Long-term thermal stability and failure mechanisms of Pyromark 2500 for high-temperature solar thermal receivers

[1]  Wujun Wang,et al.  A comprehensive analysis of the optical and thermal performance of solar absorber coatings under concentrated flux conditions , 2022, Solar Energy.

[2]  I. Jerman,et al.  Review of the spectrally selective (CSP) absorber coatings, suitable for use in SHIP , 2022, Solar Energy Materials and Solar Cells.

[3]  F. Manzano-Agugliaro,et al.  Laboratory intercomparison of solar absorptance and thermal emittance measurements at room temperature , 2022, Solar Energy Materials and Solar Cells.

[4]  J. Coventry,et al.  Highly efficient and durable solar thermal energy harvesting via scalable hierarchical coatings inspired by stony corals , 2022, Energy & Environmental Science.

[5]  J. Coventry,et al.  Degradation mechanisms and non-linear thermal cycling effects in a high-temperature light-absorber coating , 2020 .

[6]  Vincent M. Wheeler,et al.  Progress in heat transfer research for high-temperature solar thermal applications , 2020 .

[7]  K. Adachi,et al.  Residual Stress Change in Thermal Barrier Coating Due to Thermal Exposure Evaluated by Curvature Method , 2020, Journal of Thermal Spray Technology.

[8]  Ehsan Abbasi-Shavazi,et al.  Experimental correlation of natural convection losses from a scale-model solar cavity receiver with non-isothermal surface temperature distribution , 2020 .

[9]  Young-Ze Lee,et al.  Oxide Layer Rumpling Control Technology for High Efficiency of Eco-Friendly Combined-Cycle Power Generation System , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[10]  F. Ruiz-Zepeda,et al.  High-temperature “ion baseball” for enhancing concentrated solar power efficiency , 2019, Solar Energy Materials and Solar Cells.

[11]  M. Tello,et al.  Infrared emissivity of copper-alloyed spinel black coatings for concentrated solar power systems , 2019, Solar Energy Materials and Solar Cells.

[12]  Ridha Harzallah,et al.  Development of high performances solar absorber coatings , 2019, SOLARPACES 2018: International Conference on Concentrating Solar Power and Chemical Energy Systems.

[13]  A. Ambrosini,et al.  Influence of application parameters on stability of Pyromark® 2500 receiver coatings , 2019, SOLARPACES 2018: International Conference on Concentrating Solar Power and Chemical Energy Systems.

[14]  Renkun Chen,et al.  Optical properties and thermal stability of Cu spinel oxide nanoparticle solar absorber coatings , 2019, Solar Energy Materials and Solar Cells.

[15]  F. Ruiz-Zepeda,et al.  High-solar-absorptance CSP coating characterization and reliability testing with isothermal and cyclic loads for service-life prediction , 2019, Energy & Environmental Science.

[16]  A. Agüero,et al.  Accelerated aging of absorber coatings for CSP receivers under real high solar flux – Evolution of their optical properties , 2019, Solar Energy Materials and Solar Cells.

[17]  J. Moon,et al.  Copper-oxide spinel absorber coatings for high-temperature concentrated solar power systems , 2018, Solar Energy Materials and Solar Cells.

[18]  A. Ambrosini,et al.  Durability of solar absorber coatings and their cost-effectiveness , 2017 .

[19]  J. Coventry,et al.  Optical properties of Pyromark 2500 coatings of variable thicknesses on a range of materials for concentrating solar thermal applications , 2017 .

[20]  Wang Ji-ning,et al.  A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings , 2017 .

[21]  M. Gallas,et al.  Effect of the optical properties of the coating of a concentrated solar power central receiver on its thermal efficiency , 2017 .

[22]  Chunsheng Lu,et al.  Reliability assessment on interfacial failure of thermal barrier coatings , 2016 .

[23]  Tae Kyoung Kim,et al.  Copper-alloyed spinel black oxides and tandem-structured solar absorbing layers for high-temperature concentrating solar power systems , 2016 .

[24]  A. Ambrosini,et al.  Thermal Stability of Oxide-Based Solar Selective Coatings for CSP Central Receivers , 2015 .

[25]  Clifford K. Ho,et al.  Reduction of radiative heat losses for solar thermal receivers , 2014, Optics & Photonics - Solar Energy + Applications.

[26]  G. Olalde,et al.  Aging of solar absorber materials under highly concentrated solar fluxes , 2014 .

[27]  A. R. Mahoney,et al.  Characterization of Pyromark 2500 Paint for High-Temperature Solar Receivers , 2014 .

[28]  Y. Sohn,et al.  Bond strength, bond stress and spallation mechanisms of thermal barrier coatings , 1999 .

[29]  V. S. Bakunov.  High-temperature creep in ceramics , 1997 .

[30]  T. Clyne,et al.  An analytical model for predicting residual stresses in progressively deposited coatings Part 3: Further development and applications , 1997 .

[31]  T. Clyne,et al.  An analytical model for predicting residual stresses in progressively deposited coatings Part 2: Cylindrical geometry , 1997 .