Separating zinc from copper and zinc mixed particles using vacuum sublimation

Abstract This paper reports a method for separating zinc from copper and zinc mixed particles by vacuum sublimation. The factors influencing zinc sublimation have been studied, such as particle size and vacuum degree. Also, the factors affecting the efficiency of zinc separation from the mixed particles have been investigated and optimized, including layer height, heating time, vacuum degree and so on. The efficiency of zinc separation from the mixed particles achieves 96.19 wt% when the layer height is 1.1 cm, the vacuum degree is 0.01–0.05 Pa, the heating temperature is 1123 K, and the heating time is 105 min. With these optimized parameters, the copper purity increases from 95.07 to 99.80 wt%. The results provide foundations for separating metals with high pressures from the mixed metallic particles of crushed electronic waste.

[1]  Ming H Wong,et al.  Spatial distribution of polybrominated diphenyl ethers and polychlorinated dibenzo-p-dioxins and dibenzofurans in soil and combusted residue at Guiyu, an electronic waste recycling site in southeast China. , 2007, Environmental science & technology.

[2]  Hugo Marcelo Veit,et al.  Using mechanical processing in recycling printed wiring boards , 2002 .

[3]  R. L. Pozzo,et al.  Removal of lead from printed circuit board scrap by an electrodissolution-delamination method , 1991 .

[4]  K C Cheung,et al.  Distribution of polycyclic aromatic hydrocarbons in soils at Guiyu area of China, affected by recycling of electronic waste using primitive technologies. , 2006, Chemosphere.

[5]  E. .. Mittemeijer.  Fundamentals of Materials Science , 2011 .

[6]  Rolf Widmer,et al.  Global perspectives on e-waste , 2005 .

[7]  Eric Forssberg,et al.  Mechanical recycling of waste electric and electronic equipment: a review. , 2003, Journal of hazardous materials.

[8]  Jia Li,et al.  Recycle technology for recovering resources and products from waste printed circuit boards. , 2007, Environmental science & technology.

[9]  Zhenming Xu,et al.  Application of vacuum metallurgy to separate pure metal from mixed metallic particles of crushed waste printed circuit board scraps. , 2008, Environmental science & technology.

[10]  Hugo Marcelo Veit,et al.  Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy. , 2006, Journal of hazardous materials.

[11]  D. Prasad,et al.  Purification of tellurium by single-run multiple vacuum distillation technique , 2005 .