A proposed model to predict thermal conductivity ratio of Al2O3/EG nanofluid by applying least squares support vector machine (LSSVM) and genetic algorithm as a connectionist approach
暂无分享,去创建一个
Mohammad Ali Ahmadi | Omid Mahian | Mohammad Hossein Ahmadi | Roghayeh Ghasempour | Mohammad Alhuyi Nazari | M. Ahmadi | O. Mahian | M. Nazari | M. Ahmadi | M. Ahmadi | R. Ghasempour
[1] Saeed Zeinali Heris,et al. Experimental Study of Heat Transfer of a Car Radiator with CuO/Ethylene Glycol-Water as a Coolant , 2014 .
[2] Luis Lugo,et al. Enhancement of thermal conductivity and volumetric behavior of FexOy nanofluids , 2011 .
[3] M. Esfahany,et al. Influence of orientation and roughness of heater surface on critical heat flux and pool boiling heat transfer coefficient of nanofluid , 2017 .
[4] Davood Toghraie,et al. Designing artificial neural network on thermal conductivity of Al2O3–water–EG (60–40 %) nanofluid using experimental data , 2016, Journal of Thermal Analysis and Calorimetry.
[5] N. Sidik,et al. Thermal conductivity and viscosity models of metallic oxides nanofluids , 2018 .
[6] Johan A. K. Suykens,et al. LS-SVMlab : a MATLAB / C toolbox for Least Squares Support Vector Machines , 2007 .
[7] Johan A. K. Suykens,et al. Multiclass least squares support vector machines , 1999, IJCNN'99. International Joint Conference on Neural Networks. Proceedings (Cat. No.99CH36339).
[8] Saeed Zeinali Heris,et al. Effects of Curvature Ratio and Coil Pitch Spacing on Heat Transfer Performance of Al2O3/Water Nanofluid Laminar Flow through Helical Coils , 2013 .
[9] M. H. Esfe,et al. Thermal conductivity and viscosity optimization of nanodiamond-Co3O4/EG (40:60) aqueous nanofluid using NSGA-II coupled with RSM , 2017 .
[10] Robello Samuel,et al. Formation and characterization of thermal and electrical properties of CuO and ZnO nanofluids in xanthan gum , 2014 .
[11] Wenhua Yu,et al. Review and Comparison of Nanofluid Thermal Conductivity and Heat Transfer Enhancements , 2008 .
[12] K. Wasewar,et al. Influence of CuO nanoparticles in enhancing the thermal conductivity of water and monoethylene glycol based nanofluids , 2012 .
[13] M. H. Esfe,et al. Estimation of thermal conductivity of ethylene glycol-based nanofluid with hybrid suspensions of SWCNT–Al2O3 nanoparticles by correlation and ANN methods using experimental data , 2017, Journal of Thermal Analysis and Calorimetry.
[14] Johan A. K. Suykens,et al. Training multilayer perceptron classifiers based on a modified support vector method , 1999, IEEE Trans. Neural Networks.
[15] Ehsan Mohseni Languri,et al. Effect of particle size and viscosity on thermal conductivity enhancement of graphene oxide nanofluid , 2016 .
[16] Saeed Zeinali Heris,et al. Improvement in Heat Transfer of a Two-Phased Closed Thermosyphon Using Silver-Decorated MWCNT/Water , 2014 .
[17] Michel Feidt,et al. Connectionist intelligent model estimates output power and torque of stirling engine , 2015 .
[18] Wei Jiang,et al. Monodisperse magnetite nanofluids: Synthesis, aggregation, and thermal conductivity , 2010 .
[19] Hamid Teimouri,et al. Predicting the effects of magnesium oxide nanoparticles and temperature on the thermal conductivity of water using artificial neural network and experimental data , 2017 .
[20] Mehdi Bahiraei,et al. Thermal Dispersion Model Compared with Euler-Lagrange Approach in Simulation of Convective Heat Transfer for Nanoparticle Suspensions , 2013 .
[21] Ali J. Chamkha,et al. Natural convection from a vertical permeable cone in a nanofluid saturated porous media for uniform heat and nanoparticles volume fraction fluxes , 2012 .
[22] Yanhui Yuan,et al. The effect of particle size on the thermal conductivity of alumina nanofluids , 2009 .
