Influence of turbulent boundary conditions on RANS simulations of pollutant dispersion in mechanically ventilated enclosures with transitional slot Reynolds number

Abstract We investigate the influence of turbulent inlet boundary conditions on indoor air-flow characteristics and pollutant dispersion in Reynolds-averaged Navier–Stokes (RANS) simulations of an indoor ventilated enclosure at a transitional slot Reynolds number. A benchmark ventilation case is considered – for comparison experimental PIV data are available. Two turbulence closure models are included in the study, i.e., a low-Reynolds number k – ɛ model, and the SST k – ω model. When looking at velocity fields, we find that the influence of turbulent length scales at the inlet boundary on the indoor flow field is small. The influence of turbulence intensity (ranging between 2% and 30%) is considerably larger, in particular affecting the separation point of the inlet jet along the top wall. When further investigating the effect of turbulent conditions at the inlet on pollutant dispersion for a hypothetical indoor contaminant release case, we find that variations of inlet turbulent length scales lead to differences in pollutant concentration of up to 20%. Variations due to changes in inlet turbulent intensity lead to differences up to a factor 2. These findings strongly emphasize the importance of imposing realistic boundary conditions for turbulence models, refuting the common working hypothesis, often used in the indoor-ventilation literature, that varying these conditions has negligible impact on simulation results.

[1]  Kee-Chiang Chung,et al.  Effect of ventilation pattern on room air and contaminant distribution , 2001 .

[2]  Keh-Chin Chang,et al.  A Modified Low-Reynolds-Number Turbulence Model Applicable to Recirculating Flow in Pipe Expansion , 1995 .

[3]  M. Wolfshtein.  The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient , 1969 .

[4]  S-J Cao,et al.  On the construction and use of linear low-dimensional ventilation models. , 2012, Indoor air.

[5]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[6]  Jan Carmeliet,et al.  PIV measurements and analysis of transitional flow in a reduced- scale model: ventilation by a free plane jet with Coanda effect , 2012 .

[7]  P V Nielsen,et al.  Impact of turbulence anisotropy near walls in room airflow. , 2004, Indoor air.

[8]  Jamil A. Khan,et al.  Effects of inlet and exhaust locations and emitted gas density on indoor air contaminant concentrations , 2006 .

[9]  A. Dewan.  Tackling Turbulent Flows in Engineering , 2010 .

[10]  Andrei Shishkin,et al.  Simulation of turbulent thermal convection in complicated domains , 2009 .

[11]  R G Sextro,et al.  Pollutant dispersion in a large indoor space: Part 1 -- Scaled experiments using a water-filled model with occupants and furniture. , 2004, Indoor air.

[12]  Miao Wang,et al.  On a Hybrid RANS/LES Approach for Indoor Airflow Modeling (RP-1271) , 2010 .

[13]  Derek Dunn-Rankin,et al.  Measurement and prediction of indoor air flow in a model room , 2003 .

[14]  Zhao Zhang,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and 1 Turbulence in Enclosed Environments by CFD : Part-1 : 2 Summary of Prevalent Turbulence Models 3 4 , 2007 .

[15]  Denis Flick,et al.  Airflow characteristics within a slot-ventilated enclosure , 2005 .

[16]  Denis Flick,et al.  Wall air–jet characteristics and airflow patterns within a slot ventilated enclosure , 2003 .

[17]  Peter V. Nielsen,et al.  CFD and ventilation research. , 2011, Indoor air.

[18]  David A. Caughey,et al.  Comparison of Turbulence Modeling Strategies for Indoor Flows , 2009 .

[19]  Zhiqiang John Zhai,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and Turbulence in Enclosed Environments by CFD: Part 2—Comparison with Experimental Data from Literature , 2007 .

[20]  Peter V. Nielsen,et al.  Large Eddy Simulations of the Flow in Three-Dimensional Ventilated Room , 1996 .

[21]  Jianlei Niu,et al.  Using RANS turbulence models and Lagrangian approach to predict particle deposition in turbulent channel flows , 2012 .

[22]  Qingyan Chen,et al.  Ventilation performance prediction for buildings: A method overview and recent applications , 2009 .

[23]  S. Kato,et al.  CFD analysis on characteristics of contaminated indoor air ventilation and its application in the evaluation of the effects of contaminant inhalation by a human occupant , 2002 .

[24]  Da-Wen Sun,et al.  Applications of computational fluid dynamics (CFD) in the modelling and design of ventilation systems in the agricultural industry: a review. , 2007, Bioresource technology.

[25]  H. Awbi.  Ventilation of buildings , 1873 .

[26]  O. Shishkina,et al.  The use of Direct Numerical Simulations for solving industrial flow problems , 2011 .

[27]  K. C. Mendonça,et al.  Evaluating the influence of the width of inlet slot on the prediction of indoor airflow: Comparison with experimental data , 2009 .

[28]  Qingyan Chen,et al.  Assessment of Various Turbulence Models for Transitional Flows in an Enclosed Environment (RP-1271) , 2009 .

[29]  J. Carmeliet,et al.  PIV measurements of a plane wall jet in a confined space at transitional slot Reynolds numbers , 2012 .

[30]  Jamil A. Khan,et al.  An investigation of air inlet types in mixing ventilation , 2007 .

[31]  Jamil Khan,et al.  Performance of deterministic workplace exposure assessment models for various contaminant source, air inlet, and exhaust locations. , 2002, AIHA journal : a journal for the science of occupational and environmental health and safety.

[32]  Qingyan Chen,et al.  Large eddy simulation of indoor airflow with a filtered dynamic subgrid scale model , 2000 .

[33]  Qingyan Chen.  COMPARISON OF DIFFERENT k-ε MODELS FOR INDOOR AIR FLOW COMPUTATIONS , 1995 .