Effect of Carbide Inoculants Additions in IN718 Fabricated by Selective Laser Melting Process

[1]  G. Zhu,et al.  Effect of TiC content on the mechanical and corrosion properties of Inconel 718 alloy fabricated by a high-throughput dual-feed laser metal deposition system , 2019, Journal of Alloys and Compounds.

[2]  Matthew S. Dargusch,et al.  Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing , 2019, Acta Materialia.

[3]  Huihui Yang,et al.  Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties , 2019, Materials Science and Engineering: A.

[4]  I. Ho,et al.  Microstructure evolution induced by inoculants during the selective laser melting of IN718 , 2018 .

[5]  X. Yao,et al.  Effects of the TiC Nanoparticle on Microstructures and Tensile Properties of Selective Laser Melted IN718/TiC Nanocomposites , 2018 .

[6]  Shu Beng Tor,et al.  Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review , 2018 .

[7]  Seung Ki Moon,et al.  Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting , 2017 .

[8]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[9]  Rui-di Li,et al.  Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing , 2017 .

[10]  An-Chou Yeh,et al.  Effects of processing routes on room temperature tensile strength and elongation for Inconel 718 , 2017 .

[11]  K. Kakehi,et al.  Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing , 2017 .

[12]  K. Kakehi,et al.  The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing , 2017 .

[13]  F. Deschaux-Beaume,et al.  A solidification model for the columnar to equiaxed transition in welding of a Cr-Mo ferritic stainless steel with Ti as inoculant , 2016 .

[14]  Jerome Solberg,et al.  Implementation of a thermomechanical model for the simulation of selective laser melting , 2014 .

[15]  Ming Gao,et al.  The microstructure and mechanical properties of deposited-IN718 by selective laser melting , 2012 .

[16]  C. Kuo,et al.  Effect of serrated grain boundaries on the creep property of Inconel 718 superalloy , 2011 .

[17]  C. Colin,et al.  As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting , 2011 .

[18]  J. Weertman,et al.  Theory of Steady‐State Creep Based on Dislocation Climb , 1955 .

[19]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[20]  O. Hunderi,et al.  On the Zener drag , 1985 .