Back-EMF and rotor angular velocity estimation for a reaction sphere actuator

This paper presents a procedure to estimate the back-EMF voltages and the rotor angular velocity of a reaction sphere actuator for satellite attitude control. The reaction sphere is a permanent magnet synchronous spherical actuator whose rotor is magnetically levitated and can be accelerated about any desired axis. The spherical actuator is composed of an 8-pole permanent magnet spherical rotor and of a 20-coil stator. The developed technique to measure the back-EMF voltages is based on Faraday's law, in which the magnetic flux density is decomposed on a spherical harmonic basis, whose expansion parameters are derived from measurements of the radial component of the field collected from at least seven locations. Then, given the back-EMF voltages, the rotor angular velocity is derived employing the energy conservation principle. The resulting expressions are linear and are expressed in closed-form. Finally, the proposed method is validated numerically with finite element simulations and experimentally using a developed laboratory prototype.

[1]  K. Lee,et al.  Design, Modeling and Experiments of 3-DOF Electromagnetic Spherical Actuators , 2011 .

[2]  Yves Perriard,et al.  An open-loop control strategy of a reaction sphere for satellite attitude control , 2011, 2011 International Conference on Electrical Machines and Systems.

[3]  O. Chételat,et al.  Force and Torque Analytical Models of a Reaction Sphere Actuator Based on Spherical Harmonic Rotation and Decomposition , 2013, IEEE/ASME Transactions on Mechatronics.

[4]  Akio Gofuku,et al.  Development of a spherical stepping motor rotating around six axes , 2012 .

[5]  C. Xia,et al.  Design and Analysis of a Variable Arc Permanent Magnet Array for Spherical Motor , 2013, IEEE Transactions on Magnetics.

[6]  J. Junkins,et al.  Analytical Mechanics of Space Systems , 2003 .

[7]  E. Furlani.  Permanent Magnet and Electromechanical Devices: Materials, Analysis, and Applications , 2001 .

[8]  N. McClamroch,et al.  Rigid-Body Attitude Control , 2011, IEEE Control Systems.

[9]  Elena A. Lomonova,et al.  Design and optimization of a rotary actuator for a two degree-of-freedom zφ-module , 2009 .

[10]  Dong-Hoon Kim,et al.  Effects of Magnetic Pole Design on Orientation Torque for a Spherical Motor , 2013, IEEE/ASME Transactions on Mechatronics.

[11]  Yves Perriard,et al.  Hybrid FEM-analytical force and torque models of a reaction sphere actuator , 2013, 2013 International Electric Machines & Drives Conference.

[12]  Gregory S. Chirikjian,et al.  Kinematic design and commutation of a spherical stepper motor , 1999 .

[13]  Y. Perriard,et al.  Rotor Design Optimization for a Reaction Sphere Actuator , 2012, IEEE Transactions on Industry Applications.

[14]  Graham J. L. Kemp,et al.  Fast computation, rotation, and comparison of low resolution spherical harmonic molecular surfaces , 1999, J. Comput. Chem..

[15]  Marcel J. Sidi,et al.  Spacecraft Dynamics and Control: A Practical Engineering Approach , 1997 .

[16]  D. Howe,et al.  Design and control of a novel spherical permanent magnet actuator with three degrees of freedom , 2003 .

[17]  Liang Yan,et al.  Design and control of a three degree-of-freedom permanent magnet spherical actuator , 2012 .