A Biomechanical Investigation of Vertebroplasty in Osteoporotic Compression Fractures and in Prophylactic Vertebral Reinforcement

Study Design. Cadaveric single vertebrae were used to evaluate vertebroplasty as a prophylactic treatment and as an intervention for vertebral compression fractures. Objective. To investigate the biomechanical characteristics of prophylactic reinforcement and postfracture augmentation of cadaveric vertebrae. Summary of Background Data. Percutaneous vertebroplasty is a treatment option for osteoporotic vertebral compression fractures. Short-term results are promising, but longer-term studies have suggested a possible accelerated failure rate in the adjacent vertebral body. Limited research has been conducted into the effects of prophylactic vertebroplasty in osteoporotic vertebrae. This study aims to elucidate the biomechanical differences between the 2 treatment groups. Methods. Human vertebrae were assigned to 2 scenarios: Scenario 1 simulated a wedge fracture followed by cement augmentation; Scenario 2 involved prophylactic augmentation using vertebroplasty. Micro-CT imaging was performed to assess the bone mineral density, vertebral dimensions, fracture pattern, and cement volume. All augmented specimens were then compressed under an eccentric flexion load to failure. Results. Product of bone mineral density and endplate surface area gave a good prediction of failure strength when compared with actual failure strength of specimens in Scenario 1. Augmented vertebral bodies showed an average cement fill of 23.9% ± 8.07%. There was a significant postvertebroplasty increase in failure strength by a factor of 1.72 and 1.38 in Scenarios 1 and 2, respectively. There was a significant reduction in stiffness following augmentation for Scenario 1 (t = 3.5, P = 0.005). Stiffness of the vertebral body in Scenario 2 was significantly greater than observed in Scenario 1 (t = 4.4, P = 0.0002). Conclusion. Results suggest that augmentation of the vertebrae postfracture significantly increases failure load, while stiffness is not restored. Prophylactic augmentation was seen to increase failure strength in comparison to the predicted failure load. Stiffness appears to be maintained suggesting that prophylactic vertebroplasty maintains stiffness better than vertebroplasty postfracture.

[1]  K. Maier-Hauff,et al.  Percutaneous Vertebroplasty , 1997, Seminars in musculoskeletal radiology.

[2]  R. Wilcox,et al.  The Biomechanical Effect of Vertebroplasty on the Adjacent Vertebral Body: A Finite Element Study , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[3]  Nicole Ferko,et al.  Diagnosis and management of vertebral fractures in elderly adults. , 2002, The American journal of medicine.

[4]  H. Hagino [Epidemiology of osteoporotic fractures]. , 2003, Clinical calcium.

[5]  A. Gangi,et al.  Percutaneous vertebroplasty: history, technique and current perspectives. , 2004, Clinical radiology.

[6]  D. Kallmes,et al.  New fractures after vertebroplasty: adjacent fractures occur significantly sooner. , 2006, AJNR. American journal of neuroradiology.

[7]  S. Belkoff,et al.  Ex vivo biomechanical comparison of hydroxyapatite and polymethylmethacrylate cements for use with vertebroplasty. , 2002, AJNR. American journal of neuroradiology.

[8]  A. Silman,et al.  Health-related quality of life and radiographic vertebral fracture , 2004, Osteoporosis International.

[9]  N. Langrana,et al.  Biomechanical Effects of Unipedicular Vertebroplasty on Intact Vertebrae , 2003, Spine.

[10]  J. Nemes,et al.  Load shift of the intervertebral disc after a vertebroplasty: a finite-element study , 2003, European Spine Journal.

[11]  S. Belkoff,et al.  An in vitro biomechanical evaluation of bone cements used in percutaneous vertebroplasty. , 1999, Bone.

[12]  R. Rossi,et al.  P22. Percutaneous vertebroplasty: functional improvement in patients with osteoporotic compression fractures , 2003 .

[13]  Q. Dai,et al.  Biomechanical Comparison of Unipedicular Versus Bipedicular Kyphoplasty , 2005, Spine.

[14]  L. Nolte,et al.  Adjacent vertebral failure after vertebroplasty. A biomechanical investigation. , 2002, The Journal of bone and joint surgery. British volume.

[15]  S. H. Kan,et al.  Epidemiology of vertebral fractures in women. , 1989, American journal of epidemiology.

[16]  Joshua A Hirsch,et al.  Occurrence of new vertebral body fracture after percutaneous vertebroplasty in patients with osteoporosis. , 2003, Radiology.

[17]  P. Pollintine,et al.  Can Vertebroplasty Restore Normal Load-Bearing to Fractured Vertebrae? , 2005, Spine.

[18]  T. Keaveny,et al.  Finite element models predict in vitro vertebral body compressive strength better than quantitative computed tomography. , 2003, Bone.

[19]  J. Laredo,et al.  Complications of percutaneous vertebroplasty and their prevention , 2004, Skeletal Radiology.

[20]  Noshir A. Langrana,et al.  A Biomechanical Study of a Cervical Spine Stabilization Device: Roy‐Camille Plates , 1997, Spine.

[21]  T. Faciszewski,et al.  Quality of life following vertebroplasty. , 2004, The Journal of bone and joint surgery. American volume.

[22]  L. Claes,et al.  Biomechanical performance of the new BeadEx implant in the treatment of osteoporotic vertebral body compression fractures: restoration and maintenance of height and stability. , 2006, Clinical biomechanics.

[23]  A. Silman,et al.  Mortality Associated with Vertebral Deformity in Men and Women: Results from the European Prospective Osteoporosis Study (EPOS) , 1998, Osteoporosis International.

[24]  I. Lieberman,et al.  Biomechanical changes after the augmentation of experimental osteoporotic vertebral compression fractures in the cadaveric thoracic spine. , 2005, The spine journal : official journal of the North American Spine Society.

[25]  L. Gilula,et al.  Percutaneous vertebroplasty: an update. , 2005, Seminars in ultrasound, CT, and MR.

[26]  Jerry L. Old,et al.  Vertebral compression fractures in the elderly. , 2004, American family physician.

[27]  P. Brinckmann,et al.  Prediction of the Compressive Strength of Human Lumbar Vertebrae , 1989, Spine.

[28]  K. Sun,et al.  Biomechanics of Prophylactic Vertebral Reinforcement , 2004, Spine.

[29]  J. Lotz,et al.  The effect on anterior column loading due to different vertebral augmentation techniques. , 2005, Clinical biomechanics.

[30]  T. Keaveny,et al.  Effects of Bone Cement Volume and Distribution on Vertebral Stiffness After Vertebroplasty , 2001, Spine.

[31]  Sean Molloy,et al.  The Effect of Vertebral Body Percentage Fill on Mechanical Behavior During Percutaneous Vertebroplasty , 2003, Spine.

[32]  Lisa A Ferrara,et al.  Distribution of anterior cortical shear strain after a thoracic wedge compression fracture. , 2004, The spine journal : official journal of the North American Spine Society.

[33]  M. Schwenkglenks,et al.  A model of osteoporosis impact in Switzerland 2000–2020 , 2005, Osteoporosis International.

[34]  Sean Molloy,et al.  Effect of cement volume and placement on mechanical-property restoration resulting from vertebroplasty. , 2005, AJNR. American journal of neuroradiology.

[35]  L. Nolte,et al.  The Effect of Cement Augmentation on the Load Transfer in an Osteoporotic Functional Spinal Unit: Finite-Element Analysis , 2003, Spine.

[36]  M. Bostrom,et al.  Future Directions: Augmentation of Osteoporotic Vertebral Bodies , 1997 .