Controlled anisotropy in 3D printing of silica-based ceramic cores through oxidization reaction of aluminum powders

[1]  Jie Li,et al.  Microstructure and Crystallization Kinetics of Silica-Based Ceramic Cores with Enhanced High-Temperature Property , 2023, Materials.

[2]  C. Yan,et al.  Preparation of high-performance silica-based ceramic cores with B4C addition using selective laser sintering and SiO2–Al2O3 sol infiltration , 2022, Ceramics International.

[3]  X. Hou,et al.  A new strategy for long-term complex oxidation of MAX phases: database generation and oxidation kinetic model establishment with aid of machine learning , 2022, Acta Materialia.

[4]  Jinguo Li,et al.  In-situ synthesis of high-performance Al2O3-based ceramic cores reinforced with core-shell structures , 2022, Ceramics International.

[5]  Xiqing Xu,et al.  3D printing of silica-based ceramic cores reinforced by alumina with controlled anisotropy , 2022, Journal of Alloys and Compounds.

[6]  Yi-zhou Zhou,et al.  Defect control in digital light processing of high-solid-loading ceramic core , 2022, Ceramics International.

[7]  Ya-jie Guo,et al.  Anisotropy management on microstructure and mechanical property in 3D printing of silica-based ceramic cores , 2022, Journal of the European Ceramic Society.

[8]  X. Hou,et al.  Effect of Sn doping concentration on the oxidation of Al-containing MAX phase (Ti3AlC2) combining simulation with experiment , 2021, Fundamental research.

[9]  Jia‐Min Wu,et al.  Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration , 2021, Additive Manufacturing.

[10]  Jiaming Bai,et al.  3D printing of layered ceramic/carbon fiber composite with improved toughness , 2021, Additive Manufacturing.

[11]  Daniel S. Engstrøm,et al.  3D printing ceramic cores for investment casting of turbine blades, using LCD screen printers: The mixture design and characterisation , 2021, Journal of the European Ceramic Society.

[12]  Shuangming Li,et al.  Experimental study on high temperature performances of silica-based ceramic core for single crystal turbine blades , 2021, Ceramics International.

[13]  Q. Yan,et al.  Investigation of microstructure and properties in short carbon fiber reinforced silica-based ceramic cores via atmosphere sintering , 2021 .

[14]  Liang Zhou,et al.  Microstructure and properties evolution of silicon-based ceramic cores fabricated by 3D printing with stair-stepping effect control , 2021, Journal of the European Ceramic Society.

[15]  S. Schafföner,et al.  An overview of ceramic molds for investment casting of nickel superalloys , 2020 .

[16]  Yongsheng Liu,et al.  Silica strengthened alumina ceramic cores prepared by 3D printing , 2020 .

[17]  Yongsheng Liu,et al.  Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum , 2020 .

[18]  Xiqing Xu,et al.  Microstructure evolution and properties of silica-based ceramic cores reinforced by mullite fibers , 2020 .

[19]  Chunyang Liu,et al.  Enhanced thermal properties of silica-based ceramic cores prepared by coating alumina/mullite on the surface of fused silica powders , 2020 .

[20]  Shiduo Zhang,et al.  Porous fused silica ceramics prepared by gelcasting using multigrade fused silica powders , 2020, Journal of Alloys and Compounds.

[21]  Q. Zeng,et al.  Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores , 2020, Journal of Advanced Ceramics.

[22]  Jianbo Yu,et al.  Microstructure and properties of SiO2-based ceramic cores with ball-shaped powders by the preceramic polymer technique in N2 atmosphere , 2020 .

[23]  Z. Fan,et al.  Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores , 2020 .

[24]  K. Nickel,et al.  Progress in cognition of gas-solid interface reaction for non-oxide ceramics at high temperature , 2020 .

[25]  X. Su,et al.  Fabrication and casting simulation of composite ceramic cores with silica nanopowders , 2019, Ceramics International.

[26]  Z. Fan,et al.  Additive manufacturing of thin alumina ceramic cores using binder-jetting , 2019, Additive Manufacturing.

[27]  Jing Zhang,et al.  Process development of fabricating ceramic core using 3D printing technique , 2019, Materials Chemistry and Physics.

[28]  J. Halloran,et al.  Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing , 2019, Journal of the European Ceramic Society.

[29]  J. Yeo,et al.  Influence of silicon carbide as a mineralizer on mechanical and thermal properties of silica-based ceramic cores , 2016 .

[30]  Z. Eckel,et al.  Additive manufacturing of polymer-derived ceramics , 2016, Science.

[31]  Paolo Colombo,et al.  Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities , 2015 .

[32]  M. Kostecki,et al.  Ceramic cores for turbine blades via injection moulding , 2015 .

[33]  J. Halloran,et al.  Effect of Cristobalite on the Strength of Sintered Fused Silica Above and Below the Cristobalite Transformation , 2015 .

[34]  M. Faghihi-sani,et al.  Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting , 2013 .

[35]  Dichen Li,et al.  Review of main manufacturing processes of complex hollow turbine blades , 2013 .

[36]  Pradeep Kumar Jha,et al.  Developments in investment casting process—A review , 2012 .

[37]  R. Greenwood,et al.  The role of zircon particle size distribution, surface area and contamination on the properties of silica–zircon ceramic materials , 2011 .

[38]  B. Lawn,et al.  Making Ceramics "Ductile" , 1994, Science.

[39]  G. Ziegmann,et al.  Fabrication of continuous carbon fiber mesh for lightning protection of large-scale wind-turbine blade by electron beam cured printing , 2020 .