论文信息 - Development of Barrel Heating via Induction in Injection Molding Machine

Development of Barrel Heating via Induction in Injection Molding Machine

A barrel heating system will be developed by using induction heating instead of current resistance heating. The experiment results showed the induction heating system can change successfully the current resistance heating system in heated the barrel of injection molding machine. A working coil coupled with magnetic concentrator bars was also considered. Finally, the uniformity of temperature distribution is compared between two barrel heating systems.

Sheng-Jye Hwang | Huy Tien Bui

[1] Sheng-Jye Hwang,et al. Development of barrel heating system in injection molding machine via induction heating , 2015 .

[2] S. L. Semiatin,et al. Elements of Induction Heating: Design Control and Applications , 1988 .

[3] Ming-Shyan Huang,et al. Effect of multi-layered induction coils on efficiency and uniformity of surface heating , 2010 .

[4] Sheng-Jye Hwang,et al. Simulation of infrared rapid surface heating for injection molding , 2006 .

[5] P. K. Seo,et al. Numerical analysis by new proposed coil design method in induction heating process for semi-solid forming and its experimental verification with globalization evaluation , 2003 .

[6] M. Jeng,et al. Rapid mold temperature control in injection molding by using steam heating , 2010 .

[7] S. Chen,et al. Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line , 2006 .

[8] Furong Gao,et al. Barrel temperature control during operation transition in injection molding , 2008 .

[9] Yaw-Jen Chang,et al. Rapid mold temperature variation for assisting the micro injection of high aspect ratio micro-feature parts using induction heating technology , 2006 .

[10] M. Enokizono,et al. Designing of suitable construction of high-frequency induction heating coil by using finite-element method , 2005, IEEE Transactions on Magnetics.