Experimental and Analytical Studies of the Connector Insertion Phase

Studies of connectors for electric and electronic automotive systems have been and still are being pursued. The electrical connector reliability mainly depends on the connector insertion force. This force is related to the contact force which is imposed by the connector design. A nonintrusive technique for contact force determination by deflection measurement of the contact spring during insertion phase using a laser device has been developed. The following insertion parameters during the insertion stroke can be measured: contact deflection which yields the contact force, insertion force, and contact resistance. Regarding the results for real connectors, an experimental sample of a connector based on a cylindrical pin crossed with a cylindrical spring is proposed in this paper. With this simple setup, an mathematical model was developed and permits analysis of the influence of each parameter (width, spring radius, etc). Based on analysis of the influence of the spring width and of the gap, this study offers the possibility of optimizing the design of such connectors for use in the automotive industry.

[1]  Liu Hong-Yang.  The characteristic research of contact insertion and separation force in connector , 1990, Thirty-Sixth IEEE Conference on Electrical Contacts, and the Fifteenth International Conference on Electrical Contacts.

[2]  D. Travers,et al.  Materials and contact shape studies for automobile connector development , 1990, Thirty-Sixth IEEE Conference on Electrical Contacts, and the Fifteenth International Conference on Electrical Contacts.

[3]  R. Holm.  Electric contacts; theory and application , 1967 .

[4]  R. El Abdi,et al.  Experimental and theoretical investigations on connector insertion phase , 2003, Proceedings of the Forty-Ninth IEEE Holm Conference on Electrical Contacts, 2003..

[5]  M. Yovanovich,et al.  Elastoplastic constriction resistance model for sphere-flat contacts , 1996 .

[6]  M. Yovanovich,et al.  ELASTOPLASTIC CONSTRICTION RESISTANCE OF SPHERE / FLAT CONTACTS : THEORY AND EXPERIMENT , 1998 .

[7]  R. El Abdi,et al.  Experimental and analytical models of the connector insertion-extraction phase , 2004, Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts Electrical Contacts, 2004..

[8]  N. B. Jemaa.  Contacts conduction and switching in DC levels , 2002, Proceedings of the Forty-Eighth IEEE Holm Conference on Electrical Contacts.

[9]  J. L. Queffelec,et al.  Materials and contact shape studies for automobile connectors development , 1990 .