Conventional stable structures for space optics: The state of the art

Abstract An increasing demand for high-quality, low cost Earth imagery has led to the requirement for improved structural stability of the satellite instruments providing the imagery. This translates into camera structures capable of maintaining very high levels of dimensional stability over their lifetimes. There are several adequate technical solutions to this problem—for instance onboard mechanisms that can re-align optical components operationally, or unconventional materials such as silicon carbide. This paper investigates the current state of the art in solutions which are based on conventional materials and joining techniques to maintain high levels of stability without the need for mechanisms. The purpose of this article is to give an overview of the most important factors that should be taken into account when designing stable structures for space applications. Whilst the use in Earth observation has been highlighted in this paper the overview is applicable to all applications that use space optics. For completeness, the methods to verify the design have also been briefly described.

[1]  John G. Daly,et al.  Structural adhesives for bonding optics to metals: a study of optomechanical stability , 2001, SPIE Optics + Photonics.

[2]  Frank W. Gerlach,et al.  IKONOS technical performance assessment , 2001, SPIE Defense + Commercial Sensing.

[3]  Meshulam Groper,et al.  Microslip and macroslip in bolted joints , 1985 .

[4]  L. Peterson,et al.  Experiment Design to Quantify Material Microyield , 2003 .

[5]  Yvan Stockman,et al.  Optical methods for non-contact measurements of membranes , 2009 .

[6]  Jean-François Ferrero,et al.  Analysis of a dry friction problem under small displacements: application to a bolted joint , 2004 .

[7]  Richard A. Brand.  Strategies for stable composite structural design , 1992, Optics & Photonics.

[8]  John W. Figoski.  Alignment and test results of the QuickBird telescope using the Ball Optical System Test Facility , 1999, Optics & Photonics.

[9]  R. Starikov.  Fatigue behaviour of mechanically fastened aluminium joints tested in spectrum loading , 2004 .

[10]  L. Gorbatikh,et al.  Modeling of a locking mechanism between two rough surfaces under cyclic loading , 2006 .

[11]  Jason D. Hinkle,et al.  Microdynamic Design Requirements for Large Space Structures , 2003 .

[12]  R. Lewis,et al.  Microyielding in Fe-36Ni: Role of carbon and thermal processing , 1994 .

[13]  William W. Sable.  A probabilistic model of the thermal dimensional stability of composite structural components , 1992, Defense, Security, and Sensing.

[14]  M. B. Karamiş,et al.  Analysis of the friction behaviour of bolted joints , 1993 .

[15]  I. Deev,et al.  Effect of long-term exposure in the space environment on the microstructure of fibre-reinforced polymers , 1997 .

[16]  R. Cereseto,et al.  Ultra-light and stable composite structure to support and cool the ATLAS pixel detector barrel electronics modules , 2004 .

[17]  Raymond G. Ohl,et al.  Assembly and test-induced distortions of the FUSE mirrors: lessons learned , 1998, Astronomical Telescopes and Instrumentation.

[18]  N. J. Pagano,et al.  Steady-state cracking and edge effects in thermo-mechanical transverse cracking of cross-ply laminates , 1998 .

[19]  D. Bacon,et al.  Microyielding in alpha titanium , 1980 .

[20]  John D. Gerber,et al.  Structural design and analysis for an ultra low CTE optical bench for the Hubble Space Telescope corrective optics , 1992, Defense, Security, and Sensing.

[21]  G. Schoeppner,et al.  Dimensional Stability of Composite in a Space Thermal Environment , 1998, Mechanical Behavior of Advanced Materials.

[22]  Noah D. Manring.  Sensitivity Analysis of the Conical-Shaped Equivalent Model of a Bolted Joint , 2003 .

[23]  C. I. Grastataro,et al.  Recent developments in low cost stable structures for space , 1994 .

[24]  David O. Smallwood,et al.  Comparison of Finite Element Predictions to Measurements from the Sandia Microslip Experiment , 2000 .

[25]  Rob Dwyer-Joyce,et al.  Characterisation of Contact Pressure Distribution in Bolted Joints , 2006 .

[26]  John W. Figoski.  QuickBird telescope: the reality of large high-quality commercial space optics , 1999, Optics & Photonics.

[27]  John D. Pratt,et al.  Numerical Modeling of Bolted Lap Joint Behavior , 2002 .

[28]  E. G. Wolff.  Introduction to the Dimensional Stability of Composite Materials , 2004 .

[29]  Arthur R. Telkamp.  Recent developments with the Mars Observer Camera graphite/epoxy structure , 1992, Defense, Security, and Sensing.

[30]  John E. Mottershead,et al.  Simplified models of bolted joints under harmonic loading , 2005 .

[31]  J. E. Stumm,et al.  Graphite/Epoxy Material Characteristics And Design Techniques For Airborne Instrument Application , 1981, Optics & Photonics.

[32]  M. Hojo,et al.  Finite-element modeling of initial matrix failure in CFRP under static transverse tensile load , 2001 .

[33]  Marilyn E. Bruner,et al.  Use of graphite epoxy composites in the solar-A soft x-ray telescope , 1990, Defense, Security, and Sensing.

[34]  James D. Austin.  Moisture effects and control for the UVCS composite structure , 1992, Defense, Security, and Sensing.

[35]  Richard A. Brand,et al.  Evaluation of high-modulus pitch/cyanate material systems for dimensionally stable structures , 1992, Defense, Security, and Sensing.

[36]  Evaluation of the built-in stresses and residual distortions on cured composites for space antenna reflectors applications , 1987 .

[37]  Claude Bathias,et al.  An engineering point of view about fatigue of polymer matrix composite materials , 2006 .

