Partial Shading Analysis of Multistring PV Arrays and Derivation of Simplified MPP Expressions

In this paper, the electrical response of a partially shaded photovoltaic (PV) array, comprising several strings connected in parallel, is investigated. The PV array is simulated by employing an enhanced version of the widely used single-diode model, reformulated in an explicit manner employing the Lambert W function. The multiple maximum power points (MPPs) that appear on the P-V characteristic of the array in partial shading conditions are analyzed, in terms of their number and properties. Simplified empirical expressions are then derived to calculate the voltage, current, and power for each local MPP, at any irradiance level and temperature, using only datasheet information, in a most simple and straightforward manner, without resorting to detailed modeling and simulations. The derived formulae are validated using both simulation and experimental results.

[1]  V. Agarwal,et al.  MATLAB-Based Modeling to Study the Effects of Partial Shading on PV Array Characteristics , 2008, IEEE Transactions on Energy Conversion.

[2]  William A. Beckman,et al.  Improvement and validation of a model for photovoltaic array performance , 2006 .

[3]  V. Quaschning,et al.  Numerical simulation of current-voltage characteristics of photovoltaic systems with shaded solar cells , 1996 .

[4]  E. V. Paraskevadaki,et al.  Evaluation of MPP Voltage and Power of mc-Si PV Modules in Partial Shading Conditions , 2011, IEEE Transactions on Energy Conversion.

[5]  E. Muljadi,et al.  A cell-to-module-to-array detailed model for photovoltaic panels , 2012 .

[6]  Marko Topič,et al.  Self-shading losses of fixed free-standing PV arrays , 2011 .

[7]  Jari Leppaaho,et al.  Operation of series‐connected silicon‐based photovoltaic modules under partial shading conditions , 2012 .

[8]  Massimo Vitelli,et al.  Distributed maximum power point tracking of photovoltaic arrays: Novel approach and system analysis , 2008, IEEE Transactions on Industrial Electronics.

[9]  Chris Deline,et al.  A simplified model of uniform shading in large photovoltaic arrays , 2013 .

[10]  E. Karatepe,et al.  Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells , 2007 .

[11]  Marcelo Gradella Villalva,et al.  Comprehensive Approach to Modeling and Simulation of Photovoltaic Arrays , 2009, IEEE Transactions on Power Electronics.

[12]  D. D Nguyen,et al.  Modeling and Simulation of Solar PV Arrays under Changing Illumination Conditions , 2006, 2006 IEEE Workshops on Computers in Power Electronics.

[13]  Z. Salam,et al.  Tracking of maximum power point in partial shading condition using differential evolution (DE) , 2012, 2012 IEEE International Conference on Power and Energy (PECon).

[14]  Kashif Ishaque,et al.  An improved two-diode photovoltaic (PV) model for PV system , 2010, 2010 Joint International Conference on Power Electronics, Drives and Energy Systems & 2010 Power India.

[15]  Eduardo Lorenzo Pigueiras,et al.  Experimental Model to estimate shading losses on PV arrays , 2010 .

[16]  S. Silvestre,et al.  Effects of shadowing on photovoltaic module performance , 2008 .

[17]  S. Valkealahti,et al.  Power Losses in Long String and Parallel-Connected Short Strings of Series-Connected Silicon-Based Photovoltaic Modules Due to Partial Shading Conditions , 2012, IEEE Transactions on Energy Conversion.

[18]  F. Almonacid,et al.  A simple accurate model for the calculation of shading power losses in photovoltaic generators , 2013 .

[19]  Efstratios I. Batzelis,et al.  An Explicit PV String Model Based on the Lambert $W$ Function and Simplified MPP Expressions for Operation Under Partial Shading , 2014, IEEE Transactions on Sustainable Energy.

[20]  Alexander D. Cronin,et al.  A simple non-linear model for the effect of partial shade on PV systems , 2010, 2010 35th IEEE Photovoltaic Specialists Conference.

[21]  K. Naito,et al.  Simulation of I–V characteristics of a PV module with shaded PV cells , 2003 .

[22]  Jin Jiang,et al.  Modeling, Prediction, and Experimental Validations of Power Peaks of PV Arrays Under Partial Shading Conditions , 2014, IEEE Transactions on Sustainable Energy.

[23]  Vivek Agarwal,et al.  Maximum Power Point Tracking Scheme for PV Systems Operating Under Partially Shaded Conditions , 2008, IEEE Transactions on Industrial Electronics.

[24]  Guangyu Liu,et al.  A general modeling method for I–V characteristics of geometrically and electrically configured photovoltaic arrays , 2011 .

[25]  Kashif Ishaque,et al.  A Deterministic Particle Swarm Optimization Maximum Power Point Tracker for Photovoltaic System Under Partial Shading Condition , 2013, IEEE Transactions on Industrial Electronics.

[26]  Seppo Valkealahti,et al.  Effect of Photovoltaic Generator Components on the Number of MPPs Under Partial Shading Conditions , 2013, IEEE Transactions on Energy Conversion.

[27]  J. W. Bishop.  Computer simulation of the effects of electrical mismatches in photovoltaic cell interconnection circuits , 1988 .