Mechanical parameter estimation of permanent magnet synchronous machines with aiding from estimation of rotor PM flux linkage

This paper proposes a combined parameter estimation for permanent magnet synchronous machines (PMSMs), by which the rotor permanent magnet (PM) flux linkage and mechanical parameters such as the combined moment of inertia and viscous friction coefficient are estimated without the aid from nominal machine parameter values. The proposed estimation of rotor PM flux linkage is based on the addition of position offsets and does not need the information of other machine parameters or injection of currents. With the aid from estimated rotor PM flux linkage, the electromagnetic torque can be consequently calculated for the estimation of mechanical parameters at no load condition and a two-step method is employed to achieve a higher ratio of signal to noise. This combined parameter estimation is finally validated on a surface-mounted PMSM (SPMSM) and an interior PMSM (IPMSM), respectively, and shows good accuracy in tracking the variation of combined moment of inertia.

[1]  David Reigosa,et al.  Magnet Temperature Estimation in Surface PM Machines Using High-Frequency Signal Injection , 2010 .

[2]  Ion Boldea,et al.  Complete Parameter Identification of Large Induction Machines From No-Load Acceleration–Deceleration Tests , 2007, IEEE Transactions on Industrial Electronics.

[3]  Jing Zhang,et al.  Influence of Nonideal Voltage Measurement on Parameter Estimation in Permanent-Magnet Synchronous Machines , 2012, IEEE Transactions on Industrial Electronics.

[4]  Kan Liu,et al.  Parameter Estimation for Condition Monitoring of PMSM Stator Winding and Rotor Permanent Magnets , 2013, IEEE Transactions on Industrial Electronics.

[5]  Shaowei Wang,et al.  Estimations of load parameters for PMSM by MRAS , 2011, 2011 International Conference on Electrical and Control Engineering.

[6]  Iqbal Husain,et al.  Online Parameter Estimation and Adaptive Control of Permanent-Magnet Synchronous Machines , 2010, IEEE Transactions on Industrial Electronics.

[7]  F. Andoh,et al.  Moment of Inertia Identification Using the Time Average of the Product of Torque Reference Input and Motor Position , 2007, IEEE Transactions on Power Electronics.

[8]  Shinji Doki,et al.  Sensorless control of permanent-magnet synchronous motors using online parameter identification based on system identification theory , 2006, IEEE Transactions on Industrial Electronics.

[9]  Bernard Widrow,et al.  30 years of adaptive neural networks: perceptron, Madaline, and backpropagation , 1990, Proc. IEEE.

[10]  Y. Takeda,et al.  Mechanical Sensorless Drives of IPMSM With Online Parameter Identification , 2005, IEEE Transactions on Industry Applications.

[11]  Jin-Hyun Choi,et al.  Inertia identification algorithm for high-performance speed control of electric motors , 2006 .

[12]  Kan Liu,et al.  Online Estimation of the Rotor Flux Linkage and Voltage-Source Inverter Nonlinearity in Permanent Magnet Synchronous Machine Drives , 2014, IEEE Transactions on Power Electronics.

[13]  B. Nahid-Mobarakeh,et al.  Online Identification of PMSM Parameters: Parameter Identifiability and Estimator Comparative Study , 2011, IEEE Transactions on Industry Applications.

[14]  Jing Zhang,et al.  Online Multiparameter Estimation of Nonsalient-Pole PM Synchronous Machines With Temperature Variation Tracking , 2011, IEEE Transactions on Industrial Electronics.

[15]  Rong-Ching Wu,et al.  Parameter Identification of Induction Machine With a Starting No-Load Low-Voltage Test , 2012, IEEE Transactions on Industrial Electronics.

[16]  Xinghuo Yu,et al.  High-Order Terminal Sliding-Mode Observer for Parameter Estimation of a Permanent-Magnet Synchronous Motor , 2013, IEEE Transactions on Industrial Electronics.

[17]  In-Joong Ha,et al.  An online identification method for both stator resistance and back-EMF coefficient of PMSMs without rotational transducers , 2004, IEEE Trans. Ind. Electron..

[18]  Hyun-Soo Kim,et al.  Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty , 2006, IEEE Transactions on Control Systems Technology.

[19]  Faa-Jeng Lin,et al.  A high-performance induction motor drive with on-line rotor time-constant estimation , 1997 .

[20]  K. Uezato,et al.  Parameter measurement for PMSM using adaptive identification , 2002, Industrial Electronics, 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium on.

[21]  T. G. Habetler,et al.  A remote and sensorless thermal protection scheme for small line-connected ac machines , 2003 .

[22]  Shihua Li,et al.  Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia , 2009, IEEE Transactions on Industrial Electronics.

[23]  Fernando Briz,et al.  Magnet temperature estimation in surface PM machines using high frequency signal injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[24]  Zhejie Liu,et al.  Determination of machine parameters for internal permanent magnet synchronous motors , 2004 .