Development of an efficiency model for electronically commutated motor fan systems in air handling units

Motor-driven fan systems in air handling units (AHUs) account for 15.9% of the electricity consumption in commercial buildings. Currently electronically commutated motors (ECMs) have seen increasing applications to replace induction motors for energy savings. While efficiency models for motor-driven fan systems are essential for building energy management, there is no valid efficiency model for ECM fan systems. Therefore, this paper is to develop and validate an efficiency model for ECM fan systems, which can be applied to evaluate the motor input power at given fan airflow rate and head. First, an efficiency model is developed and calibrated using the manufacturer data of a 5.2 kW ECM fan. Innovatively a fan efficiency correction coefficient is introduced to consider the bias of affinity laws and the correlation between motor efficiency and motor shaft power is verified. Then the calibrated efficiency model is validated in an AHU with an array of four calibrated ECM fans. It was found that the proposed fan efficiency correction coefficient can improve the fan efficiency model accuracy by 20% at 20% rated motor speed. Moreover, the validation results show that the developed efficiency model can accurately evaluate the motor input power with an error of 0.096 kW or 1.8%.

[1]  Gang Wang.  Data-driven energy models for existing VFD-motor-pump systems , 2019 .

[2]  Andrea Trianni,et al.  Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption , 2019, Applied Energy.

[3]  T.G. Habetler,et al.  A Nonintrusive and In-Service Motor Efficiency Estimation Method using Air-Gap Torque with Considerations of Condition Monitoring , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[4]  Thomas Walski,et al.  Some Surprises in Estimating the Efficiency of Variable-Speed Pumps with the Pump Affinity Laws , 2003 .

[5]  Gang Wang,et al.  Comparison of different fan control strategies on a variable air volume systems through simulations and experiments , 2014 .

[6]  Hamid A. Toliyat,et al.  Handbook of Electric Motors , 2004 .

[7]  Andras Lelkes,et al.  ELECTRONICALLY COMMUTATED MOTORS FOR FAN APPLICATIONS , 2002 .

[8]  Mingsheng Liu,et al.  A novel method to determine the motor efficiency under variable speed operations and partial load conditions , 2015 .

[9]  Michael B. Pate,et al.  Experimental performance evaluations and empirical model developments of residential furnace blowers with PSC and ECM motors , 2016 .

[10]  Ezio Bassi,et al.  Stator Current and Motor Efficiency as Indicators for Different Types of Bearing Faults in Induction Motors , 2010, IEEE Transactions on Industrial Electronics.

[11]  Angus R. Simpson,et al.  Evaluating the Approximation of the Affinity Laws and Improving the Efficiency Estimate for Variable Speed Pumps , 2013 .

[12]  Paul Waide,et al.  Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems , 2011 .

[13]  Li Song,et al.  Development of a virtual pump water flow meter with a flow rate function of motor power and pump head , 2016 .

[14]  Manuel Burgos Payán,et al.  Techno-economic optimal power rating of induction motors , 2019, Applied Energy.