In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites

[1]  C. Lantuéjoul,et al.  Three consistent approaches of the multiple cracking process in 1D composites , 2010 .

[2]  Françoise Peyrin,et al.  Regularization of Phase Retrieval With Phase-Attenuation Duality Prior for 3-D Holotomography , 2010, IEEE Transactions on Image Processing.

[3]  E. Boller,et al.  X-Ray Tomographic Characterization of the Macroscopic Porosity of Chemical Vapor Infiltration SIC/SIC Composites: Effects on the Elastic Behavior , 2010 .

[4]  C. Sauder,et al.  Influence of Interface Characteristics on the Mechanical Properties of Hi‐Nicalon type‐S or Tyranno‐SA3 Fiber‐Reinforced SiC/SiC Minicomposites , 2010 .

[5]  Jacques Lamon,et al.  Stochastic approach to multiple cracking in composite systems based on the extreme-values theory , 2009 .

[6]  E. Maire,et al.  Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography , 2009 .

[7]  A. J. Moffat,et al.  Micromechanisms of damage in 0° splits in a [90/0]s composite material using synchrotron radiation computed tomography , 2008 .

[8]  P. Cloetens,et al.  Quantitative comparison of direct phase retrieval algorithms in in-line phase tomography. , 2008, Medical physics.

[9]  S. Stock.  Recent advances in X-ray microtomography applied to materials , 2008 .

[10]  G. Vaughan,et al.  Invited article: the fast readout low noise camera as a versatile x-ray detector for time resolved dispersive extended x-ray absorption fine structure and diffraction studies of dynamic problems in materials science, chemistry, and catalysis. , 2007, The Review of scientific instruments.

[11]  F. Beckmann,et al.  Visualising complex morphology of fatigue cracks in voxel based 3D datasets , 2006 .

[12]  Henry Proudhon,et al.  Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography , 2006 .

[13]  J. Kinney,et al.  MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour: Part 2 – Damage in SiC–Al monofilament composites tested in monotonic tension and fatigue , 2006 .

[14]  Peter Cloetens,et al.  A study of fracture of unidirectional composites using in situ high-resolution synchrotron X-ray microtomography , 2006 .

[15]  Anthony Gravouil,et al.  Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method , 2006 .

[16]  M. A. Verges,et al.  X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites , 2005 .

[17]  G. Morscher.  Tensile Stress Rupture of SiCf/SiCmMinicomposites with Carbon and Boron Nitride Interphases at Elevated Temperatures in Air , 2005 .

[18]  M. Preuss,et al.  X‐ray tomographic imaging of Ti/SiC composites , 2003, Journal of microscopy.

[19]  Jacques Lamon,et al.  A micromechanics-based approach to the mechanical behavior of brittle-matrix composites , 2001 .

[20]  J. Lamon,et al.  SiC/SiC minicomposites with nanoscale multilayered fibre coatings , 2001 .

[21]  Dpto,et al.  Room and elevated temperature tensile properties of single tow Hi-Nicalon, carbon interphase, CVI SiC matrix minicomposites , 2000 .

[22]  P. Cloetens,et al.  Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays , 1999 .

[23]  T. M. Breunig,et al.  New direct observations of crack closure processes in Al–Li 2090 T8E41 , 1999, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[24]  J. Lamon,et al.  Hi‐Nicalon/SiC Minicomposites with (Pyrocarbon/SiC)n Nanoscale Multilayered Interphases , 1999 .

[25]  N. Takeda,et al.  Modeling brittle and tough stress–strain behavior in unidirectional ceramic matrix composites , 1998 .

[26]  J. Kinney,et al.  Pore geometry in woven fiber structures: 0°/90° plain-weave cloth layup preform , 1998 .

[27]  Françoise Peyrin,et al.  Observation of microstructure and damage in materials by phase sensitive radiography and tomography , 1997 .

[28]  J. Lamon,et al.  Damage and failure in ceramic matrix minicomposites: Experimental study and model , 1997 .

[29]  Chung-Yuen Hui,et al.  Size effects in the distribution for strength of brittle matrix fibrous composites , 1997 .

[30]  Richard L. Smith,et al.  An exact closed form solution for fragmentation of Weibull fibers in a single filament composite with applications to fiber-reinforced ceramics , 1995 .

[31]  D. Jeulin,et al.  Fracture statistics of a unidirectional composite , 1995 .

[32]  William A. Curtin,et al.  THE TOUGH TO BRITTLE TRANSITION IN BRITTLE MATRIX COMPOSITES , 1993 .

[33]  Rishi Raj,et al.  Overview no. 100 Scalings in fracture probabilities for a brittle matrix fiber composite , 1992 .

[34]  William A. Curtin,et al.  THEORY OF MECHANICAL-PROPERTIES OF CERAMIC-MATRIX COMPOSITES , 1991 .

[35]  H. Daniels.  The statistical theory of the strength of bundles of threads. I , 1945, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[36]  Philip J. Withers,et al.  Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ , 2009 .

[37]  P. Cloetens,et al.  X-ray micro-tomography an attractive characterisation technique in materials science , 2003 .

[38]  M. Gurvich,et al.  Statistical simulation of fiber fragmentation in a single-fiber composite , 1997 .

[39]  William A. Curtin,et al.  Fiber pull-out and strain localization in ceramic matrix composites , 1993 .

[40]  S. L. Phoenix,et al.  Statistical issues in the fracture of brittle-matrix fibrous composites , 1993 .