Numerical modeling and simulation of wheel radial fatigue tests

Abstract A computational methodology is proposed for fatigue damage assessment of metallic automotive components and its application is presented with numerical simulations of wheel radial fatigue tests. The technique is based on the local strain approach in conjunction with linear elastic FE stress analyses. The stress–strain response at a material point is computed with a cyclic plasticity model coupled with a notch stress–strain approximation scheme. Critical plane damage parameters are used in the characterization of fatigue damage under multiaxial loading conditions. All computational modules are implemented into a software tool and used in the simulation of radial fatigue tests of a disk-type truck wheel. In numerical models, the wheel rotation is included with a nonproportional cyclic loading history, and dynamic effects due to wheel–tire interaction are neglected. The fatigue lives and potential crack locations are predicted using effective strain, Smith–Watson–Topper and Fatemi–Socie parameters using computed stress–strain histories. Three-different test conditions are simulated, and both number of test cycles and crack initiation sites are estimated. Comparisons with the actual tests proved the applicability of the proposed approach.

[1]  F. Ellyin.  Fatigue Damage, Crack Growth and Life Prediction , 1996 .

[2]  F. A. Conle,et al.  Multiaxial Stress-Strain Modeling and Fatigue Life Prediction of SAE Axle Shafts , 1993 .

[3]  K. N. Smith.  A Stress-Strain Function for the Fatigue of Metals , 1970 .

[4]  J. Chaboche.  Constitutive equations for cyclic plasticity and cyclic viscoplasticity , 1989 .

[5]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[6]  C.-C. Chu,et al.  Multiaxial fatigue life prediction method in the ground vehicle industry , 1997 .

[7]  Mehmet Firat,et al.  Analytical durability modeling and evaluation¿complementary techniques for physical testing of automotive components , 2004 .

[8]  David L. McDowell,et al.  Advances in Multiaxial Fatigue , 1993 .

[9]  D. McDowell,et al.  Multiaxial Nonproportional Cyclic Deformation , 1982 .

[10]  D. Socie.  Critical Plane Approaches for Multiaxial Fatigue Damage Assessment , 1993 .

[11]  M. Barkey,et al.  A strain space nonlinear kinematic hardening/softening plasticity model , 1999 .

[12]  Mehmet Firat,et al.  Numerical analysis of wheel cornering fatigue tests , 2001 .

[13]  R. Peterson,et al.  Stress Concentration Factors , 1974 .

[14]  Richard C. Rice,et al.  SAE fatigue design handbook , 1997 .

[15]  Mark E. Barkey,et al.  Calculation of notch strains under multiaxial nominal loading , 1993 .

[16]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[17]  Soon-Bok Lee,et al.  A critical review on multiaxial fatigue assessments of metals , 1996 .

[18]  J. Chaboche.  Time-independent constitutive theories for cyclic plasticity , 1986 .

[19]  Drew V. Nelson,et al.  Advances in multiaxial fatigue life prediction for components with stress concentrations , 1997 .

[20]  Chao Yu Hung,et al.  Fatigue life estimation under multiaxial loadings , 1999 .