[23] M. Afrand,et al. Experimental evaluation, new correlation proposing and ANN modeling of thermal properties of EG based hybrid nanofluid containing ZnO-DWCNT nanoparticles for internal combustion engines applications , 2017 .
[24] Toghi Eshghi Amin,et al. Evaluation of Nanoparticle Shape Effect on a Nanofluid Based Flat-Plate Solar Collector Efficiency , 2015 .
[25] G. Peterson,et al. The effect of particle size on the effective thermal conductivity of Al2O3-water nanofluids , 2007 .
[26] M. Esfahany,et al. Experimental investigation of the effect of nanoparticle size on thermal conductivity of in-situ prepared silica–ethanol nanofluid , 2016 .
[27] M. Afrand,et al. Prediction of rheological behavior of SiO2-MWCNTs/10W40 hybrid nanolubricant by designing neural network , 2018, Journal of Thermal Analysis and Calorimetry.
[28] M. I. Pryazhnikov,et al. The experimental study of nanofluids boiling crisis on cylindrical heaters , 2017 .
[29] Mohammad Ali Ahmadi,et al. Prediction breakthrough time of water coning in the fractured reservoirs by implementing low parameter support vector machine approach , 2014 .
[30] Wei-Mon Yan,et al. Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al 2 O 3 nanoparticles , 2015 .
[31] Shahram Delfani,et al. Experimental investigation and modeling of thermal conductivity of CuO–water/EG nanofluid by FFBP-ANN and multiple regressions , 2017, Journal of Thermal Analysis and Calorimetry.
[32] Saeed Zeinali Heris,et al. Heat Transfer Performance of Milk Pasteurization Plate Heat Exchangers Using MWCNT/Water Nanofluid , 2015 .
[33] K. Movagharnejad,et al. A comparative study between LS-SVM method and semi empirical equations for modeling the solubility of different solutes in supercritical carbon dioxide , 2011 .
[34] Gang Chen,et al. Enhanced thermal conductivity and viscosity of copper nanoparticles in ethylene glycol nanofluid , 2008 .
[35] Saeid Abbasbandy,et al. Radiation effects on mixed convection about a cone embedded in a porous medium filled with a nanofluid , 2013 .
[36] K. Lindsay,et al. Marangoni convection in water-alumina nanofluids: Dependence on the nanoparticle size , 2018 .
[37] M. Hemmat Esfe,et al. Modeling of thermal conductivity of MWCNT-SiO2 (30:70%)/EG hybrid nanofluid, sensitivity analyzing and cost performance for industrial applications , 2018, Journal of Thermal Analysis and Calorimetry.
[38] M. Shafii,et al. Visualization and comparative investigations of pulsating ferro-fluid heat pipe , 2017 .
[39] D. Toghraie,et al. Developing a new correlation to estimate the thermal conductivity of MWCNT-CuO/water hybrid nanofluid via an experimental investigation , 2017, Journal of Thermal Analysis and Calorimetry.
[40] M. Firouzi,et al. The effects of temperature and volume fraction on the thermal conductivity of functionalized DWCNTs/ethylene glycol nanofluid , 2016, Journal of Thermal Analysis and Calorimetry.
[41] Tiju Thomas,et al. Comparison of experimental and calculated thermophysical properties of alumina/cupric oxide hybrid nanofluids , 2017 .
[42] K. R. Nemade,et al. A comprehensive study of effect of concentration, particle size and particle shape on thermal conductivity of titania/water based nanofluid , 2017 .
[43] Johan A. K. Suykens,et al. Least Squares Support Vector Machines , 2002 .
[44] Mohammad Ali Ahmadi,et al. Connectionist approach estimates gas–oil relative permeability in petroleum reservoirs: Application to reservoir simulation , 2015 .
[45] Johan A. K. Suykens,et al. Least squares support vector machines for classification and nonlinear modelling , 2000 .
[46] Xing Zhang,et al. Effective thermal conductivity and thermal diffusivity of nanofluids containing spherical and cylindrical nanoparticles , 2006 .
[47] M. Hemmat Esfe,et al. ANN modeling, cost performance and sensitivity analyzing of thermal conductivity of DWCNT–SiO2/EG hybrid nanofluid for higher heat transfer , 2018, Journal of Thermal Analysis and Calorimetry.
[48] M. Tawfik. Experimental studies of nanofluid thermal conductivity enhancement and applications: A review , 2017 .
