Selective extraction of toluene from n-heptane using [emim][SCN] and [bmim][SCN] ionic liquids as solvents

Abstract Among the ionic liquids (ILs) studied so far in the liquid–liquid extraction of aromatic hydrocarbons, only a few of them have shown aromatic distribution ratios and aromatic/aliphatic selectivities considerably higher than those of conventional organic solvents, such as sulfolane. Moreover, these ILs had high dynamic viscosities that could limit their application at industrial scale. In this work, we have studied the performance of 1-ethyl-3-methylimidazolium thiocyanate ([emim][SCN]) and 1-butyl-3-methylimidazolium thiocyanate ([bmim][SCN]) ILs in the liquid–liquid extraction of toluene from n-heptane at 313.2 K. Densities, dynamic viscosities, and surface tensions of the ILs were also measured to evaluate their suitability as aromatic extraction solvents. In spite of the high selectivities and toluene distribution ratios of [bmim][SCN], its high dynamic viscosity could imply an important drawback. By contrast, the [emim][SCN] shown toluene/n-heptane selectivities three times higher of the sulfolane values and also substantially higher than those of other promising ILs. Futhermore, densities, viscosities, and surface tensions of [emim][SCN] were also appropriate to consider this IL as an alternative to organic solvents.

[1]  G. W. Meindersma,et al.  Hydrodynamic behavior analysis of a rotating disc contactor for aromatics extraction with 4-methyl-butyl-pyridinium·BF4 by CFD , 2010 .

[2]  J. Torrecilla,et al.  Liquid–liquid extraction of toluene from n-heptane using binary mixtures of N-butylpyridinium tetrafluoroborate and N-butylpyridinium bis(trifluoromethylsulfonyl)imide ionic liquids , 2012 .

[3]  N-butylpyridinium bis-(trifluoromethylsulfonyl)imide ionic liquids as solvents for the liquid-liquid extraction of aromatics from their mixtures with alkanes: Isomeric effect of the cation , 2011 .

[4]  Leslie S. Ettre,et al.  Static Headspace-Gas Chromatography: Theory and Practice , 1995 .

[5]  G. W. Meindersma,et al.  Liquid-Liquid equilibria for the three ternary systems (3-methyl-N-butylpyridinium dicyanamide + toluene + heptane), (1-butyl-3-methylimidazolium dicyanamide + toluene + heptane) and (1-butyl-3-methylimidazolium thiocyanate + toluene + heptane) at T = (313.15 and 348.15)K and p = 0.1 MPa , 2010 .

[6]  F. Mutelet,et al.  Extraction of benzene or thiophene from n-heptane using ionic liquids. NMR and thermodynamic study. , 2010, The journal of physical chemistry. B.

[7]  Julián García,et al.  Liquid–Liquid Extraction of Toluene from Heptane Using [emim][DCA], [bmim][DCA], and [emim][TCM] Ionic Liquids , 2013 .

[8]  J. Torrecilla,et al.  Thermophysical Properties of 1-Ethyl-3-methylimidazolium 1,1,2,2-Tetrafluoroethanesulfonate and 1-Ethyl-3-methylimidazolium Ethylsulfate Ionic Liquids as a Function of Temperature , 2011 .

[9]  G. W. Meindersma,et al.  Selection of ionic liquids for the extraction of aromatic hydrocarbons from aromatic/aliphatic mixtures , 2005 .

[10]  G. W. Meindersma,et al.  Cyano-containing ionic liquids for the extraction of aromatic hydrocarbons from an aromatic/aliphatic mixture , 2012, Science China Chemistry.

[11]  Robin D. Rogers,et al.  Ionic Liquids--Solvents of the Future? , 2003, Science.

[12]  C. Ghotbi,et al.  DENSITIES, VISCOSITIES AND SURFACE TENSIONS OF AQUEOUS MIXTURES OF SULFOLANE+TRIETHANOLAMINE AND SULFOLANE + DIISOPROPANOLAMINE , 2011 .

[13]  F. Mutelet,et al.  Partition coefficients of organic compounds in new imidazolium based ionic liquids using inverse gas chromatography. , 2009, Journal of chromatography. A.

