Numerical simulation of THM growth of CdTe in presence of rotating magnetic fields (RMF)

Abstract The influence of rotating magnetic fields (RMF) on flow pattern and compositional uniformity in the solution zone of a traveling heater method (THM) system for growth of CdTe is numerically investigated. The analysis is conducted at the 10 −6 and 10 −1 g 0 as representative of space and ground processing conditions. It is shown that under microgravity conditions application of RMF can be used to overwhelm residual buoyancy-induced convection and to control the uniformity of solution-zone composition at the growth front without appreciable modification of the growth interface shape. At high-gravity levels, RMF is found not to be able to completely dominate buoyancy-induced convection. In this regime, for the range of field strengths studied, RMF is found to result in (a) complex flow structures in the solution zone, (b) enhancement of compositional nonuniformities at the growth front, and (c) increased convexity of the growth interface. A scaling analysis of convection in the solution zone is used to generate a nondimensional map delineating the RMF- and gravity-dominated flow regimes.

[1]  Peter Davidson,et al.  Swirling recirculating flow an a liquid-metal column generated by a rotating magnetic field , 1987, Journal of Fluid Mechanics.

[2]  Y. Gelfgat,et al.  Liquid metal flow in a finite-length cylinder with a rotating magnetic field , 1993 .

[3]  K. Schwerdtfeger,et al.  Single crystal growth with the Czochralski method involving rotational electromagnetic stirring of the melt , 1994 .

[4]  P. Dold,et al.  Convective Temperature Fluctuations in Liquid Gallium in Dependence on Static and Rotating Magnetic Fields , 1995 .

[5]  P. Rudolph,et al.  Investigation of convection in the solution zone at the growth of CdTe by THM , 1985 .

[6]  N. Ono,et al.  A Numerical Study of the Effects of Electromagnetic Stirring on the Distributions of Temperature and Oxygen Concentration in Silicon Double‐Crucible Czochralski Processing , 1997 .

[7]  M. Volz,et al.  Flow transitions in a rotating magnetic field , 1996 .

[8]  Y. Apanovich,et al.  The numerical simulation of heat and mass transfer during growth of a binary system by the travelling heater method , 1991 .

[9]  K. Benz,et al.  CdTe and CdTe0.9Se0.1 crystals grown by the travelling heater method using a rotating magnetic field , 1994 .

[10]  Ruby Krishnamurti,et al.  Some further studies on the transition to turbulent convection , 1973, Journal of Fluid Mechanics.

[11]  C. J. Chang,et al.  Finite element thermal analysis on the crystal growth of HgCdTe by the travelling heater method , 1989 .

[12]  L. Golonka,et al.  Thermodynamic Analysis of the HgTe ‐ CdTe ‐ Te System Using the Simplified RAS Model , 1981 .

[13]  G. Gerbeth,et al.  Modelling of the isothermal melt flow due to rotating magnetic fields in crystal growth , 1997 .

[14]  Y. Ishizawa,et al.  The incorporation of convection in 1D models of float zone and traveling solvent techniques , 1996 .

[15]  K. Benz,et al.  CdTe crystal growth in the soviet facility ZONA 4 , 1992 .