Improving thermal efficiency and stability of laser welding process for magnesium alloy by combining power modulation and subatmospheric pressure environment

[1]  Xiangshan Chen,et al.  Mitigation of porosity defects in fiber laser welding under low vacuum , 2020 .

[2]  Surjya K. Pal,et al.  Assessment of self-reacting bobbin tool friction stir welding for joining AZ31 magnesium alloy at inert gas environment , 2019 .

[3]  G. Ma,et al.  Effect of welding process parameters on hybrid GMAW-GTAW welding process of AZ31B magnesium alloy , 2018 .

[4]  Y. Shin,et al.  Prospects of laser welding technology in the automotive industry: A review , 2017 .

[5]  Jianxun Zhang,et al.  Single-pass hybrid laser-MIG welding of 8-mm-thick pure copper (T2) without preheating: weld geometry and integrity , 2017 .

[6]  Jianxun Zhang,et al.  Effects of double-pass welding and extrusion on properties of fiber laser welded 1.5-mm thick T2 copper joints , 2016 .

[7]  R. Fabbro,et al.  Analysis of the physical processes occurring during deep penetration laser welding under reduced pressure , 2016 .

[8]  R. Xiao,et al.  Effect of plume on weld penetration during high-power fiber laser welding , 2016 .

[9]  Uwe Reisgen,et al.  Sound Welding of Copper: Laser Beam Welding in Vacuum☆ , 2016 .

[10]  Jianxun Zhang,et al.  Microstructure and properties of the laser butt welded 1.5-mm thick T2 copper joint achieved at high welding speed , 2015 .

[11]  Jianxun Zhang,et al.  Single pass hybrid laser–MIG welding of 4-mm thick copper without preheating , 2015 .

[12]  Remy Fabbro,et al.  Explanation of penetration depth variation during laser welding under variable ambient pressure , 2015 .

[13]  D. Norris,et al.  Plasmonic Films Can Easily Be Better: Rules and Recipes , 2015, ACS photonics.

[14]  Jianxun Zhang,et al.  Modulated fiber laser welding of high reflective AZ31 , 2015 .

[15]  Yaocheng Zhang,et al.  Study of plasma in laser welding of magnesium alloy , 2014 .

[16]  K. Yousuke,et al.  Effect of reduced pressure atmosphere on weld geometry in partial penetration laser welding of stainless steel and aluminium alloy with high power and high brightness laser , 2014 .

[17]  A. Ostendorf,et al.  Impact of Process Parameters on the Laser-induced Nanoparticle Formation During Keyhole Welding under Remote Conditions , 2014 .

[18]  A. Ostendorf,et al.  Investigation of the Formation of Nanoparticles During Laser Remote Welding , 2013 .

[19]  Meiko Boley,et al.  High-Speed X-Ray Analysis of Spatter Formation in Laser Welding of Copper , 2013 .

[20]  P. Shcheglov.  Study of Vapour-Plasma Plume during High Power Fiber Laser Beam Infl uence on Metals , 2012 .

[21]  Rudolf Weber,et al.  Process Stabilization at welding Copper by Laser Power Modulation , 2011 .

[22]  S. Katayama,et al.  Development of Deep Penetration Welding Technology with High Brightness Laser under Vacuum , 2011 .

[23]  S. Na,et al.  Effect of particle size on the UV pulsed-laser scribing in computational fluid dynamics-based simulations , 2010 .

[24]  S. Na,et al.  Theoretical investigations on multiple-reflection and Rayleigh absorption–emission–scattering effects in laser drilling , 2010 .

[25]  C. Ambrosch-Draxl,et al.  Optical Constants and Inelastic Electron-Scattering Data for 17 Elemental Metals , 2009 .

[26]  D. Weckman,et al.  Pulsed Nd:YAG laser welding of copper using oxygenated assist gases , 2002 .

[27]  Seiji Katayama,et al.  Effect of vacuum on penetration and defects in laser welding , 2001 .

[28]  A. Matsunawa,et al.  The role of recoil pressure in energy balance during laser materials processing , 1997 .

[29]  C. Knight.  Theoretical Modeling of Rapid Surface Vaporization with Back Pressure , 1979 .

[30]  C. Kunz,et al.  Optical constants from the far infrared to the x-ray region: Mg, Al, Cu, Ag, Au, Bi, C, and Al 2 O 3 , 1975 .

[31]  Sergei I. Anisimov,et al.  Vaporization of Metal Absorbing Laser Radiation , 1968 .