[14]  Á. Domínguez,et al.  Separation of benzene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at several temperatures and atmospheric pressure: Effect of the size of the aliphatic hydrocarbons , 2010 .

[15]  A. Marciniak,et al.  Ternary (liquid + liquid) equilibria of {trifluorotris(perfluoroethyl)phosphate based ionic liquids + thiophene + heptane} , 2012 .

[16]  G. W. Meindersma,et al.  Ternary liquid-liquid equilibria for mixtures of toluene + n-heptane + an ionic liquid , 2006 .

[17]  A. B. de Haan,et al.  COSMO-RS-Based Ionic-Liquid Selection for Extractive Distillation Processes , 2012 .

[18]  Julián García,et al.  Physical Properties of N-Butylpyridinium Tetrafluoroborate and N-Butylpyridinium Bis(trifluoromethylsulfonyl)imide Binary Ionic Liquid Mixtures , 2012 .

[19]  U. Domańska,et al.  Density and Viscosity of Binary Mixtures of {1-Butyl-3-methylimidazolium Thiocyanate + 1-Heptanol, 1-Octanol, 1-Nonanol, or 1-Decanol} , 2010 .

[20]  J. Torrecilla,et al.  Liquid−Liquid Equilibria for the Ternary Systems {Heptane + Toluene + N-Butylpyridinium Tetrafluoroborate or N-Hexylpyridinium Tetrafluoroborate} at T = 313.2 K , 2010 .

[21]  Youdong Lin,et al.  Modeling Liquid−Liquid Equilibrium of Ionic Liquid Systems with NRTL, Electrolyte-NRTL, and UNIQUAC , 2008 .

[22]  Julián García,et al.  Physical Properties of Binary and Ternary Mixtures of 2-Propanol, Water, and 1-Butyl-3-methylimidazolium Tetrafluoroborate Ionic Liquid , 2012 .

[23]  D. Othmer,et al.  Liquid-Liquid Extraction Data - The Line Correlation , 1942 .

[24]  K. R. Seddon,et al.  Changing from an unusual high-temperature demixing to a UCST-type in mixtures of 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide and arenes , 2006 .

[25]  G. W. Meindersma,et al.  Ionic Liquids for Aromatics Extraction. Present Status and Future Outlook , 2010 .

[26]  J. Torrecilla,et al.  Liquid−Liquid Extraction of Toluene from Heptane Using 1-Alkyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide Ionic Liquids , 2011 .

[27]  K. R. Seddon,et al.  Separation of benzene and hexane by solvent extraction with 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ionic liquids: effect of the alkyl-substituent length. , 2007, The journal of physical chemistry. B.

[28]  J. Coutinho,et al.  Overview of the Liquid–Liquid Equilibria of Ternary Systems Composed of Ionic Liquid and Aromatic and Aliphatic Hydrocarbons, and Their Modeling by COSMO-RS , 2012 .

[29]  Julián García,et al.  Physical Characterization of an Aromatic Extraction Solvent Formed by [bpy][BF4] and [4bmpy][Tf2N] Mixed Ionic Liquids , 2013 .

[30]  J. Torrecilla,et al.  Separation of toluene from n-heptane by liquid–liquid extraction using binary mixtures of [bpy][BF4] and [4bmpy][Tf2N] ionic liquids as solvent , 2012 .

[31]  U. Domańska,et al.  Solvent extraction of aromatic sulfur compounds from n -heptane using the 1-ethyl-3-methylimidazolium tricyanomethanide ionic liquid , 2013 .

[32]  J. Torrecilla,et al.  Alkylsulfate-based ionic liquids in the liquid–liquid extraction of aromatic hydrocarbons , 2012 .

[33]  G. W. Meindersma,et al.  Physical properties of 3-methyl-N-butylpyridinium tetracyanoborate and 1-butyl-1-methylpyrrolidinium tetracyanoborate and ternary LLE data of [3-mebupy]B(CN)4 with an aromatic and an aliphatic hydrocarbon at T = 303.2 K and 328.2 K and p = 0.1 MPa , 2011 .

[34]  J. Prausnitz,et al.  LOCAL COMPOSITIONS IN THERMODYNAMIC EXCESS FUNCTIONS FOR LIQUID MIXTURES , 1968 .