Preparation optimization of ATO particles by robust parameter design

[1]  Raju Pawade,et al.  Effect of process parameters on MRR, TWR and surface topography in ultrasonic machining of alumina–zirconia ceramic composite , 2014 .

[2]  Johanna Stiernstedt,et al.  Investigation of High Temperature Co-fired Ceramics sintering conditions using Taguchi Design of the experiment , 2014 .

[3]  M. Rahimi‐Nasrabadi,et al.  Eggshell bioactive membrane assisted synthesis of barium tungstate nanoparticles , 2014 .

[4]  H. Ahn,et al.  Structural, electrical, and optical properties of Sb-doped SnO2 transparent conductive oxides fabricated using an electrospray technique , 2014 .

[5]  H. M. Hosseini,et al.  Application of the statistical Taguchi method to optimize TiO2 nanoparticles synthesis by the hydrothermal assisted sol–gel technique , 2014 .

[6]  Masoud Farzaneh,et al.  An optimization of superhydrophobic polyvinylidene fluoride/zinc oxide materials using Taguchi method , 2014 .

[7]  Weifeng Zhang,et al.  Fabrication of p-type SnO2 films via pulsed laser deposition method by using Sb as dopant , 2013 .

[8]  S. Ramesh,et al.  Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method , 2013 .

[9]  R. Hong,et al.  Synthesis and electrical resistivity analysis of ATO-coated talc , 2012 .

[10]  Baoping Yang,et al.  Effect of calcining temperature and time on the characteristics of Sb-doped SnO2 nanoparticles synthesized by the sol–gel method , 2012 .

[11]  R. Hong,et al.  Preparation of ATO nanorods and electrical resistivity analysis , 2012 .

[12]  Z. Dai,et al.  Synthesis and thermal properties of antimony doped tin oxide/waterborne polyurethane nanocomposite films as heat insulating materials , 2011 .

[13]  Lei Song,et al.  Effect of antimony doped tin oxide on behaviors of waterborne polyurethane acrylate nanocomposite coatings , 2010 .

[14]  M. Jayachandran,et al.  Structural and electrical studies of nano structured Sn1−x SbxO2 (x = 0.0, 1, 2.5, 4.5 and 7 at%) prepared by co-precipitation method , 2010 .

[15]  A. Dvivedi,et al.  Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites , 2009 .

[16]  H. S. Shan,et al.  Optimization of tensile properties of evaporative pattern casting process through Taguchi's method , 2008 .

[17]  Y. Choa,et al.  The effect of parameters on the formation of ZnO nanoparticles by statistical experimental design method in vibrating milling process , 2008 .

[18]  Y. Choa,et al.  Optimization of parameters for the synthesis of zinc oxide nanoparticles by Taguchi robust design method , 2007 .

[19]  Fen Yang,et al.  Preparation of highly dispersed antimony-doped tin oxide nanopowders by azeotropic drying with isoamyl acetate , 2007 .

[20]  P. He,et al.  One-step synthesis of monodispersed antimony-doped tin oxide suspension , 2006 .