Preliminary assessment of sCO2 cycles for power generation in CSP solar tower plants

Abstract This work discusses a preliminary thermodynamic assessment of three different supercritical CO 2 (sCO 2 ) power cycles applied to a high temperature solar tower system, with maximum temperatures up to 800 °C. The thermal power is transferred from the solar receiver to the power block through KCl-MgCl 2 molten salts as heat transfer fluid, therefore an indirect cycle configuration is considered assuming a surrounded field as the one of Gemasolar plant. The most promising cycle configuration in terms of solar-to-electric efficiency is selected, optimizing the cycle turbine inlet temperature to achieve the best compromise between cycle and receiver performance: the highest efficiency at design conditions is achieved by the Recompression with Main Compression Intercooling (RMCI) configuration with a solar to electric efficiency of 24.5% and a maximum temperature of 750 °C. The yearly energy yield of the proposed power plant is estimated with a simplified approach and results in the range of 18.4%: the performance decay from design to average yearly conditions is mostly due to the optical and thermal efficiencies reduction (−10.8% and −16.4%, respectively).

[1]  Ennio Macchi,et al.  Comparison of Two Linear Collectors in Solar Thermal Plants: Parabolic Trough Versus Fresnel , 2013 .

[2]  Gary E Rochau,et al.  Supercritical CO2 Brayton Cycle Program Summary and Development Roadmap. , 2011 .

[3]  P. K. Falcone.  A handbook for solar central receiver design , 1986 .

[4]  Pardeep Garg,et al.  Supercritical carbon dioxide Brayton cycle for concentrated solar power , 2013 .

[5]  D. Yogi Goswami,et al.  Analysis of Advanced Supercritical Carbon Dioxide Power Cycles With a Bottoming Cycle for Concentrating Solar Power Applications , 2013 .

[6]  D. Williams,et al.  Assessment of Candidate Molten Salt Coolants for the NGNP/NHI Heat-Transfer Loop , 2006 .

[7]  Brian D. Iverson,et al.  Supercritical CO2 Brayton cycles for solar-thermal energy , 2013 .

[8]  Ya-Ling He,et al.  Integration between supercritical CO2 Brayton cycles and molten salt solar power towers: A review and a comprehensive comparison of different cycle layouts , 2017 .

[9]  Giampaolo Manzolini,et al.  Comparison of Linear and Point Focus Collectors in Solar Power Plants , 2013 .

[10]  Ennio Macchi,et al.  Development of an innovative code for the design of thermodynamic solar power plants part A: Code description and test case , 2011 .

[11]  Rajinesh Singh,et al.  Effects of relative volume-ratios on dynamic performance of a direct-heated supercritical carbon-dioxide closed Brayton cycle in a solar-thermal power plant , 2013 .

[12]  U. Okapuu,et al.  A Mean Line Prediction Method for Axial Flow Turbine Efficiency , 1982 .

[13]  Thomas M. Conboy,et al.  Metal corrosion in a supercritical carbon dioxide - liquid sodium power cycle. , 2012 .

[14]  David Sánchez,et al.  Comparison of Different Strategies for Heliostats Aiming Point in Cavity and External Tower Receivers , 2016 .

[15]  M. Anderson,et al.  Corrosion of austenitic alloys in high temperature supercritical carbon dioxide , 2012 .

[16]  David Sánchez,et al.  Supercritical carbon dioxide cycles for power generation: A review , 2017 .

[17]  Benjamín Monge Brenes.  Design of supercritical carbon dioxide centrifugal compressors , 2014 .

[18]  Craig Turchi,et al.  Thermodynamic Study of Advanced Supercritical Carbon Dioxide Power Cycles for High Performance Concentrating Solar Power Systems , 2012 .

[19]  D L Siebers,et al.  Estimating convective energy losses from solar central receivers , 1984 .

[20]  B L Kistler,et al.  A user's manual for DELSOL3: A computer code for calculating the optical performance and optimal system design for solar thermal central receiver plants , 1986 .

[21]  Seungjoon Baik,et al.  Review of supercritical CO2 power cycle technology and current status of research and development , 2015 .

[22]  G. Angelino.  Real Gas Effects in Carbon Dioxide Cycles , 1969 .

[23]  Ennio Macchi,et al.  Efficiency Prediction for Axial-Flow Turbines Operating with Nonconventional Fluids , 1981 .

[24]  Marco Astolfi,et al.  Heliostat aiming point optimization for external tower receiver , 2017 .

[25]  Gregory J. Kolb,et al.  Final Report on the Operation and Maintenance Improvement Program for Concentrating Solar Power Plants , 1999 .

[26]  Ennio Macchi,et al.  Comparison of different solar plants based on parabolic trough technology , 2012 .

[27]  M. R. Rodríguez-Sánchez,et al.  Comparison of simplified heat transfer models and CFD simulations for molten salt external receiver , 2014 .

[28]  Giampaolo Manzolini,et al.  An alternative methodology to treat solar radiation data for the optical efficiency estimate of different types of collectors , 2014 .

[29]  Gregory J. Kolb,et al.  Final Test and Evaluation Results from the Solar Two Project , 2002 .

[30]  Vaclav Dostal,et al.  High-Performance Supercritical Carbon Dioxide Cycle for Next-Generation Nuclear Reactors , 2006 .

[31]  Gary E Rochau,et al.  Operation and analysis of a supercritical CO2 Brayton cycle. , 2010 .

[32]  G. Morin,et al.  Comparison of Linear Fresnel and Parabolic Trough Collector power plants , 2012 .

[33]  Yann Le Moullec,et al.  Supercritical CO2 Brayton cycles for coal-fired power plants , 2016 .

[34]  C. Turchi,et al.  Thermodynamic Study of Advanced Supercritical Carbon Dioxide Power Cycles for Concentrating Solar Power Systems , 2013 .

[35]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0 , 2007 .

[36]  Eduardo Zarza,et al.  Parabolic-trough solar collectors and their applications , 2010 .

[37]  M. R. Rodríguez-Sánchez,et al.  Thermal design guidelines of solar power towers , 2014 .