. Bohner,et al.  Compositional changes of a dicalcium phosphate dihydrate cement after implantation in sheep. , 2003, Biomaterials.

[14]  M. Bohner,et al.  Compositional changes of a brushite hydraulic cement after implantation in sheep , 2003 .

[15]  R. Legeros,et al.  Properties of osteoconductive biomaterials: calcium phosphates. , 2002, Clinical orthopaedics and related research.

[16]  R. Kandel,et al.  Porous calcium polyphosphate scaffolds for bone substitute applications -- in vitro characterization. , 2001, Biomaterials.

[17]  J. Keating,et al.  Substitutes for autologous bone graft in orthopaedic trauma. , 2001, The Journal of bone and joint surgery. British volume.

[18]  Richard K. Brow,et al.  Review: the structure of simple phosphate glasses , 2000 .

[19]  N. Athanasou,et al.  The pathology of bone allograft. , 1999, The Journal of bone and joint surgery. British volume.

[20]  J A Planell,et al.  Addition of cohesion promotors to calcium phosphate cements. , 1999, Biomaterials.

[21]  C. Rey,et al.  Resorbable calcium phosphate bone substitute. , 1998, Journal of biomedical materials research.

[22]  H. Yamamoto,et al.  Mechanical strength of calcium phosphate cement in vivo and in vitro. , 1998, Biomaterials.

[23]  J. Fages,et al.  Short-term implantation effects of a DCPD-based calcium phosphate cement. , 1998, Biomaterials.

[24]  J O Hollinger,et al.  Role of bone substitutes. , 1996, Clinical orthopaedics and related research.

[25]  M. Bohner,et al.  Resorption of, and bone formation from, new beta-tricalcium phosphate-monocalcium phosphate cements: an in vivo study. , 1996, Journal of biomedical materials research.

[26]  K. Asaoka,et al.  Non-decay type fast-setting calcium phosphate cement: composite with sodium alginate. , 1995, Biomaterials.

[27]  C. Misch,et al.  BONE‐GRAFTING MATERIALS IN IMPLANT DENTISTRY , 1993, Implant dentistry.

[28]  C J Damien,et al.  Bone graft and bone graft substitutes: a review of current technology and applications. , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[29]  L. E. Kukacka,et al.  Characteristics of magnesium polyphosphate cements derived from ammonium polyphosphate solutions , 1983 .