On real-time optimization of airborne wind energy generators

Airborne wind energy generators aim to produce renewable energy by means of aerodynamic lift from tethered wings controlled to fly crosswind paths. The problem of optimizing the operation of such a generator in presence of limited information on wind speed and direction is considered, aiming to maximize the average power developed. First, a study of the traction force is presented for a general path parametrization. Then, the results of this analysis are exploited to design an algorithm to maximize the force, hence the power, in real-time. The algorithm uses only the measured traction force on the tether, and it is able to adapt the system's operation to maximize the average force with uncertain and time-varying wind. Numerical simulations are presented to highlight the effectiveness of the approach.

[1]  M. L. Loyd,et al.  Crosswind kite power (for large-scale wind power production) , 1980 .

[2]  Roland Schmehl,et al.  Flight Dynamics and Stability of a Tethered Inflatable Kiteplane , 2011 .

[3]  Lorenzo Fagiano,et al.  Power kites for wind energy generation , 2007 .

[4]  Rui Huang,et al.  Nonlinear Model Predictive Control and Dynamic Real Time Optimization for Large-scale Processes , 2010 .

[5]  Lorenzo Mario Fagiano,et al.  Control of Tethered Airfoils for High-Altitude Wind Energy Generation - Advanced control methods as key technologies for a breakthrough in renewable energy generation [Doctoral dissertation - Ph.D. in Information and System Engineering - Ciclo XXI - Politecnico di Torino] , 2009 .

[6]  Lorenzo Fagiano,et al.  On Modeling, Filtering and Automatic Control of Flexible Tethered Wings for Airborne Wind Energy , 2013 .

[7]  Lorenzo Fagiano,et al.  High Altitude Wind Energy Generation Using Controlled Power Kites , 2010, IEEE Transactions on Control Systems Technology.

[8]  Wubbo Johannes Ockels,et al.  Tracking control with adaption of kites , 2010, ArXiv.

[9]  Moritz Diehl,et al.  Nonlinear MPC of kites under varying wind conditions for a new class of large‐scale wind power generators , 2007 .

[10]  Dominique Bonvin,et al.  Real-Time Optimization for Kites , 2013, PSYCO.

[11]  Lorenzo Fagiano,et al.  Airborne Wind Energy: An overview , 2012, 2012 American Control Conference (ACC).

[12]  Lorenzo Fagiano,et al.  Automatic Crosswind Flight of Tethered Wings for Airborne Wind Energy: Modeling, Control Design, and Experimental Results , 2013, IEEE Transactions on Control Systems Technology.

[13]  Dario Piga,et al.  Optimization of airborne wind energy generators , 2012 .

[14]  Katya Scheinberg,et al.  Introduction to derivative-free optimization , 2010, Math. Comput..

[15]  Ilya V. Kolmanovsky,et al.  Modeling and control design for a prototype lighter-than-air wind energy system , 2012, 2012 American Control Conference (ACC).

[16]  P. Williams,et al.  Optimal Cross-Wind Towing and Power Generation with Tethered Kites , 2007 .

[17]  Moritz Diehl,et al.  Optimal control for power generating kites , 2007, 2007 European Control Conference (ECC).

[18]  Lorenzo Fagiano,et al.  Power Kites for Wind Energy Generation [Applications of Control] , 2007, IEEE Control Systems.