Research at the University of Western Australia on Structure Protections Against Blast and Impact Loads

One of the research focus areas of the Structural Engineering Group in the School of Civil and Resource Engineering at the University of Western Australia (UWA) is analysis and design of structures against blast and impact loads. Our research activities spread in a wide spectrum related to structure protections against blast and impact loads, including modelling shock wave propagation and prediction of blast loads on structures; quantification of dynamic material properties and development of dynamic material models; developing fibre-reinforced polymer (FRP) materials with new fibre types; development of theoretical and numerical approaches to predict blast fragmentation; numerical simulation, laboratory impact tests and field blast tests to quantify the effectiveness of FRP strengthening of reinforced concrete structures; and simulation of damage and progressive collapse of building and bridge structures to blast load. The research approaches include theoretical derivations, numerical simulations, and laboratory impact and field blasting tests. These researches are funded by a few ARC Discovery projects. Some of them are carried out with collaborations with researchers in other universities in Australia and other countries. This paper summarises a few research projects, and demonstrates the research capabilities related to protective structures in UWA.

[1]  Hong Hao,et al.  NUMERICAL ANALYSIS OF CONCRETE MATERIAL PROPERTIES AT HIGH STRAIN RATE UNDER DIRECT TENSION , 2011 .

[2]  J. Lellep,et al.  Shear and bending response of a rigid-plastic beam subjected to impulsive loading , 2005 .

[3]  H. Hao,et al.  Modelling of compressive behaviour of concrete-like materials at high strain rate , 2008 .

[4]  Comite Euro-International du Beton.  Rc Elements Under Cyclic Loading: State of the Art Report , 1996 .

[5]  Abdeldjelil Belarbi,et al.  Blast Resistance of Fiber Reinforced Polymer (FRP) Retrofitted Un-Reinforced Masonry (URM) Walls with and Without Arching Action , 2004 .

[6]  Jonathan R. Porter,et al.  Failure Mechanisms of Polymer-Reinforced Concrete Masonry Walls Subjected to Blast , 2005 .

[7]  L. Malvar,et al.  A PLASTICITY CONCRETE MATERIAL MODEL FOR DYNA3D , 1997 .

[8]  Wai-Fah Chen,et al.  CONSTITUTIVE RELATIONS FOR CONCRETE , 1975 .

[9]  N. Jones,et al.  Shear and Bending Response of a Rigid-Plastic Beam to Partly Distributed Blast-Type Loading , 1986 .

[10]  Hong Hao,et al.  Experimental study of dynamic compressive properties of fibre reinforced concrete material with different fibres , 2012 .

[11]  T. Lok,et al.  Impact Response of Steel Fiber-Reinforced Concrete Using a Split Hopkinson Pressure Bar , 2004 .

[12]  Xin Huang,et al.  Damage Assessment of Reinforced Concrete Structural Elements Subjected to Blast Load , 2010 .

[13]  N. Jones,et al.  Shear and adiabatic shear failures in an impulsively loaded fully clamped beam , 1999 .

[14]  P. D. Smith,et al.  PROTECTION OF STRUCTURES AGAINST AIRBURST USING BARRIERS OF LIMITED ROBUSTNESS. , 1998 .

[15]  Masuhiro Beppu,et al.  Numerical analysis method for the RC and geological structures subjected to extreme loading by energetic materials , 2007 .

[16]  J. B. Martin,et al.  MODE APPROXIMATIONS FOR IMPULSIVELY LOADED RIGID PLASTIC STRUCTURES , 1965 .

[17]  Hong Hao,et al.  Prediction of airblast loads on structures behind a protective barrier , 2008 .

[18]  Guowei Ma,et al.  Modeling loading rate effect on crushing stress of metallic cellular materials , 2009 .

[19]  H. Hao,et al.  Concrete material model for high rate dynamic analysis , 2007 .

[20]  H. Hao,et al.  Numerical Analysis of Lateral Inertial Confinement Effects on Impact Test of Concrete Compressive Material Properties , 2010 .

[21]  K. Marchand,et al.  UFC 4-023-03: Design of Buildings to Resist Progressive Collapse , 2006 .

[22]  Yong Lu,et al.  In-structure shock of underground structures: A theoretical approach , 2010 .

[23]  Guowei Ma,et al.  In-structure shock assessment of underground structures with consideration of rigid body motion , 2011 .

[24]  Hong Hao,et al.  Numerical derivation of pressure-impulse diagrams for prediction of RC column damage to blast loads , 2008 .

[25]  P. D. Smith,et al.  The effectiveness of walls designed for the protection of structures against airblast from high explosives , 1995 .

[26]  Guowei Ma,et al.  P–I diagram method for combined failure modes of rigid-plastic beams , 2007 .

[27]  G. Ma,et al.  Energy absorption of double-layer foam cladding for blast alleviation , 2007 .

[28]  X. Q. Zhou,et al.  Modelling dynamic damage of concrete slab under blast loading , 2005 .

[29]  Patrick F. Acosta,et al.  OVERVIEW OF UFC 3-340-02, STRUCTURES TO RESIST THE EFFECTS OF ACCIDENTAL EXPLOSIONS , 2011 .

[30]  M. Kotsovos,et al.  Generalized Stress-Strain Relations for Concrete , 1978 .

[31]  Bibiana Luccioni,et al.  Concrete pavement slab under blast loads , 2006 .

[32]  H. Hao,et al.  Numerical Evaluation of the Influence of Aggregates on Concrete Compressive Strength at High Strain Rate , 2011 .

[33]  T. A. Rose,et al.  Design charts relating to protection of structures against airblast from high explosives , 1997 .

[34]  S. H. Perry,et al.  Compressive behaviour of concrete at high strain rates , 1991 .

[35]  Ching Chiaw Choo,et al.  Flexural Behavior of R/C Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets or Fabric , 2003 .

[36]  Guowei Ma,et al.  Simplified Damage Assessment Method for Buried Structures against External Blast Load , 2010 .

[37]  Wai-Fah Chen.  Plasticity in reinforced concrete , 1982 .

[38]  Guowei Ma,et al.  Double-layer floor to mitigate in-structure shock of underground structures: A conceptual design , 2012 .

[39]  Hong Hao,et al.  Numerical analysis of structural progressive collapse to blast loads , 2006 .

[40]  Tuan Ngo,et al.  Behavior of Ultrahigh-Strength Prestressed Concrete Panels Subjected to Blast Loading , 2007 .

[41]  K. Mosalam,et al.  Strengthening of two-way concrete slabs with FRP composite laminates , 2003 .

[42]  G. Ma,et al.  Effects of foam claddings for structure protection against blast loads , 2007 .

[43]  Theodor Krauthammer,et al.  Negative phase blast effects on glass panels , 2000 .

[44]  G. Ma,et al.  Damage assessment for buried structures against internal blast load , 2008 .

[45]  G. Ma,et al.  Analysis of foam claddings for blast alleviation , 2007 .

[46]  Azrul A Mutalib,et al.  Development of P-I diagrams for FRP strengthened RC columns , 2011 .