A Bending Pneumatic Rubber Actuator Realizing Soft-bodied Manta Swimming Robot

This paper shows a new design and prototyping method for a bending pneumatic rubber actuator and its application to a soft-bodied manta swimming robot. The design is based on optimal design using non-linear finite element method, in which geometrical and material non-linearity are considered and fabrication process is based on a rapid and efficient prototyping system using a CAD/CAM based rubber molding process. In this paper, the characteristics of several possible actuators are analyzed and evaluated to lead to an optimal actuator design. The actuator works very well with smooth and soft motion. The manta swimming robot in which the developed actuators are embedded is also designed based on non-linear finite element method. The developed manta swimming robot is made only of rubber and it swims in water smoothly as if it was a living fish. The experimental results of the manta robot motion show that good agreement with those of analytical results.

[1]  Toshio Fukuda,et al.  Rubber gas actuator driven by hydrogen storage alloy for in-pipe inspection mobile robot with flexible structure , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[2]  H. Tanaka,et al.  Applying a flexible microactuator to robotic mechanisms , 1992, IEEE Control Systems.

[3]  Koichi Suzumori,et al.  Micro-Walking Robot Driven by Flexible Microactuator , 1993, J. Robotics Mechatronics.

[4]  Koichi Suzumori,et al.  Applying Flexible Microactuators to Pipeline Inspection Robots , 1993, Robotics, Mechatronics and Manufacturing Systems.

[5]  Koichi SUZUMORI,et al.  A novel pneumatic rubber actuator for mobile robot bases , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[6]  Koichi Suzumori,et al.  Fiberless flexible microactuator designed by finite-element method , 1997 .

[7]  Koichi Suzumori,et al.  A direct-drive pneumatic stepping motor for robots: designs for pipe-inspection microrobots and for human-care robots , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[8]  Kok-Meng Lee,et al.  Compliant grasping force modeling for handling of live objects , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[9]  Shinichi Hirai,et al.  Prototyping pneumatic group actuators composed of multiple single-motion elastic tubes , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[10]  Daisuke Sasaki,et al.  Development of Medical Care Assist Bed using Pneumatic Planar Soft Actuator , 2002, J. Robotics Mechatronics.

[11]  M Takaiwa,et al.  Development of Active Support Sprint driven by Pneumatic Soft Actuator , 2004 .

[12]  Daisuke Sasaki,et al.  Development of Active Support Splint driven by Pneumatic Soft Actuator (ASSIST) , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[13]  Koichi Suzumori,et al.  Flexible and functional pectoral fin actuator for underwater robots , 2005 .

[14]  Koichi Suzumori,et al.  New pneumatic rubber actuators to assist colonoscope insertion , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[15]  Koichi Suzumori,et al.  Elastic Pectoral Fin Actuators for Biomimetic Underwater Vehicle , 2007 .

[16]  K. Suzumori,et al.  Elastic Pectoral Fin Actuators for Biomimetic Underwater Vehicles , 2008 .