The oxidation behaviors of TiB1.73, Al0.59Ti0.41N, and TiB1.73/Al0.59Ti0.41N coatings deposited by high-power impulse magnetron sputtering method
暂无分享,去创建一个
Liying Wu | Ji-fei Zhu | Lianchang Qiu | Shan He | Huixin Liu | Kai Li | Yong Du | Fangfang Zeng
[1] I. Petrov,et al. Oxidation Kinetics of Overstoichiometric TiB2 Thin Films Grown by DC Magnetron Sputtering , 2022, Corrosion Science.
[2] A. Pukasiewicz,et al. Evaluation of high temperature corrosion resistance of CrN, AlCrN, and TiAlN arc evaporation PVD coatings deposited on Waspaloy , 2022, Surface and Coatings Technology.
[3] X. Ouyang,et al. Microstructure, mechanical and tribological properties of multilayer TiAl/TiAlN coatings on Al alloys by FCVA technology , 2021, Ceramics International.
[4] I. Petrov,et al. Improved oxidation properties from a reduced B content in sputter-deposited TiBx thin films , 2021 .
[5] S. Veldhuis,et al. Investigation of the Wear Performance of TiB2 Coated Cutting Tools during the Machining of Ti6Al4V Alloy , 2021, Materials.
[6] M. Chu,et al. Effect of annealing on the microstructure and mechanical properties of Ti0.17Al0.83N coating prepared by low pressure chemical vapor deposition , 2021 .
[7] C. Mitterer,et al. Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing , 2020 .
[8] I. Petrov,et al. Improving the high-temperature oxidation resistance of TiB2 thin films by alloying with Al , 2020, Acta Materialia.
[9] Zhanqiang Liu,et al. Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage , 2020 .
[10] J. Battaglia,et al. Microstructure and materials properties of understoichiometric TiBx thin films grown by HiPIMS , 2020, Surface and Coatings Technology.
[11] Xin Cao,et al. Sand erosion resistance improvement and damage mechanism of TiAlN coating via the bias-graded voltage in FCVA deposition , 2019, Surface and Coatings Technology.
[12] C. Colominas,et al. Evaluation of DC-MS and HiPIMS TiB2 and TaN coatings as diffusion barriers against molten aluminum: An insight into the wetting mechanism , 2019, Surface and Coatings Technology.
[13] J. Dai,et al. Microstructure and wear properties of self-lubricating TiB2-TiC N ceramic coatings on Ti-6Al-4V alloy fabricated by laser surface alloying , 2019, Surface and Coatings Technology.
[14] M. Döbeli,et al. Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering , 2019, Surface and Coatings Technology.
[15] Xiao-Li Qiu,et al. Structure, thermal stability and chromaticity investigation of TiB2 based high temperature solar selective absorbing coatings , 2019, Solar Energy.
[16] C. Mitterer,et al. Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings , 2018 .
[17] S. Sivarajan,et al. Cutting Characteristics of PVD Coated Cutting Tools , 2018 .
[18] Swarnima Singh,et al. Synthesis of TiB2 by extended arc thermal plasma , 2017 .
[19] O. Fabrichnaya,et al. Thermodynamic Description of the Ti-Al-O System Based on Experimental Data , 2017 .
[20] L. Näslund,et al. Influence of pulse frequency and bias on microstructure and mechanical properties of TiB2 coatings deposited by high power impulse magnetron sputtering , 2016 .
[21] R. A. Andrievskii,et al. Oxidation behavior of TiB2 micro- and nanoparticles , 2016, Inorganic Materials.
[22] R. Schmid-Fetzer,et al. Thermodynamic description of the Ti–O system , 2015 .
[23] M. Burghammer,et al. Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD , 2014 .
[24] F. Richard,et al. Microstructural and elasto-plastic material parameters identification by inverse finite elements method of Ti(1 − x)AlxN (0 < x < 1) sputtered thin films from Berkovich nano-indentation experiments , 2014 .
[25] J. Schneider,et al. Temporal evolution of oxygen chemisorption on TiAlN , 2014 .
[26] Yin-Yu Chang,et al. Mechanical properties and impact resistance of multilayered TiAlN/ZrN coatings , 2013 .
[27] L. Dong,et al. The effect of annealing on hardness, residual stress, and fracture resistance determined by modulation ratios of TiB2/TiAlN multilayers , 2013 .
[28] R. P. Martinho,et al. Mechanical and tribological characterization of TiB2 thin films. , 2012, Journal of nanoscience and nanotechnology.
[29] Yong Du,et al. Thermal stability and oxidation resistance of Ti–Al–N coatings , 2012, Surface & coatings technology.
[30] T. Chassé,et al. Characterization and oxidation behavior of MTCVD Ti–B–N coatings , 2011 .
[31] S. Logothetidis,et al. Excess of boron in TiB2 superhard thin films: a combined experimental and ab initio study , 2011 .
[32] H. Barshilia,et al. Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering , 2011 .
[33] T. Chassé,et al. Raman spectroscopy investigations of TiBxCyNz coatings deposited by low pressure chemical vapor deposition , 2010 .
[34] Yong Du,et al. Compositional and structural evolution of sputtered Ti-Al-N , 2009 .
[35] B. Basu,et al. Microstructural characterization and isothermal oxidation behavior of hot-pressed TiB2–10 wt.% TiSi2 composite , 2009 .
[36] C. Mitterer,et al. On the effect of Ta on improved oxidation resistance of Ti–Al–Ta–N coatings , 2009 .
[37] M. Herrmann,et al. Novel aluminum-rich Ti1 − xAlxN coatings by LPCVD , 2008 .
[38] Yong Du,et al. The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts , 2008 .
[39] Ulrike Hecht,et al. The Al–B–Nb–Ti system: I. Re-assessment of the constituent binary systems B–Nb and B–Ti on the basis of new experimental data , 2008 .
[40] Mark M. Opeka,et al. A Model for the Oxidation of ZrB2, HfB2 and TiB2 (Postprint) , 2007 .
[41] R. Heimann,et al. Induction plasma-sprayed photocatalytically active titania coatings and their characterisation by micro-Raman spectroscopy , 2006 .
[42] C. Mitterer,et al. Multifunctional multi-component PVD coatings for cutting tools , 2005 .
[43] C. Mitterer,et al. Self-organized nanocolumnar structure in superhard TiB2 thin films , 2005 .
[44] Yaogen Shen,et al. Hardening mechanisms of nanocrystalline Ti–Al–N solid solution films , 2004 .
[45] A. K. Tyagi,et al. Raman spectroscopic and photoluminescence investigations on laser surface modified α-Al2O3 coatings , 2003 .
[46] M. Larsson,et al. Low stress TiB2 coatings with improved tribological properties , 2001 .
[47] R. Munro. Material Properties of Titanium Diboride , 2000, Journal of research of the National Institute of Standards and Technology.
[48] J. Yarwood,et al. Raman microscopic studies of PVD hard coatings , 1999 .
[49] Christian Mitterer,et al. Borides in Thin Film Technology , 1997 .
[50] Paul Grange,et al. Characterization of the nitridation process of boric acid , 1995 .
[51] P. Hagenmuller,et al. Structure and physical features of the rare-earth borides , 1985 .