Use of X-ray computed tomography to investigate crack distribution and mineral dissemination in sphalerite ore particles

Abstract As the trends in mineral processing move towards the beneficiation of finer grained and more complex ore bodies, so too do the methods needed to understand and model these processes. During the heap leaching of low-grade ore bodies, the crack distribution and mineral dissemination in ore particles are important characteristics that determine the performance of sub-processes, such as the diffusion of reagents in and out of particle pores. Recent developments in X-ray computed tomography (CT) as an advanced diagnostic and nondestructive technique have indicated the potential for the technology to become a tool for the acquisition of 3-D mineralogical and structural data. The spatial distribution of cracks and mineral dissemination in particles derived from a sphalerite ore in the Northern Cape, South Africa, was characterized using a high-resolution industrial X-ray CT system. This paper describes the use of image analysis techniques including image segmentation, which uses a combination of thresholding and other methods to characterize and quantify crack and mineral dissemination in the sphalerite particles. The results are validated with those obtained using traditional techniques such as physical gas (with N 2 ) adsorption, mercury intrusion porosimetry, SEM and QEMSCAN. A comparison of the effect of different comminution devices (HPGR and Cone crusher) on crack generation is also given.

[1]  R. Swennen,et al.  Quantitative coal characterisation by means of microfocus X-ray computer tomography, colour image analysis and back-scattered scanning electron microscopy , 2001 .

[2]  W. E. Soll,et al.  Pore level imaging of fluid transport using synchrotron X-ray microtomography , 1996 .

[3]  S. Banwart,et al.  Weathering kinetics of waste rock from the Aitik copper mine, Sweden: scale dependent rate factors and pH controls in large column experiments , 1999 .

[4]  Jochen Petersen,et al.  Modelling zinc heap bioleaching , 2007 .

[5]  Bernard Long,et al.  CAT-scan in marine stratigraphy: a quantitative approach , 1995 .

[6]  Andrew L. Mular,et al.  Mineral Processing Plant Design , 1978 .

[7]  K. Kendall,et al.  Pore structure of cement/pozzolan composites by X-ray microtomography , 2005 .

[8]  Francesca Pagnanelli,et al.  Shrinking core model with variable activation energy: A kinetic model of manganiferous ore leaching with sulphuric acid and lactose , 2001 .

[9]  F C de Beer,et al.  Neutron radiography and other NDE tests of main rotor helicopter blades. , 2004, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[10]  Michael Daniel.  Energy efficient mineral liberation using HPGR technology , 2007 .

[11]  G. M. Miller.  Ore geotechnical effects on copper heap leach kinetics , 2003 .

[12]  X. Dai,et al.  Microtomography based identification of gold adsorption mechanisms, the measurement of activated carbon activity, and the effect of frothers on gold adsorption , 2008 .

[13]  M. Sahin,et al.  Determination of mass attenuation coefficients, effective atomic and electron numbers for some natural minerals , 2009 .

[14]  Mark A. Knackstedt,et al.  Pore scale characterization of carbonates at multiple scales: integration of micro-CT, BSEM and FIBSEM , 2010 .

[15]  Massimiliano Giona,et al.  Two-layer shrinking-core model: Parameter estimation for the reaction order in leaching processes , 2002 .

[16]  M. Malmström,et al.  Combined effects of spatially variable flow and mineralogy on the attenuation of acid mine drainage in groundwater , 2008 .

[17]  Jan D. Miller,et al.  3D characterization of individual multiphase particles in packed particle beds by X-ray microtomography (XMT) , 2007 .

[18]  Staf Roels,et al.  The use of microfocus X-ray computed tomography in characterising the hydration of a clay pellet/powder mixture , 2005 .

[19]  Elaine M. Wightman,et al.  The effect of breakage mechanism on the mineral liberation properties of sulphide ores , 2010 .

[20]  A. C. Apling,et al.  Evaluating high pressure milling for liberation enhancement and energy saving , 1997 .

[21]  A. Akcil,et al.  Bioleaching of complex zinc sulphides using mesophilic and thermophilic bacteria: comparative importance of pH and iron , 2004 .

[22]  Knona C. Liddell,et al.  Shrinking core models in hydrometallurgy: What students are not being told about the pseudo-steady approximation , 2005 .

[23]  Alkiviades C. Payatakes,et al.  Characterization of the pore structure of reservoir rocks with the aid of serial sectioning analysis, mercury porosimetry and network simulation , 2000 .

[24]  Rudy Swennen,et al.  Application of microfocus computed tomography in carbonate reservoir characterization: Possibilities and limitations , 2008 .

[25]  F. P. van der Meer,et al.  Flowsheet considerations for optimal use of high pressure grinding rolls , 2010 .

[26]  P. Gélinas,et al.  Comparison of methods for the estimation of pyrite oxidation rate in a waste rock pile at Mine Doyon site, Quebec, Canada , 2006 .

[27]  M. Wevers,et al.  Quantitative analysis of reservoir rocks by microfocus X-ray computerised tomography , 2000 .

[28]  D. Ridley,et al.  Cape Town, South Africa , 1986, Journal of clinical ultrasound : JCU.

[29]  G. Silva.  Relative importance of diffusion and reaction control during the bacterial and ferric sulphate leaching of zinc sulphide , 2004 .