[49] A. Bahadori,et al. A rigorous model to predict the amount of Dissolved Calcium Carbonate Concentration throughout oil field brines: Side effect of pressure and temperature , 2015 .
[50] Chi-Man Vong,et al. Prediction of automotive engine power and torque using least squares support vector machines and Bayesian inference , 2006, Eng. Appl. Artif. Intell..
[51] A. Bahadori,et al. A LSSVM approach for determining well placement and conning phenomena in horizontal wells , 2015 .
[52] S. Esfandeh,et al. Experimental evaluation, sensitivity analyzation and ANN modeling of thermal conductivity of ZnO-MWCNT/EG-water hybrid nanofluid for engineering applications , 2017 .
[53] M. Afrand,et al. Measurement of thermal conductivity of ZnO–TiO2/EG hybrid nanofluid , 2016, Journal of Thermal Analysis and Calorimetry.
[54] Liu Yang,et al. Recent developments on viscosity and thermal conductivity of nanofluids , 2017 .
[55] Ali J. Chamkha,et al. Thermal conductivity variation on natural convection flow of water–alumina nanofluid in an annulus , 2012 .
[56] Mohammad Hossein Ahmadi,et al. Experimental investigation of graphene oxide nanofluid on heat transfer enhancement of pulsating heat pipe , 2018 .
[57] Xiande Fang,et al. Heat transfer and critical heat flux of nanofluid boiling: A comprehensive review , 2016 .
[58] Numerical modeling of magnetohydrodynamic CuO—Water transportation inside a porous cavity considering shape factor effect , 2017 .
[59] Hossein Rostamian,et al. Rheological behavior characteristics of ZrO 2 -MWCNT/10w40 hybrid nano-lubricant affected by temperature, concentration, and shear rate: An experimental study and a neural network simulating , 2017, Physica E: Low-dimensional Systems and Nanostructures.
[60] C. T. Nguyen,et al. New temperature dependent thermal conductivity data for water-based nanofluids , 2009 .
[61] M. Afrand,et al. An experimental study on deposited surfaces due to nanofluid pool boiling: comparison between rough and smooth surfaces , 2017 .
[62] P. K. Das,et al. Effect of Particle Size on Thermal Conductivity of Nanofluid , 2008 .
[63] Mohammad Ali Ahmadi,et al. Development of robust model to estimate gas–oil interfacial tension using least square support vector machine: Experimental and modeling study , 2016 .
[64] Davood Toghraie,et al. Designing an artificial neural network to predict dynamic viscosity of aqueous nanofluid of TiO2 using experimental data , 2016 .
[65] Tae-Keun Hong,et al. Study of the enhanced thermal conductivity of Fe nanofluids , 2005 .
[66] Ali J. Chamkha,et al. An analysis on free convection flow, heat transfer and entropy generation in an odd-shaped cavity filled with nanofluid , 2014 .
[67] Mohammad Ali Ahmadi,et al. Toward reliable model for prediction Drilling Fluid Density at wellbore conditions: A LSSVM model , 2016, Neurocomputing.
[68] A. T. Baheta,et al. Experimental measurements of thermal conductivity and viscosity of ethylene glycol-based hybrid nanofluid with TiO2-CuO/C inclusions , 2017 .
[69] N. Agrawal,et al. Sensitivity of thermal conductivity for Al2O3 nanofluids , 2017 .
[70] Shaohua Wu,et al. Molecular dynamics simulation on flow behaviors of nanofluids confined in nanochannel , 2015 .
[71] S. Saedodin,et al. Investigation of rheological behavior of MWCNT (COOH-functionalized)/MgO - Engine oil hybrid nanofluids and modelling the results with artificial neural networks , 2017 .
[72] J. Suykens,et al. Recurrent least squares support vector machines , 2000 .
[73] Johan A. K. Suykens,et al. Least Squares Support Vector Machines , 2002 .
[74] A. Kasaeian,et al. Numerical investigation of the nanofluid effects on the heat extraction process of solar ponds in the transient step , 2017 .
[75] Patricia E. Gharagozloo,et al. Aggregate fractal dimensions and thermal conduction in nanofluids , 2010 .
[76] R. Aghayari,et al. Nanofluid Thermal Conductivity Prediction Model Based on Artificial Neural Network , 2016 .