An adaptive control strategy for the abrasive waterjet cutting process with the integration of vision-based monitoring and a neuro-genetic control strategy

This paper presents an integrated approach for the monitoring and control of abrasive waterjet (AWJ) cutting process. A machine-vision-based monitoring approach was proposed to obtain the bore diameter of the focusing nozzle from time to time. A neuro-genetic approach, proposed by Srinivasu and Ramesh Babu (Appl Soft Comput 8(1):809–819, 2008) was employed as a control strategy to modify the process parameters, such as water pressure, abrasive flow rate, and jet traverse rate, so as to maintain the desired depth of cut, with changes in the diameter of the focusing nozzle monitored with a machine vision system. By combining the monitoring and control strategies, an integrated approach for adaptive control of AWJ cutting process is realized. The effectiveness of the proposed integrated approach for adaptive control of AWJ cutting process was shown by comparing the results obtained from the experiments with the process parameters suggested by the control strategy to achieve the desired depth of cut. From the results of the study, it is seen that the proposed monitoring system is capable of monitoring the focusing nozzle diameter with a mean absolute deviation of 0.05 mm and that the neuro-genetic strategy is capable of modifying the controllable process parameters to maintain the desired depth of cut with a mean absolute deviation of 0.87 mm.

[1]  Radovan Kovacevic,et al.  Identification of Abrasive Waterjet Nozzle Wear Based on Parametric Spectrum Estimation of Acoustic Signal , 1994 .

[2]  John F. Canny,et al.  A Computational Approach to Edge Detection , 1986, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[3]  Radovan Kovacevic,et al.  Modeling of the influence of the abrasive waterjet cutting parameters on the depth of cut based on fuzzy rules , 1994 .

[4]  Zbigniew Michalewicz,et al.  Evolutionary Algorithms in Engineering Applications , 1997, Springer Berlin Heidelberg.

[5]  Radovan Kovacevic,et al.  Monitoring the depth of abrasive waterjet penetration , 1992 .

[6]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[7]  N. Ramesh Babu,et al.  A soft computing approach for controlling the quality of cut with abrasive waterjet cutting system experiencing orifice and focusing tube wear , 2007 .

[8]  Kalyanmoy Deb,et al.  Simulated Binary Crossover for Continuous Search Space , 1995, Complex Syst..

[9]  Issam Abu-Mahfouz,et al.  Drilling wear detection and classification using vibration signals and artificial neural network , 2003 .

[10]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[11]  John J. Grefenstette,et al.  Optimization of Control Parameters for Genetic Algorithms , 1986, IEEE Transactions on Systems, Man, and Cybernetics.

[12]  J. Kittler,et al.  Comparative study of Hough Transform methods for circle finding , 1990, Image Vis. Comput..

[13]  N. Ramesh Babu,et al.  A neuro-genetic approach for selection of process parameters in abrasive waterjet cutting considering variation in diameter of focusing nozzle , 2008, Appl. Soft Comput..

[14]  Radovan Kovacevic.  A new sensing system to monitor abrasive waterjet nozzle wear , 1991 .

[15]  George Cybenko,et al.  Approximation by superpositions of a sigmoidal function , 1992, Math. Control. Signals Syst..

[16]  Radovan Kovacevic,et al.  On-line monitoring of depth of cut in AWJ cutting , 2004 .

[17]  László Monostori,et al.  AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing , 2003 .

[18]  M. Hashish,et al.  Optimization factors in abrasive-waterjet machining , 1991 .

[19]  George Chryssolouris,et al.  A Comparison of Statistical and AI Approaches to the Selection of Process Parameters in Intelligent Machining , 1990 .

[20]  Steven Y. Liang,et al.  Machining Process Monitoring and Control: The State-of-the-Art , 2004 .

[21]  N. Ramesh Babu,et al.  A strategy for efficient and quality cutting of materials with abrasive waterjets considering the variation in orifice and focusing nozzle diameter , 2005 .

[22]  Sitarama P Chakravarthy,et al.  A hybrid approach for selection of optimal process parameters in abrasive water jet cutting , 2000 .