Effect of Ni Addition on Microstructure and Tribological Properties of Plasma-Sprayed MoSi2 Coatings

[1]  Dezhi Wang,et al.  High temperature oxidation and microstructure of MoSi 2 /MoB composite coating for Mo substrate , 2017 .

[2]  Xinghong Zhang,et al.  Oxidative protection of a carbon-bonded carbon fiber composite with double-layer coating of MoSi2-SiC whisker and TaSi2-MoSi2-SiC whisker by slurry method , 2017 .

[3]  S. Ray,et al.  Interfacial characterization in ductile refractory metals reinforced MoSi2 based laminated composites , 2017 .

[4]  Yanan Liu,et al.  Frictional behavior and wear resistance performance of gradient cermet composite tool materials sliding against hard materials , 2017 .

[5]  Y. Xiang,et al.  Microstructure and oxidation protection of a MoSi2/SiO2-B2O3-Al2O3 coating for SiC-coated carbon/carbon composites , 2017 .

[6]  D. Kuznetsov,et al.  Wear behaviour of wear-resistant adaptive nano-multilayered Ti-Al-Mo-N coatings , 2016 .

[7]  Lin Songsheng,et al.  Magnetron Sputtering Preparation and Properties of SiC/MoSi2 Oxidation Protective Coating for Carbon/Carbon Composites Prepared , 2016 .

[8]  Yi Wang,et al.  Microstructure and Wear Resistance of Plasma-Sprayed Molybdenum Coating Reinforced by MoSi2 Particles , 2016, Journal of Thermal Spray Technology.

[9]  Hejun Li,et al.  Effect of filler on the oxidation protective ability of MoSi2 coating for Mo substrate by halide activated pack cementation , 2016 .

[10]  H. Fukuyama,et al.  Densities of Fe–Ni melts and thermodynamic correlations , 2016, Journal of Materials Science.

[11]  Hongmei Xu,et al.  Effect of Nano-ZrO2 on the Microstructure and High Temperature Tribological Properties of MoSi2 Coating , 2013, Journal of Thermal Spray Technology.

[12]  H. Pan,et al.  Fabrication and mechanical properties of SiCw/MoSi2–SiC composites by liquid Si infiltration of pyrolyzed rice husk preforms with Mo additions , 2012 .

[13]  Chengguo Wang,et al.  Fabrication of a SiC/Si/MoSi2 multi-coating on graphite materials by a two-step technique , 2012 .

[14]  Xuebin Zheng,et al.  A comparative study of MoSi2 coatings manufactured by atmospheric and vacuum plasma spray processes , 2011 .

[15]  S. Suib,et al.  Formation of MoSi2–SiO2 coatings on molybdenum substrates by CVD/MOCVD , 2006 .

[16]  D. Jeulin,et al.  Study of the Porosity in Plasma-Sprayed Alumina through an Innovative Three-Dimensional Simulation of the Coating Buildup , 2004, Thermal Spray 2004: Proceedings from the International Thermal Spray Conference.

[17]  W. Fang,et al.  Effect of Mg addition on the microstructure and mechanical properties of MoSi2 alloys , 2002 .

[18]  J. Hawk,et al.  Abrasive wear behavior of a brittle matrix (MoSi2) composite reinforced with a ductile phase (Nb) , 2001 .

[19]  B. Wielage,et al.  High temperature oxidation behavior of HVOF-sprayed unreinforced and reinforced molybdenum disilicide powders , 2001 .

[20]  Hideaki Takahashi,et al.  Low temperature oxidation of fully dense and porous MoSi2 , 1999 .

[21]  J. Hawk,et al.  Abrasive wear of Si3N4MoSi2 composites , 1997 .

[22]  J. Hawk,et al.  Abrasive wear of Si3N4-MoSi2 composites , 1997 .

[23]  J. Hawk,et al.  A comparative study of the abrasive wear behavior of MoSi2 , 1995 .

[24]  A. Vasudévan,et al.  A comparative overview of molybdenum disilicide composites , 1992 .

[25]  P. J. Meschter.  Low-temperature oxidation of molybdenum disilicide , 1992 .