[38]  Daniel Joseph Segalman,et al.  Modelling joint friction in structural dynamics , 2005 .

[39]  L. Gaul,et al.  Nonlinear dynamics of structures assembled by bolted joints , 1997 .

[40]  J. W. Berthold,et al.  Dimensional Stability of Fused Silica, Invar, and Several Ultra-low Thermal Expansion Materials , 1977 .

[41]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[42]  K. S. Kim,et al.  Residual stress development during processing of graphite/epoxy composites , 1989 .

[43]  Daniel Vukobratovich.  Rugged yet lightweight: how can we achieve both in optical instruments? , 1992, Optics + Photonics.

[44]  Ernest G. Wolff.  Moisture and viscoelastic effects on the dimensional stability of composites , 1990, Optics & Photonics.

[45]  Christopher Blair,et al.  Moisture absorption and mechanical properties for high-modulus Pitch 75 graphite-fiber-modified cyanate ester resin laminates , 1992, Defense, Security, and Sensing.

[46]  Jan-Anders E. Månson,et al.  Numerical Analysis of the Dimensional Stability of Thermoplastic Composites Using a Thermoviscoelastic Approach , 2002 .

[47]  G. Dean,et al.  The use of finite element methods for design with adhesives , 2001 .

[48]  R. W. Evans,et al.  A review of measurement techniques for the thermal expansion coefficient of metals and alloys at elevated temperatures , 2001 .

[49]  Jean-François Ferrero,et al.  Study of dry friction under small displacements and near-zero sliding velocity , 1997 .

[50]  D. G. Moffat,et al.  Vibratory Stress Relief: A Fundamental Study of Its Effectiveness , 1980 .

[51]  Benjamin P. Dolgin,et al.  Theoretical limits of dimensional stability for space structures , 1991, Optics & Photonics.

[52]  Naser S. Al-Huniti.  Computation of Member Stiffness in Bolted Connections Using the Finite Element Analysis , 2005 .

[53]  Qi-Chang He,et al.  A coupled experimental and numerical approach to the integrity of friction-grip connections in glass structures , 2007 .

[54]  Tom H. Miers,et al.  Ball global imaging system for Earth remote sensing , 2001, SPIE Remote Sensing.

[55]  G. Reese,et al.  Estimating the probability distribution of von Mises stress for structures undergoing random excitation. Part 1: Derivation , 1998 .

[56]  T. Hashida,et al.  Single-walled carbon nanotube-derived novel structural material , 2006 .

[57]  John E. Mottershead,et al.  Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load , 2006 .

[58]  C. W. Nelson,et al.  Thermal stress in bonded joints , 1979 .

[59]  Robert C. Romeo,et al.  Progress in 1m-class lightweight CFRP composite mirrors for the ULTRA Telescope , 2006, SPIE Astronomical Telescopes + Instrumentation.

[60]  Steven R. Vernon,et al.  Structural Design of the MSX Spacecraft , 1996 .

[61]  Terry S. Mast,et al.  Mirror Deformations Due To Thermal Expansion Of Inserts Bonded To Glass , 1987, Photonics West - Lasers and Applications in Science and Engineering.

[62]  Stephen F. Jacobs.  Dimensional stability of materials useful in optical engineering , 1986 .

[63]  David O. Smallwood,et al.  Damping Investigations of a Simplified Frictional Shear Joint , 2000 .

[64]  Arthur R. Telkamp,et al.  Design considerations for composite materials used in the Mars Observer Camera , 1990, Defense, Security, and Sensing.

[65]  Guglielmo S. Aglietti,et al.  Dimensional stability testing on a low cost space optical bench structure , 2009 .

[66]  Paul B. Willis,et al.  Dimensional stability of CFRP composites for space-based reflectors , 2001, SPIE Optics + Photonics.

[67]  Lee Peterson,et al.  Implications of Material Microyield for Gossamer Optical Reflectors , 2002 .

[68]  C. Manohar,et al.  Probability distribution of extremes of von mises stress in randomly vibrating structures , 2005 .

[69]  Mark C. Kilpatrick,et al.  Design of a precise and stable composite telescope structure for the Ultraviolet Coronagraph Spectrometer (UVCS) , 1992, Defense, Security, and Sensing.

[70]  Wei Chen,et al.  Structural damping caused by micro-slip along frictional interfaces , 2005 .

[71]  Victor L. Genberg,et al.  Finite element modeling of nearly incompressible bonds , 2002, SPIE Optics + Photonics.

[72]  H. Benabdallah,et al.  Static friction coefficient of some plastics against steel and aluminum under different contact conditions , 2007 .

[73]  E. G. Wolff,et al.  Prediction of the microyield strength of polymer matrix composites , 1988 .

[74]  Guglielmo S. Aglietti,et al.  Dimensional Stability Testing on a Space Optical Bench Structure , 2009 .

[75]  John D. Reid,et al.  Detailed modeling of bolted joints with slippage , 2005 .

[76]  Masaki Hojo,et al.  Microscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses , 2005 .

[77]  G. R. Almen,et al.  Fiberite 954: cyanate ester systems , 1992, Defense, Security, and Sensing.

[78]  E. G. Wolff.  Development and Testing of Zero CTE Materials , 1984 .

[79]  R. E. Maringer,et al.  Dimensional instability : an introduction , 1977 .

[80]  Peter W. Manders,et al.  Thin carbon-fiber prepregs for dimensionally critical structures , 1990, Defense, Security, and Sensing.

[81]  H. A. McKinstry,et al.  Very Low Thermal Expansion Coefficient Materials , 1989 .