Preparation and characterization of highly lead-loaded red plastic scintillators under low energy x-rays

Abstract To the aim of development of a spatially resolved x-ray imaging system intended for Inertial Confinement Fusion (ICF) experiments at the Laser Mega Joule (LMJ) facility, new plastic scintillators have been designed. The main characteristics are the following: fast decay time, red emission and good x-rays photoelectric absorption in the range 10–40 keV. These scintillators are synthesized by copolymerization of different monomers with an organometallic compound. In this matrix two fluorescent compounds are embedded, allowing to shift the energy from the UV to the near IR spectrum. Several parameters were studied: fluorophores concentration, nature of the secondary fluorophore and lead concentration. An outstanding effective atomic number of 53 has been reached, for a loading of lead corresponding to 29 wt%. Thus, small cylinders were prepared and their performances under x-ray beam studied and compared with those of inorganic Cerium-doped Yttrium Aluminum Garnet reference scintillator (Y 3 Al 5 O 12 :Ce 3+ ). Eventually, such new scintillators or their next generation could replace expensive and brittle inorganic scintillators, inducing a strong industrial potential.

[1]  F. Dumont,et al.  Measurement of the complex refractive index of polyvinyltoluene in the UV, visible, and near IR: Application to the size determination of PVT latices , 1987 .

[2]  J. Spaulding,et al.  Liquid Scintillation Counting and Organic Scintillators , 1991 .

[3]  P. Cahill.  Toward red-emitting, radiation tolerant chromophores , 1992 .

[4]  Andreas Koch,et al.  X-ray imaging with submicrometer resolution employing transparent luminescent screens , 1998 .

[5]  Matthieu Hamel,et al.  N-(2′,5′-di-t-butylphenyl)-4-ethoxy-1,8-naphthalimide: A new fluorophore highly efficient for fast neutrons/gamma-rays discrimination in liquid media , 2009 .

[6]  E H Eberhardt.  Source-detector spectral matching factors. , 1968, Applied optics.

[7]  K. Makishima,et al.  Improvement of ceramic YAG(Ce) scintillators to (YGd)3Al5O12(Ce) for gamma-ray detectors , 2007 .

[8]  I. B. Berlman,et al.  A fast red-emitting plastic scintillator , 1980 .

[9]  S. Klein,et al.  Passage of particles through matter , 2000 .

[10]  M. Wurm,et al.  Fluorescence decay-time constants in organic liquid scintillators. , 2009, The Review of scientific instruments.

[11]  Laurent Porrès,et al.  Absolute Measurements of Photoluminescence Quantum Yields of Solutions Using an Integrating Sphere , 2006, Journal of Fluorescence.

[12]  Matthieu Hamel,et al.  Fluorescent 1,8-naphthalimides-containing polymers as plastic scintillators. An attempt for neutron-gamma discrimination , 2008 .

[13]  A. Vedda,et al.  Luminescence and scintillation properties of YAG:Ce single crystal and optical ceramics , 2007 .

[14]  Paul A. Jaanimagi,et al.  New constraints for plasma diagnostics development due to the harsh environment of MJ class lasers (invited) , 2004 .

[15]  M. D. Birowosuto,et al.  Novel γ‐ and X‐ray scintillator research: on the emission wavelength, light yield and time response of Ce3+ doped halide scintillators , 2009 .

[16]  Z. Cho,et al.  Tin and Lead Loaded Plastic Scintillators for Low Energy Gamma-Ray Detection with Particular Application to High Rate Detection , 1975, IEEE Transactions on Nuclear Science.

[17]  Bai Yang,et al.  Synthesis, characterization and property studies of Pb2+-containing optical resins , 2000 .

[18]  S Darbon,et al.  Development of an x-ray imaging system for the Laser Megajoule (LMJ). , 2010, The Review of scientific instruments.