Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition

Abstract This paper presents a study on the thermal properties of a range of geopolymers in order to assess their suitability for high temperature applications such as thermal barriers, refractories and fire resistant structural members. Geopolymers were synthesised from five different fly ashes using sodium silicate and sodium aluminate solutions to achieve a set range of Si:Al compositional ratios. The thermo-physical, mechanical and microstructural properties of the geopolymers are presented and the effect of the source fly ash characteristics on the hardened product is discussed, as well as implications for high temperature applications. The amount and composition of the amorphous component (glass) of each of the fly ashes was determined by combining XRD and XRF results. It was found that the Si:Al ratio in the glass of the fly ashes strongly influenced the thermal performance of the geopolymers. Geopolymers synthesised from fly ashes with a high Si:Al (≥ 5) in the glass exhibited compressive strength gains and greater dimensional stability upon exposure to 1000 °C, whereas geopolymers synthesised from fly ashes with low Si:Al (

[1]  Jadambaa Temuujin,et al.  Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications , 2011 .

[2]  Brian H. O'Connor,et al.  Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite , 2003 .

[3]  Arie van Riessen,et al.  Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD , 2010 .

[4]  D. Southam,et al.  Determining the Reactivity of a Fly Ash for Production of Geopolymer , 2009 .

[5]  Prinya Chindaprasirt,et al.  Preparation of fly ash and rice husk ash geopolymer , 2009 .

[6]  N. L. Bowen,et al.  The system Na 2 O-Al 2 O 3 -SiO 2 , 1956 .

[7]  G. Corder,et al.  Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement , 2011 .

[8]  T. Bakharev,et al.  Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing , 2006 .

[9]  U. Schwertmann,et al.  Iron Oxides , 2003, SSSA Book Series.

[10]  R. Cioffi,et al.  Coal fly ash as raw material for the manufacture of geopolymer-based products. , 2008, Waste management.

[11]  H. Schneider,et al.  Structure and properties of mullite—A review , 2008 .

[12]  Haihong Li,et al.  Synthesis and mechanical properties of metakaolinite-based geopolymer , 2005 .

[13]  R. Howie,et al.  An Introduction to the Rock-Forming Minerals , 1966 .

[14]  Jadambaa Temuujin,et al.  Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation. , 2010, Journal of hazardous materials.

[15]  O. Manz,et al.  Coal fly ash: a retrospective and future look , 1999 .

[16]  J.S.J. van Deventer,et al.  The characterisation of source materials in fly ash-based geopolymers , 2003 .

[17]  Richard W. Goodwin.  Combustion Ash/Residue Management: An Engineering Perspective , 1994 .

[18]  Á. Palomo,et al.  Microstructure Development of Alkali-Activated Fly Ash Cement: A Descriptive Model , 2005 .

[19]  K. MacKenzie,et al.  Synthesis and thermal behaviour of potassium sialate geopolymers , 2003 .

[20]  P. Rohatgi,et al.  Crystallinity and selected properties of fly ash particles , 2002 .

[21]  J. Deventer,et al.  Thermal evolution of metakaolin geopolymers: Part 1 – Physical evolution , 2006 .

[22]  William D.A. Rickard,et al.  Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and α-Quartz , 2010 .

[23]  M. Weil,et al.  The influence of calcium content on the structure and thermal performance of fly ash based geopolymers , 2007 .

[24]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[25]  P. Sidhu.  Transformation of Trace Element-Substituted Maghemite to Hematite , 1988 .

[26]  Kwesi Sagoe-Crentsil,et al.  Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures , 2007 .

[27]  Kenneth J. D. MacKenzie,et al.  Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate , 2003 .

[28]  John L. Provis,et al.  Correlating mechanical and thermal properties of sodium silicate-fly ash geopolymers , 2009 .

[29]  Catherine L. Nicholson,et al.  The composition range of aluminosilicate geopolymers , 2005 .