DOWNDRAFT GASIFIER INDUSTRIAL EXPERIMENT

Economic and environmental considerations of fossil fuel use, such as its shortage and impact on the air quality, as well as contribution to the climate change process, has lead to the necessity to develop biomass-based energy supply systems. Biomass is a renewable resource, which is an alternative for the fossil fuel. However, use of solid biomass is limited by the applicable technologies – it is not possible to use it in gas turbines or internal combustion engines, which are applied for the efficient combined heat and power generation. Therefore, biomass gasification is considered as a means of perspective energy conversion. In gasification, the intrinsic chemical energy of solid biomass is converted into the energy of combustible gas that can be used in gas-consuming engines. Tar is a by-product of gasification; it mainly consists of organic substances heavier than benzene and leads to clogging of pipes and downstream equipment because of its condensation on the inner surfaces. Determination of tar mass concentration and composition depending on the gasifier operational mode is the first step for process optimization aiming to get the maximal yield of useful syngas. An industrial experiment is examined in the paper, the gasifier model is compared with the results of practical measurements, and the method for tar determination is tested? on a real object. The predicted tar value in the model was 58 g/mn3, practical measurements showed that gravimetric tar mass concentration is in the range of 0.54…5.64 g/mn3. DOI: https://doi.org/10.3846/aainz.2016.10

[1]  Miranda A. Schreurs,et al.  Breaking the impasse in the international climate negotiations: The potential of green technologies , 2012 .

[2]  Kitipong Jaojaruek,et al.  Experimental study of wood downdraft gasification for an improved producer gas quality through an innovative two-stage air and premixed air/gas supply approach. , 2011, Bioresource technology.

[3]  Kęstutis Zakarauskas,et al.  An evaluation of performance of automatically operated multi-fuel downdraft gasifier for energy production , 2014 .

[4]  T. A. Milne,et al.  Biomass Gasifier "Tars": Their Nature, Formation, and Conversion , 1998 .

[5]  W.A.K.G. Wan Azlina,et al.  Review of kinetic and equilibrium concepts for biomass tar modeling by using Aspen Plus , 2015 .

[6]  Peter McKendry,et al.  Energy production from biomass (Part 3): Gasification technologies. , 2002, Bioresource technology.

[7]  A. P. Mathews,et al.  Renewable Energy Technologies: Panacea for World Energy Security and Climate Change? , 2014, ANT/SEIT.

[8]  Juan F. Pérez,et al.  Effect of operating and design parameters on the gasification/combustion process of waste biomass in fixed bed downdraft reactors: An experimental study , 2012 .

[9]  Y. Son,et al.  Gasification and power generation characteristics of woody biomass utilizing a downdraft gasifier , 2011 .

[10]  Vladimir Rafael Melian Cobas,et al.  Biomass gasification in a downdraft gasifier with a two-stage air supply: Effect of operating conditions on gas quality , 2014 .

[11]  Tapas Kumar Patra,et al.  Biomass gasification models for downdraft gasifier: A state-of-the-art review , 2015 .