Study of the thermal behavior of the composite phase change material (PCM) room in summer and winter

Abstract The thermal behavior of the PCM in one season has been studied by many researchers. However, more and more attention was paid to the thermal behavior of new types of PCM room in several seasons. In this paper, the concept of composite PCM room was proposed, that is to place two PCMs of different melting temperature in one room. A composite PCM room and an ordinary room (room without PCM) were built. The indoor air temperature, thermal load leveling, standard deviation of the inner surface temperatures were tested and analyzed for both summer and winter. The thermal behavior simulation platform of the PCM wall was established by sensible heat capacity method together with TRNSYS. On this basis, the influence of melting temperature and thickness of the PCM layer to the heat absorbing/releasing performance were simulated. Results showed that (1) In summer, as compared to ordinary room, the PCM room can bring a temperature drop of about 4.28–7.7 °C during the day and reduce the indoor air temperature fluctuation by up to 28.8–67.8% during sunny days. The combined PCM room can significantly increase the heat absorbed from the room and decrease the heat released to the room. (2) In winter, the temperature rise was 6.93–9.48 °C for PCM room at winter night. The indoor air temperature fluctuation decreased 17.7–25.4% during sunny days. The combined PCM room can significantly increase the heat released to the room and decrease the heat absorbed from the room. In conclusion, the composite PCM room performed a better thermal behavior in both summer and winter.

[1]  Xing Jin,et al.  Thermal analysis of a double layer phase change material floor , 2011 .

[2]  Joseph Andrew Clarke,et al.  Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r , 2004 .

[3]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[4]  Mohammed M. Farid,et al.  Experimental and numerical investigations on the effect of using phase change materials for energy conservation in residential buildings , 2011 .

[5]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[6]  José Antonio Almendros-Ibáñez,et al.  A numerical study of external building walls containing phase change materials (PCM). , 2012 .

[7]  Yi Jiang,et al.  Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard , 2008 .

[8]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .

[9]  El Khadir Lakhal,et al.  Thermal performance of a greenhouse with a phase change material north wall , 2011 .

[10]  Natale Arcuri,et al.  Definition of a new set of parameters for the dynamic thermal characterization of PCM layers in the presence of one or more liquid-solid interfaces , 2017 .

[11]  S. Roy,et al.  Forced Convection Heat Transfer to Phase Change Material Slurries in Circular Ducts , 2000 .

[12]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[13]  Louis Gosselin,et al.  Internal surfaces including phase change materials for passive optimal shift of solar heat gain. , 2010 .

[14]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[15]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[16]  Mihai Cruceru,et al.  Novel concept of composite phase change material wall system for year-round thermal energy savings , 2010 .

[17]  Meng Zhang,et al.  On the heat transfer rate reduction of structural insulated panels (SIPs) outfitted with phase change materials (PCMs) , 2008 .

[18]  Romeu Vicente,et al.  Brick masonry walls with PCM macrocapsules: An experimental approach , 2014 .

[19]  Xin Wang,et al.  A new method to estimate optimal phase change material characteristics in a passive solar room , 2011 .

[20]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[21]  Jay G. Sanjayan,et al.  Energy saving potential of phase change materials in major Australian cities , 2014 .

[22]  Luisa F. Cabeza,et al.  An approach to the simulation of PCMs in building applications using TRNSYS , 2005 .

[23]  Yongsheng Lian,et al.  Numerical simulation of phase change material composite wallboard in a multi-layered building envelope , 2012 .

[24]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[25]  Mario A. Medina,et al.  Evaluation of the thermal performance of frame walls enhanced with paraffin and hydrated salt phase change materials using a dynamic wall simulator , 2010 .

[26]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[27]  Hong Ye,et al.  The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index , 2014 .

[28]  R. Velraj,et al.  Effect of double layer phase change material in building roof for year round thermal management , 2008 .

[29]  Xiaoqin Sun,et al.  Energy and economic analysis of a building enclosure outfitted with a phase change material board (PCMB) , 2014 .

[30]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[31]  Cai Zhe,et al.  Experimental research on the use of phase change materials in perforated brick rooms for cooling storage , 2013 .

[32]  Yongping Yang,et al.  Performance of shape-stabilized phase change material wallboard with periodical outside heat flux waves , 2011 .