Experimental study and theoretical analysis on the criterion of boiling of wall film for different fuels

[1]  Wu Zhang,et al.  Effect of spray impingement distance on piston top fuel adhesion in direct injection gasoline engines , 2020 .

[2]  Q. Yang,et al.  Characteristics of spray and wall wetting under flash-boiling and non-flashing conditions at varying ambient pressures , 2020 .

[3]  K. Nishida,et al.  Evaporation characteristics of fuel adhesion on the wall after spray impingement under different conditions through RIM measurement system , 2019 .

[4]  M. Jia,et al.  Experimental study on the boiling criterion of the fuel film formed from spray/wall impingement , 2019, Experiments in Fluids.

[5]  M. Bovo,et al.  Evaluation of thermal barrier coatings and surface roughness in a single-cylinder light-duty diesel engine , 2019, International Journal of Engine Research.

[6]  K. Nishida,et al.  Fuel adhesion characteristics under non-evaporation and evaporation conditions: Part 2 – Effect of ambient pressure , 2019, Fuel.

[7]  M. Jia,et al.  An analytical model of the heating and evaporation of bi-component wall film , 2019, International Communications in Heat and Mass Transfer.

[8]  F. Foucher,et al.  Generation and Oxidation of Soot due to Fuel Films Utilizing High Speed Visualization Techniques , 2019, SAE Technical Paper Series.

[9]  Wu Zhang,et al.  Fuel adhesion characteristics under non-evaporation and evaporation conditions: Part 1-effect of injection pressure , 2019, Fuel.

[10]  Keiya Nishida,et al.  Effect of temperature on fuel adhesion under spray-wall impingement condition , 2018, Fuel.

[11]  D. Reuss,et al.  Fuel film thickness measurements using refractive index matching in a stratified-charge SI engine operated on E30 and alkylate fuels , 2018 .

[12]  Alison B Hoxie,et al.  Combustion characteristics of ternary fuel Blends: Pentanol, butanol and vegetable oil , 2017 .

[13]  Hongchao Yin,et al.  A new flash boiling model for single droplet , 2017 .

[14]  Y. Hardalupas,et al.  Effects of Fuel Properties Associated with In-Cylinder Behavior on Particulate Number from a Direct Injection Gasoline Engine , 2017 .

[15]  T. Kuo,et al.  Experimental Investigation of Fuel Film Characteristics of Ethanol Impinging Spray at Ultra-Low Temperature , 2017 .

[16]  Gequn Shu,et al.  Experimental investigation on spray-wall impingement characteristics of n-butanol/diesel blended fuels , 2016 .

[17]  C. D. Rakopoulos,et al.  Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether , 2014 .

[18]  Andreas Kufferath,et al.  Gasoline Wall Films and Spray/Wall Interaction Analyzed by Infrared Thermography , 2014 .

[19]  G. Bruneaux,et al.  Time-Resolved Fuel Film Thickness Measurement for Direct Injection SI Engines Using Refractive Index Matching , 2011 .

[20]  António L. N. Moreira,et al.  Advances and challenges in explaining fuel spray impingement: How much of single droplet impact research is useful? , 2010 .

[21]  Gyungmin Choi,et al.  Numerical and experimental study on effect of wall geometry on wall impingement process of hollow-cone fuel spray under various ambient conditions , 2009 .

[22]  J. Ghandhi,et al.  Measurement of Diesel Spray Impingement and Fuel Film Characteristics Using Refractive Index Matching Method , 2007 .

[23]  Michael C. Drake,et al.  Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine , 2003 .

[24]  Christopher J. Rutland,et al.  MODELING FUEL FILM FORMATION AND WALL INTERACTION IN DIESEL ENGINES , 1996 .

[25]  Joseph Katz,et al.  Bubble nucleation in liquids , 1975 .

[26]  Xiang-rong Li,et al.  Impact of coolant temperature on piston wall-wetting and smoke generation in a stratified-charge DISI engine operated on E30 fuel , 2019, Proceedings of the Combustion Institute.

[27]  Wu Zhang,et al.  EXPERIMENTAL INVESTIGATION ON FUEL FILM FORMATION BY SPRAY IMPINGEMENT ON FLAT WALLS WITH DIFFERENT SURFACE ROUGHNESS , 2017 .

[28]  Yi Zheng,et al.  Measurement and Simulation of DI Spray Impingements and Film Characteristics , 2012 .

[29]  Miguel R. Oliveira Panão,et al.  Interpreting the influence of fuel spray impact on mixture preparation for HCCI combustion with port-fuel injection , 2007 .

[30]  Volker Sick,et al.  Tracer-LIF diagnostics: quantitative measurement of fuel concentration, temperature and fuel/air ratio in practical combustion systems , 2005 .