Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach

The high strength to density ratio of titanium alloys coupled with excellent corrosion resistance even at elevated temperatures make them ideal for aerospace applications. Moreover, the biocompatibility of titanium also enables its widespread use in the biomedical and food processing industries. However, the difficulty in machining titanium and its alloys along with the high cost of its extraction from ore form presents a major economic constraint. In the context of machining economics, the wear map approach is very useful in identifying the most suitable machining parameters over a feedrate–cutting velocity plane. To date, wear maps have only been prepared for the machining of ferrous alloys. In this article, a review of the machinability of Ti-6Al-4V alloy is presented with emphasis on comparing the wear performance of various tool materials. In addition, a new wear map for Ti-6Al-4V alloy is presented based on unified turning tests using H13A grade carbide inserts. This wear map can be used as a guide in the selection of cutting variables that ensure the least tool wear rates. This article contrasts the occurrence of a safety zone in the case of machining steels to that of an avoidance zone for Ti-6Al-4V alloy.

[1]  J. Walter,et al.  Ion implantation of cobalt-tungsten carbide tools for machining titanium , 1993 .

[2]  D. G. Flom,et al.  High-Speed Machining of Metals , 1984 .

[3]  M. Fitzsimmons,et al.  Development of CVD WC–Co coatings ☆ , 2001 .

[4]  Keith Ridgway,et al.  The Effect of Cutting Tool Material and Edge Geometry on Tool Life and Workpiece Surface Integrity , 2006 .

[5]  Z. Y. Wang,et al.  Cryogenic machining of hard-to-cut materials , 2000 .

[6]  L. N. López de Lacalle,et al.  Advanced cutting conditions for the milling of aeronautical alloys , 2000 .

[7]  R. Komanduri,et al.  New observations on the mechanism of chip formation when machining titanium alloys , 1981 .

[8]  Emmanuel O. Ezugwu,et al.  High speed machining of aero-engine alloys , 2004 .

[9]  E. Ezugwu,et al.  An overview of the machinability of aeroengine alloys , 2003 .

[10]  Mahmudur Rahman,et al.  Binderless CBN tools, a breakthrough for machining titanium alloys , 2005 .

[11]  Ranga Komanduri,et al.  Evaluation of carbide grades and a new cutting geometry for machining titanium alloys , 1983 .

[12]  Herbert Schulz,et al.  High-Speed Machining , 1992 .

[13]  Hossam A. Kishawy,et al.  Tool performance and attainable surface quality during the machining of aerospace alloys using self-propelled rotary tools , 2004 .

[14]  Kim Seng Lee,et al.  Wear of TiC-coated carbide tools in dry turning , 1999 .

[15]  M. Nouari,et al.  Wear characteristics and performance of multi-layer CVD-coated alloyed carbide tool in dry end milling of titanium alloy , 2006 .

[16]  Yunn-Shiuan Liao,et al.  Mechanism of minimum quantity lubrication in high-speed milling of hardened steel , 2007 .

[17]  P. Molian,et al.  Lathe Turning of Titanium Using Pulsed Laser Deposited, Ultra‐Hard Boride Coatings of Carbide Inserts , 2003 .

[18]  Z. M. Wang,et al.  Titanium alloys and their machinability—a review , 1997 .

[19]  A. Jawaid,et al.  Tool wear characteristics in turning of titanium alloy Ti-6246 , 1999 .

[20]  A. B. Chattopadhyay,et al.  Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling , 2007 .

[21]  Seh Chun Lim,et al.  Wear maps for some uncoated cutting tools , 1996 .

[22]  C. Lim,et al.  Effective use of coated tools — the wear-map approach , 2001 .

[23]  Álisson Rocha Machado,et al.  Evaluation of the performance of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies , 2005 .

[24]  K.H.W. Seah,et al.  Wear maps for uncoated high-speed steel cutting tools , 1993 .