An Internet of Things-enabled model-based approach to improving the energy efficiency of aluminum die casting processes

Abstract The demand for aluminum products is expected to continually increase. Die casting is an important technology for processing aluminum products. It is energy-intensive and its melting and holding sub-processes consume large amounts of energy, but in low energy efficiency. Therefore, improving their energy efficiency can significantly reduce energy costs and environmental impact. Based on an in-depth field survey of die casting factories, two obstacles hindering the melting and holding energy efficiency improvement were identified: 1) the determination of optimal furnace operation parameters in the production planning stage, and 2) the timely adjustment of furnace operation parameters when an incident occurs in the production stage. An Internet of Things-enabled model-based approach, including a parameter optimization model and energy-aware incident control strategy, was proposed to address these two issues. The proposed approach was validated in a die casting factory. Optimizing the furnace melting rate and maximum holding height saved 5%–9% cost, product stock was reduced by approximately 3.6% with the online adjustment of the furnace melt-stoppage time, and holding energy consumption was reduced by approximately 2% with the online control of the furnace standby mode. It was revealed that the practical value of the proposed approach was significant for industrial applications.

[1]  S. Jepson,et al.  Calculated Aluminum Oxidation Rates during Rotary Furnace Melting through Flue Gas Analysis — Part Two , 2016 .

[2]  Roger N. Lumley,et al.  An Evaluation of Quality Parameters for High Pressure Die Castings , 2011 .

[3]  S. Cecchel,et al.  Lightweighting in light commercial vehicles: cradle-to-grave life cycle assessment of a safety-relevant component , 2018, The International Journal of Life Cycle Assessment.

[4]  Tim Heinemann.  Energy and Resource Efficiency in Aluminium Die Casting , 2015 .

[5]  Sergio Usón,et al.  Exergy transfer analysis of an aluminum holding furnace , 2015 .

[7]  Zhang Zheng.  Establishment and Implementation of Mathematical Model for Ignition Loss in Baosteel HR Reheating Furnace , 2003 .

[8]  Weipeng Liu,et al.  An IoT-enabled Approach for Energy Monitoring and Analysis of Die Casting Machines , 2018 .

[9]  Kozo Saito,et al.  Performance of secondary aluminum melting: Thermodynamic analysis and plant-site experiments , 2006 .

[10]  P. Mullinger,et al.  Industrial and Process Furnaces: Principles, Design and Operation , 2008 .

[11]  David Schwam,et al.  Energy Saving Melting and Revert Reduction Technology: Melting Efficiency in Die Casting Operations , 2012 .

[12]  Jonathan M Cullen,et al.  Mapping the global flow of aluminum: from liquid aluminum to end-use goods. , 2013, Environmental science & technology.

[13]  S. Bonner.  A microstructural and kinetic study of molten aluminium oxidation in relation to dross formation , 2015 .

[14]  C. Cortés,et al.  Analysis of the thermal performance and convection effects in an aluminum holding furnace using CFD , 2015 .

[15]  Cynthia Belt.  Current State of Aluminum Melting and Holding Furnaces in Industry , 2015 .

[16]  Konstantinos Salonitis,et al.  Energy-Efficient Casting Processes , 2018, Materials Forming, Machining and Tribology.

[17]  E. Coker,et al.  The oxidation of aluminum at high temperature studied by Thermogravimetric Analysis and Differential Scanning Calorimetry. , 2013 .

[18]  Jerald R. Brevick,et al.  Energy Consumption of Die Casting Operations , 2004 .

[19]  Yuanfang Zhao,et al.  Data Driven Die Casting Smart Factory Solution , 2018 .

[20]  Huajun Cao,et al.  An IoT based framework for energy monitoring and analysis of die casting workshop , 2019, Procedia CIRP.