The effect of femoral component rotation on the kinematics of the tibiofemoral and patellofemoral joints after total knee arthroplasty

PurposeComplications after total knee arthroplasty (TKA) often involve the patellofemoral joint, and problems with patellar maltracking or lateral instability have sometimes been addressed by external rotation of the femoral component. This work sought to measure the changes of knee kinematics caused by TKA and then to optimise the restoration of both the patellofemoral and tibiofemoral joint kinematics, by variation of femoral component internal–external rotation.MethodsThe kinematics of the patella and tibia were measured in eight cadaveric knees during active extension motion. This was repeated with the knee intact, with a Genesis II TKA in the standard position (3° of external rotation) and with the femoral component at ±5° rotation from there.ResultsBoth patellar and tibial motions were significantly different from normal with the standard TKA rotation, with 3° tibial abduction at 90° flexion and reversal of the screw-home from 5° external rotation to 6° internal rotation. The patella was shifted medially 6 mm in flexion and tilted 7° more laterally near extension. Femoral rotation to address one abnormality caused increased abnormality in other degrees of freedom. Internal and then external rotation of 5° caused tibial abduction and then adduction of 5° at 90° flexion. These femoral rotations also caused increased patellar lateral tilt of 4° with femoral external rotation and decreased tilt by 4° with internal rotation. Thus, correction of tibial abduction in flexion, by external rotation of the femoral component, worsened the patellar lateral tilt near extension.ConclusionsIt was concluded that femoral rotation alone could not restore all aspects of both patellar and tibial kinematics to normal with this specific implant. The clinical relevance of this is that it appears to be inadvisable to reposition the femoral component, in an attempt to improve patellar tracking, if that repositioning may then cause abnormal tibiofemoral kinematics. Further, the pattern of patellar tracking, with the type of TKA used in this study, could not be adjusted to normal by femoral component rotation.

[1]  R. Bourne,et al.  The effect of built-in external femoral rotation on patellofemoral tracking in the genesis II total knee arthroplasty. , 2000, The Journal of arthroplasty.

[2]  R. Grelsamer,et al.  Patellofemoral complications following total knee arthroplasty. , 1997, The Journal of arthroplasty.

[3]  W A Hodge,et al.  Making Sense of Knee Arthroplasty Kinematics: News You Can Use , 2003, The Journal of bone and joint surgery. American volume.

[4]  A. Amis,et al.  The transpatellar approach for the knee in the laboratory , 2009, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[5]  J. Lonner,et al.  Lateral retinacular release as a function of femoral component rotation in total knee arthroplasty. , 2004, The Journal of arthroplasty.

[6]  J D Reuben,et al.  The effect of femoral component position on patellar tracking after total knee arthroplasty. , 1990, Clinical orthopaedics and related research.

[7]  Andrew D. Wiles,et al.  Accuracy assessment and interpretation for optical tracking systems , 2004, Medical Imaging: Image-Guided Procedures.

[8]  E S Grood,et al.  A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. , 1983, Journal of biomechanical engineering.

[9]  M. Pierrynowski.  Patellofemoral Joint Kinematics: The Circular Path of the Patella around the Trochlear Axis , 2011 .

[10]  C. B. Hovey,et al.  A computer model to simulate patellar biomechanics following total knee replacement: the effects of femoral component alignment. , 2001, Clinical biomechanics.

[11]  L. Blankevoort,et al.  Hamstrings and iliotibial band forces affect knee kinematics and contact pattern , 2000, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[12]  B. Philipps,et al.  Interindividual reproducibility in perioperative rotational alignment of femoral components in knee prosthetic surgery using the transepicondylar axis , 2002, Knee Surgery, Sports Traumatology, Arthroscopy.

[13]  R Huiskes,et al.  The three‐dimensional tracking pattern of the human patella , 1990, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[14]  Christopher M. Powers,et al.  The effects of axial and multi-plane loading of the extensor mechanism on the patellofemoral joint. , 1998, Clinical biomechanics.

[15]  K. An,et al.  Differences in patellar tracking and knee kinematics among three different total knee designs. , 1997, Clinical orthopaedics and related research.

[16]  K. Bose,et al.  Vastus medialis oblique: an anatomic and physiologic study. , 1980, Orthopedics.

[17]  Douglas A Dennis,et al.  Extensor mechanism problems following total knee replacement. , 2003, The journal of knee surgery.

[18]  H. Tullos,et al.  Anatomic Alignment of the Patellar Groove , 1996, Clinical orthopaedics and related research.

[19]  A. Amis,et al.  Persistence of the Mini Pivot Shift after Anatomically Placed Anterior Cruciate Ligament Reconstruction , 2006, Clinical orthopaedics and related research.

[20]  M. Akagi,et al.  Effect of rotational alignment on patellar tracking in total knee arthroplasty. , 1999, Clinical orthopaedics and related research.

[21]  R. Nagamine,et al.  Effect of medial displacement of the tibial tubercle on patellar position after rotational malposition of the femoral component in total knee arthroplasty. , 1996, The Journal of arthroplasty.

[22]  Shantanu Patil,et al.  The effect of femoral component malrotation on patellar biomechanics. , 2008, Journal of biomechanics.

[23]  Sakae Tanaka,et al.  The effect of femoral component rotation and asymmetry in total knee replacements. , 2002, Orthopedics.

[24]  A. Amis,et al.  Lateral force-displacement behaviour of the human patella and its variation with knee flexion--a biomechanical study in vitro. , 1998, Journal of biomechanics.

[25]  A. Amis,et al.  Incidence and mechanism of the pivot shift. An in vitro study. , 1999, Clinical orthopaedics and related research.

[26]  Anthony J. Petrella,et al.  Optimizing Femoral Component Rotation in Total Knee Arthroplasty , 2001, Clinical orthopaedics and related research.

[27]  A. Amis,et al.  Iliotibial band tension affects patellofemoral and tibiofemoral kinematics. , 2009, Journal of Biomechanics.

[28]  M. Malo,et al.  The Unstable Patella After Total Knee Arthroplasty: Etiology, Prevention, and Management , 2003, The Journal of the American Academy of Orthopaedic Surgeons.

[29]  Farzam Farahmand,et al.  Quantitative study of the quadriceps muscles and trochlear groove geometry related to instability of the patellofemoral joint , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[30]  J. J. Jacobs,et al.  Malrotation Causing Patellofemoral Complications After Total Knee Arthroplasty , 1998, Clinical orthopaedics and related research.