Efficient synthesis of dibenzopyran building block and its application in organic photovoltaics

Abstract The efficient synthesis of the 3,8-dibromodibenzopyran building block was achieved by a series of high yielding reactions. By utilization of the final dibenzopyran, two donor-acceptor alternating conjugated polymers were synthesized and their photophysical and electrochemical properties were examined. In addition, the Uv–vis behavior of the polymers was also described by virtue of DFT calculations to further understand the origin of different absorption bands; efficient charge transfer was observed for the optical transitions from the ground states to excited states in natural transition orbitals. Photovoltaic properties were tested in polymer solar cells with dibenzopyran-based polymer:PC 71 BM as the active layer; this configuration demonstrated a power conversion efficiency of 2.88% with a high V oc of 0.92 V, a J sc of 6.75 mA/cm 2 , and a comparable fill factor of 0.46.

[1]  Jin Young Kim,et al.  Processing additives for improved efficiency from bulk heterojunction solar cells. , 2008, Journal of the American Chemical Society.

[2]  Richard L. Martin.  NATURAL TRANSITION ORBITALS , 2003 .

[3]  Zhishan Bo,et al.  Dibenzothiophene-Based Planar Conjugated Polymers for High Efficiency Polymer Solar Cells , 2012 .

[4]  Porphyrin-incorporated 2D D-A polymers with over 8.5% polymer solar cell efficiency. , 2014, Advanced materials.

[5]  A. Pron,et al.  Polymers for electronics and spintronics. , 2013, Chemical Society reviews.

[6]  Yang Yang,et al.  An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11% , 2014, Advanced materials.

[7]  Zhishan Bo,et al.  Silole-containing polymers for high-efficiency polymer solar cells , 2011 .

[8]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[9]  Yang Yang,et al.  Synthesis of 5 H ‐ Dithieno [ 3 , 2 ‐ b : 2 ′ , 3 ′ ‐ d ] pyran as an Electron-Rich Building Block for Donor − Acceptor Type Low-Bandgap Polymers , 2013 .

[10]  Fei Huang,et al.  High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer. , 2013, Journal of the American Chemical Society.

[11]  W. You,et al.  Rational Design of High Performance Conjugated Polymers for Organic Solar Cells , 2012 .

[12]  Ning Wang,et al.  Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments. , 2013, Journal of the American Chemical Society.

[13]  Zhishan Bo,et al.  Conjugated polymers with 2,7-linked 3,6-difluorocarbazole as donor unit for high efficiency polymer solar cells , 2013 .

[14]  M. Andersson,et al.  A planar copolymer for high efficiency polymer solar cells. , 2009, Journal of the American Chemical Society.

[15]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[16]  Jacopo Tomasi,et al.  Fast Evaluation of Geometries and Properties of Excited Molecules in Solution: A Tamm-Dancoff Model with Application to 4-Dimethylaminobenzonitrile , 2000 .

[17]  W. Jo,et al.  Synthesis of 6H-benzo[c]chromene as a new electron-rich building block of conjugated alternating copolymers and its application to polymer solar cells , 2014 .

[18]  Shinuk Cho,et al.  Effect of substituted side chain on donor-acceptor conjugated copolymers , 2008 .

[19]  Daoben Zhu,et al.  A Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells , 2014, Advanced materials.

[20]  Q. Peng,et al.  Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells. , 2013, Journal of the American Chemical Society.

[21]  Gang Li,et al.  10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub‐Cells , 2013, Advanced materials.

[22]  O. Inganäs,et al.  Structure–property relationships of oligothiophene–isoindigo polymers for efficient bulk-heterojunction solar cells , 2014 .

[23]  P. Chou,et al.  Prominent Short-Circuit Currents of Fluorinated Quinoxaline-Based Copolymer Solar Cells with a Power Conversion Efficiency of 8.0% , 2012 .

[24]  Long Ye,et al.  Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain , 2014 .

[25]  Jianhui Hou,et al.  Synergistic Effect of Fluorination on Molecular Energy Level Modulation in Highly Efficient Photovoltaic Polymers , 2014, Advanced materials.

[26]  Junbiao Peng,et al.  High-performance polymer heterojunction solar cells of a polysilafluorene derivative , 2008 .

[27]  H. Seggern,et al.  Cross-linked liquid-crystalline materials: A possible strategy to ordered organic semiconductors , 2004 .

[28]  Vincenzo Barone,et al.  Time-dependent density functional theory for molecules in liquid solutions , 2001 .

[29]  W. Hu,et al.  9-Alkylidene-9H-Fluorene-Containing Polymer for High-Efficiency Polymer Solar Cells , 2011 .

[30]  Yingying Fu,et al.  Two dimensional photovoltaic copolymers based on new benzothiadiazole acceptors with diphenylamine-vinylene side chains , 2012 .