Solid-state phase transformations involving solute partitioning: modeling and measuring on the level of individual grains

A simplified grain growth model is presented for the transition from non-overlapping to overlapping diffusion fields of growing neighboring grains during partitioning solid-state transformations in polycrystalline materials. The model is based on unique observations on the austenite decomposition into ferrite and pearlite in medium-carbon steel with the three-dimensional X-ray diffraction microscope. The model explains three types of observed pro-eutectoid ferrite grain growth and austenite grain decomposition, and the indirectly observed carbon exchange between decomposing austenite grains. A direct comparison of the model and the experiment at the level of individual grains shows that the growth of ferrite grains is strongly related to the local carbon concentration and the local density of nuclei. Unusual observations of a non-stationary austenite grain size prior to the transformation, and oscillatory ferrite growth are reported.

[1]  S. Zwaag,et al.  The effect of geometrical assumptions in modeling solid-state transformation kinetics , 1998 .

[2]  J. Christian,et al.  The theory of transformations in metals and alloys , 2003 .

[3]  Clarence Zener,et al.  Interference of Growing Spherical Precipitate Particles , 1950 .

[4]  K. Lonsdale.  X-Ray Diffraction , 1971, Nature.

[5]  E. Lauridsen,et al.  Kinetics of individual grains during recrystallization , 2000 .

[6]  H. Poulsen,et al.  In Situ Measurement of Grain Rotation During Deformation of Polycrystals , 2001, Science.

[7]  Daniel Crespo,et al.  Microstructural evaluation of primary crystallization with diffusion-controlled grain growth , 1997 .

[8]  Jilt Sietsma,et al.  In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel , 2003 .

[9]  M. Militzer,et al.  Ferrite nucleation and growth during continuous cooling , 1996 .

[10]  C. Zener.  Theory of Growth of Spherical Precipitates from Solid Solution , 1949 .

[11]  S. W. Thompson,et al.  On the early stages of pearlite formation in hypoeutectoid steels , 1988 .

[12]  H. Bhadeshia,et al.  Modelling of isothermal ferrite formation using an analytical treatment of soft impingement in 0.37C-1.45Mn-0.11V microalloyed steel , 1998 .

[13]  J. Ågren.  A revised expression for the diffusivity of carbon in binary FeC austenite , 1986 .

[14]  S. Zwaag,et al.  The Lattice-Parameters of Austenite and Ferrite in Fe-C Alloys as Functions of Carbon Concentration and Temperature , 1993 .

[15]  J. Kirkaldy,et al.  Partition of manganese during the proeutectoid ferrite transformation in steel , 1972 .

[16]  S. Zwaag,et al.  Grain Nucleation and Growth During Phase Transformations , 2002, Science.

[17]  R. Vandermeer.  Modeling diffusional growth during austenite decomposition to ferrite in polycrystalline FeC alloys , 1990 .

[18]  D. Juul Jensen,et al.  Electronic Reprint Applied Crystallography Three-dimensional Maps of Grain Boundaries and the Stress State of Individual Grains in Polycrystals and Powders Applied Crystallography Three-dimensional Maps of Grain Boundaries and the Stress State of Individual Grains in Polycrystals and Powders , 2001 .

[19]  F. Sommer,et al.  Solid state phase transformation kinetics: a modular transformation model , 2002 .

[20]  S. Zwaag,et al.  A three-dimensional model for the development of the microstructure in steel during slow cooling , 2000 .

[21]  S. E. Offerman,et al.  Ferrite/pearlite band formation in hot rolled medium carbon steel , 2002 .