Oxygen concentration measurement and control of lead-bismuth eutectic in a small, static experimental facility

ABSTRACT Oxygen measurement and control system is critical for minimizing corrosion in nuclear systems. Oxygen measurement and control tools use lead-bismuth eutectic (LBE) and pure lead as a coolant or as a spallation target. Oxygen can be supplied by either gas phase (H2O or O2) or solid phase (PbO dissolution); thus, oxygen control includes both gas phase and solid phase methods. This article focuses on oxygen concentration measurement and control of lead-bismuth eutectic in a small, static experimental facility. This facility was developed for oxygen sensor calibration and gas/solid phase control systems test programs. The oxygen sensor with Nano Cu/Cu2O closely the Nernstian behavior down to 195°C; the oxygen sensor measurement accuracy satisfied the requirements of subsequent experiments. The gas phase control system (verified according to different type of mass transfer, such as air, H2O, gas injection, and coverage) and the solid phase control system were very successful in small experimental devices. Accurate oxygen concentration control was achieved with both the gas and solid phase control systems.

[1]  Minoru Takahashi,et al.  Performance of solid electrolyte oxygen sensor with solid and liquid reference electrode for liquid metal , 2017 .

[2]  A. Aerts,et al.  Active oxygen control by a PbO mass exchanger in the liquid lead–bismuth eutectic loop: MEXICO , 2017 .

[3]  J. Deconinck,et al.  Temperature dependence of dissolution rate of a lead oxide mass exchanger in lead–bismuth eutectic , 2014 .

[4]  J. V. D. Bosch,et al.  Accuracy of potentiometric oxygen sensors with Bi/Bi2O3 reference electrode for use in liquid LBE , 2012 .

[5]  J. V. D. Bosch,et al.  Solid electrolytes for use in lead–bismuth eutectic cooled nuclear reactors , 2012 .

[6]  C. Schroer,et al.  Oxygen control systems and impurity purification in LBE: Learning from DEMETRA project , 2011 .

[7]  C. Schroer,et al.  Design and testing of electrochemical oxygen sensors for service in liquid lead alloys , 2011 .

[8]  Olaf Wedemeyer,et al.  Gas/liquid oxygen-transfer to flowing lead alloys , 2011 .

[9]  I. Hwang,et al.  Dissolved oxygen control and monitoring implementation in the liquid lead-bismuth eutectic loop : HELIOS , 2008 .

[10]  T. Song,et al.  Kinetics of Gas Phase Oxygen Control System and Oxygen Concentration Measurement in Liquid Pb and LBE , 2007 .

[11]  R. Hultgren.  Handbook on Lead-bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermal-hydraulics and Technologies , 2007 .

[12]  Minoru Takahashi,et al.  Study on control of oxygen concentration in lead–bismuth flow using lead oxide particles , 2006 .

[13]  R. Ganesan,et al.  Diffusivity, activity and solubility of oxygen in liquid lead and lead–bismuth eutectic alloy by electrochemical methods , 2006 .

[14]  J.-L. Courouau,et al.  Electrochemical oxygen sensors for on-line monitoring in lead–bismuth alloys: status of development , 2004 .

[15]  H. Muscher,et al.  Oxygen measurements in stagnant lead–bismuth eutectic using electrochemical sensors , 2004 .

[16]  P. N. Martynov,et al.  Heavy Liquid Metal Coolant – Lead–Bismuth and Lead – Technology , 2004 .

[17]  Alfons Weisenburger,et al.  Control of oxygen concentration in liquid lead and lead-bismuth , 2003 .

[18]  P. Trabuc,et al.  Impurities and oxygen control in lead alloys , 2002 .

[19]  H. Muscher,et al.  Development of oxygen meters for the use in lead–bismuth , 2001 .

[20]  J. U. Knebel,et al.  Kinetics of gas phase oxygen control system (OCS) for stagnant and flowing Pb–Bi Systems , 2001 .