Effect of temperature gradient on the ablation and flexural behavior of C/C-ZrC composites

[1]  D. Ni,et al.  Difference evaluation on ablation behaviors of ZrC-based and ZrB2-based UHTCs coatings , 2021 .

[2]  M. Galetz,et al.  Oxidation behaviour and related microstructural changes of two β0–phase containing TiAl alloys between 600 °C and 900 °C , 2021 .

[3]  Yang Li,et al.  Effects of h-BN particles on the structure, oxidation behaviour, and kinetics of C/C composites fabricated via CVI , 2021 .

[4]  Hejun Li,et al.  Effect of PyC interface phase on the cyclic ablation resistance and flexural properties of two-dimensional Cf/HfC composites , 2021 .

[5]  Hejun Li,et al.  An oxidation and ablation protective WSi2-HfB2-SiC coating for SiC coated C/C composites at 1973 K and above , 2020 .

[6]  S. Dong,et al.  Effects of preform pore structure on infiltration kinetics and microstructure evolution of RMI-derived Cf/ZrC-ZrB2-SiC composite , 2020 .

[7]  P. Xiao,et al.  Oxidation/ablation behaviors of hafnium carbide-silicon carbonitride systems at 1500 and 2500 C , 2020 .

[8]  Hejun Li,et al.  Ablation behaviour and mechanical property of the B-modified SiC/HfC-SiC composites in cyclic ablation environment , 2020 .

[9]  Q. Fu,et al.  A novel Hf Si O wire drawing phenomenon after ablation of SiCnws/HfC SiC coating on C/C composites , 2020 .

[10]  Wei Sun,et al.  Ultra-high-temperature ablation behavior of SiC–ZrC–TiC modified carbon/carbon composites fabricated via reactive melt infiltration , 2020 .

[11]  Hui‐Ming Cheng,et al.  Mechanical, oxidation and ablation properties of C/(C-SiC)CVI-(ZrC-SiC)PIP composites , 2020 .

[12]  Yang Li,et al.  Effect of the Al2O3 additive on the high temperature ablation behavior of the ZrC–ZrO2 coating for SiC-coated carbon/carbon composites , 2019 .

[13]  Yulei Zhang,et al.  Effect of HfC-SiC transition layer on the ablation resistance of SiC/HfC-SiC/HfC multi-layer coating for C/C composites , 2019, Vacuum.

[14]  Y. Kubota,et al.  New thermal protection system using high-temperature carbon fibre-reinforced plastic sandwich panel , 2019, Acta Astronautica.

[15]  Hejun Li,et al.  Effects of precursor feeding rate on the microstructure and ablation resistance of gradient C/C ZrC SiC composites prepared by chemical liquid-vapor deposition , 2019, Vacuum.

[16]  Yan Jiang,et al.  Oxidation and ablation protection of double layer HfB2-SiC-Si/SiC-Si coating for graphite materials , 2019, Journal of Alloys and Compounds.

[17]  J. Binner,et al.  Materials characterisation and mechanical properties of Cf-UHTC powder composites , 2019, Journal of the European Ceramic Society.

[18]  Hui‐Ming Cheng,et al.  Long-term oxidation behaviors of C/SiC composites with a SiC/UHTC/SiC three-layer coating in a wide temperature range , 2019, Corrosion Science.

[19]  Wei Li,et al.  Mechanical properties and ablation behavior of C/C-ZrC and C/C-ZrC-SiC composites prepared by precursor infiltration and pyrolysis combined with chemical vapor infiltration , 2018, Ceramics International.

[20]  Wei Li,et al.  Enhanced anti-ablation performance of carbon/carbon composites modified with ZrC-SiC , 2018, Vacuum.

[21]  Hejun Li,et al.  Influence of CLVD thermal gradient on the deposition behavior, microstructure and properties of C/C-ZrC composites , 2018, Ceramics International.

[22]  William E Lee,et al.  High temperature creep of 20 vol%. SiC-HfB2 UHTCs up to 2000 °C and the effect of La2O3 addition , 2018 .

[23]  S. Dong,et al.  Ablation behavior of C/C-ZrC and C/SiC-ZrC composites fabricated by a joint process of slurry impregnation and chemical vapor infiltration , 2017 .

[24]  Hejun Li,et al.  Effect of ZrC particle size on the ablation resistance of C/C-ZrC-SiC composites , 2017 .

[25]  Q. Fu,et al.  Ablation behavior of sharp-shape C/C-SiC-ZrB2 composites under oxyacetylene flame , 2017 .

[26]  Yulei Zhang,et al.  UHTC coating reinforced by HfC nanowires against ablation for C/C composites , 2017 .

[27]  Hejun Li,et al.  Preparation of co-deposited C/C-ZrC composites by CLVD process and its properties , 2016 .

[28]  J. Ferreira,et al.  Carbothermal synthesis of micro-scale spherical AlN granules with CaF2 additive , 2016 .

[29]  Bala Vaidhyanathan,et al.  UHTC composites for hypersonic applications , 2014 .

[30]  Hejun Li,et al.  Influence of preparation temperature on the oxidation resistance and mechanical properties of C/SiC coated C/C composites , 2014 .

[31]  Hejun Li,et al.  Oxidation and Mechanical Properties of SiC/SiC–MoSi2–ZrB2 Coating for Carbon/Carbon Composites , 2014 .

[32]  Hejun Li,et al.  Effect of reaction melt infiltration temperature on the ablation properties of 2D C/C–SiC–ZrC composites , 2012 .

[33]  Wangping Wu,et al.  Microstructural characterization on ZrC doped carbon/carbon composites , 2012 .

[34]  William E Lee,et al.  Reactive infiltration processing (RIP) of ultra high temperature ceramics (UHTC) into porous C/C composite tubes , 2011 .

[35]  Li Kezhi,et al.  Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites , 2010 .

[36]  Wei Sun,et al.  ZrC ablation protective coating for carbon/carbon composites , 2009 .

[37]  A. Bellosi,et al.  Processing and properties of ultra-high temperature ceramics for space applications , 2008 .

[38]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[39]  E. Opila,et al.  UHTCs: Ultra-High Temperature Ceramic Materials for Extreme Environment Applications , 2007 .

[40]  Mark M. Opeka,et al.  Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and zirconium Compounds , 1999 .

[41]  E. Fitzer.  The future of carbon-carbon composites , 1987 .