Modified Johnson–Cook Constitutive Model of 18CrNiMo7-6 Alloy Steel under Ultrasonic Surface Burnishing Process

[1]  Bo Sun,et al.  Characterization of the plasticity parameters of the surface-modified layer of 18CrNiMo7-6 alloy steel after carburizing heat treatment through the indentation method , 2021 .

[2]  V. Ji,et al.  Analytical modeling and experimental verification of surface roughness in the ultrasonic-assisted ball burnishing of shaft targets , 2020, The International Journal of Advanced Manufacturing Technology.

[3]  H. Lalvani,et al.  Impact of a Multi-step Heat Treatment on Different Manufacturing Routes of 18CrNiMo7-6 Steel , 2020, Metallurgical and Materials Transactions A.

[4]  Chan K. Yang,et al.  Inverse determination of the flow curve in large range of strains for cylindrical tensile specimen , 2020 .

[5]  G. Geng,et al.  A modified Johnson-Cook model of 6061-T6 Aluminium profile , 2020, Australian Journal of Mechanical Engineering.

[6]  Liping Wang,et al.  Study on dynamic mechanical properties and constitutive model of 10B/Al composite compared with its matrix of high-purity aluminum , 2019, Journal of Materials Science.

[7]  Zhang Meng,et al.  Theoretical and experimental analysis of compressive residual stress field on 6061 aluminum alloy after ultrasonic surface rolling process , 2019, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[8]  M. Guagliano,et al.  Analytical modeling of ultrasonic surface burnishing process: Evaluation of residual stress field distribution and strip deflection , 2019, Materials Science and Engineering: A.

[9]  A. Mirzaei,et al.  Constitutive Modeling of 2024 Aluminum Alloy Based on the Johnson–Cook Model , 2019, Transactions of the Indian Institute of Metals.

[10]  Xipeng Xu,et al.  Research on the dynamic mechanical properties of C-plane sapphire under impact loading , 2018, Ceramics International.

[11]  Young Tae Cho,et al.  Determination of Johnson-Cook constitutive equation for Inconel 601 , 2018, Journal of Mechanical Science and Technology.

[12]  Zhonggang Wang,et al.  A modified Johnson–Cook model for 7N01 aluminum alloy under dynamic condition , 2017 .

[13]  Yuan-chun Huang,et al.  A Modified Johnson-Cook Model for Hot Deformation Behavior of 35CrMo Steel , 2017 .

[14]  Xiaofeng Wang,et al.  A modified Johnson Cook model for elevated temperature flow behavior of T24 steel , 2013 .

[15]  Y. C. Lin,et al.  A Phenomenological Constitutive Model for Describing Thermo-Viscoplastic Behavior of Al-Zn-Mg-Cu Alloy Under Hot Working Condition , 2012 .

[16]  Y. C. Lin,et al.  A phenomenological constitutive model for high temperature flow stress prediction of Al–Cu–Mg alloy , 2012 .

[17]  Y. C. Lin,et al.  Hot compressive deformation behavior of 7075 Al alloy under elevated temperature , 2012, Journal of Materials Science.

[18]  Y. C. Lin,et al.  A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel , 2010 .

[19]  Jae Beom Lee,et al.  A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis , 2009 .

[20]  M. D. Goel,et al.  Finite element analysis of AA1100 elasto-plastic behaviour using Johnson-Cook model , 2018 .

[21]  F. Klocke,et al.  Cutting Simulations of Two Gear Steels with Microstructure Dependent Material Laws , 2017 .

[22]  Fuguo Li,et al.  A Modified Johnson-Cook Constitutive Equation to Predict Hot Deformation Behavior of Ti-6Al-4V Alloy , 2014, Journal of Materials Engineering and Performance.